New Install AVH 4500

Cbtech · 04-25-2013, 02:12 PM

Quote:

Originally Posted by cossie1600

Nice, I couldnt get it to work with a relay as the new unit requires like a 2 sec delay before you can apply the ground to kill it

odd. i havent had any issues with mine working.

cheshirecat · 04-25-2013, 03:01 PM

Quote:

Originally Posted by Cbtech

Yes you need the harness; I had the bose setup and used the adapter
you also forgot the antenna adapter as well.

The Bose system does not use a traditional harness if you're changing out the head unit, as the speakers are dependent on external amplifiers. It does use an adapter to tap into the speakers if you plan on keeping them OEM.

I didn't mention the antenna adapter, as it's not considered part of the non-existent harness- it's an adapter, much like a PAC or AWSC.

Sorry if I wasn't being clear.

Infamous · 04-25-2013, 03:11 PM

I knew I was forgetting some stuff. Thanks guys. Antenna, wiring harness, iPod/3.5/USB Jack. I have a base model stereo.

kenchan · 04-25-2013, 03:13 PM

do you have like basic e-tape, taps, crimps, solder, etc?

kenchan · 04-25-2013, 04:02 PM

oh yah, i also did this when i installed my 4500 last month.

( Click to show/hide )

Cbtech · 05-28-2013, 04:49 PM

kind of bringing this one back but i have an issue and wanted to see if anyone else is having the same issue of glare? I have 30% on all windows but when the sun hits this stereo its IMPOSSIBLE to see the screen even with a slight light. someone on here said to up the brightness and contrast but that doesnt do anything. Anyone else run into this issue? any fixes? im almost tempted to replace it for something different cause of this glaring issue.

kenchan · 05-29-2013, 01:15 PM

hasn't bothered me.

but then, i dont stare at it or watch dvd's on it so dont know.

i know my other car the 2500BT is up higher on the dash so i do get glare at times.

Cbtech · 05-29-2013, 03:30 PM

Quote:

Originally Posted by kenchan

hasn't bothered me.

but then, i dont stare at it or watch dvd's on it so dont know.

i know my other car the 2500BT is up higher on the dash so i do get glare at times.

i notice all the time when i go to look at the reverse camera and cant see a thing. Also when trying to change the music

kenchan · 05-29-2013, 03:35 PM

Quote:

Originally Posted by Cbtech

i notice all the time when i go to look at the reverse camera and cant see a thing. Also when trying to change the music

huh, that's very odd. you might have a defective backlight maybe? can you tilt it by one increment and see if that helps?

Cbtech · 05-29-2013, 03:53 PM

I have it tilted x2 right now for better visibility. I might try to tilt it back to see if the glare goes away.

kenchan · 05-29-2013, 04:33 PM

yah, and try full brightness i guess since you're already thinking about selling it. who cares about longitivity now.

on my car i have my 4500BT at zero tilt, and i can see just fine.

Cbtech · 05-29-2013, 06:53 PM

well I really hate to sell this thing as it was a PTA to install and i dont want to have to take everything apart again...again...again...again

kenchan · 05-29-2013, 08:53 PM

it's not THAT big of a deal to install the HU, no?

Cbtech · 05-30-2013, 12:08 AM

Here is the glare from the direction that I'm sitting at.

uploadfromtaptalk1369890498278.jpg

sent via my wrist watch calculator

Infamous · 05-30-2013, 12:18 PM

What is this?

Where did you guys run your wires through the firewall to power your amp? Edit: nvm I found where to run the wires.

05-28-2013, 04:49 PM	#96 (permalink)
Cbtech A True Z Fanatic Join Date: Feb 2013 Location: Sacramento, CA Posts: 1,372 Drives: 40th Anniversary Rep Power: 15	kind of bringing this one back but i have an issue and wanted to see if anyone else is having the same issue of glare? I have 30% on all windows but when the sun hits this stereo its IMPOSSIBLE to see the screen even with a slight light. someone on here said to up the brightness and contrast but that doesnt do anything. Anyone else run into this issue? any fixes? im almost tempted to replace it for something different cause of this glaring issue. __________________ Are U in Sacramento or Central Valley California? Click here! Foglight Hardwire in less than 10 minutes! DIY: Automatic VDC off

05-29-2013, 03:53 PM	#100 (permalink)
Cbtech A True Z Fanatic Join Date: Feb 2013 Location: Sacramento, CA Posts: 1,372 Drives: 40th Anniversary Rep Power: 15	I have it tilted x2 right now for better visibility. I might try to tilt it back to see if the glare goes away. __________________ Are U in Sacramento or Central Valley California? Click here! Foglight Hardwire in less than 10 minutes! DIY: Automatic VDC off

05-29-2013, 06:53 PM	#102 (permalink)
Cbtech A True Z Fanatic Join Date: Feb 2013 Location: Sacramento, CA Posts: 1,372 Drives: 40th Anniversary Rep Power: 15	well I really hate to sell this thing as it was a PTA to install and i dont want to have to take everything apart again...again...again...again __________________ Are U in Sacramento or Central Valley California? Click here! Foglight Hardwire in less than 10 minutes! DIY: Automatic VDC off

05-30-2013, 12:08 AM	#104 (permalink)
Cbtech A True Z Fanatic Join Date: Feb 2013 Location: Sacramento, CA Posts: 1,372 Drives: 40th Anniversary Rep Power: 15	Here is the glare from the direction that I'm sitting at. uploadfromtaptalk1369890498278.jpg sent via my wrist watch calculator __________________ Are U in Sacramento or Central Valley California? Click here! Foglight Hardwire in less than 10 minutes! DIY: Automatic VDC off

05-30-2013, 12:18 PM	#105 (permalink)
Infamous Track Member Join Date: May 2012 Location: Las Vegas Posts: 656 Drives: 2012 Nissan 370z mt Rep Power: 13	What is this? Where did you guys run your wires through the firewall to power your amp? Edit: nvm I found where to run the wires. Last edited by Infamous; 05-30-2013 at 12:40 PM.

04-25-2013, 03:11 PM	#93 (permalink)
Infamous Track Member Join Date: May 2012 Location: Las Vegas Posts: 656 Drives: 2012 Nissan 370z mt Rep Power: 13	I knew I was forgetting some stuff. Thanks guys. Antenna, wiring harness, iPod/3.5/USB Jack. I have a base model stereo.

04-25-2013, 03:13 PM	#94 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141520	do you have like basic e-tape, taps, crimps, solder, etc?

04-25-2013, 04:02 PM	#95 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141520	oh yah, i also did this when i installed my 4500 last month. ( Click to show/hide )

05-29-2013, 01:15 PM	#97 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141520	hasn't bothered me. but then, i dont stare at it or watch dvd's on it so dont know. i know my other car the 2500BT is up higher on the dash so i do get glare at times.

05-29-2013, 04:33 PM	#101 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141520	yah, and try full brightness i guess since you're already thinking about selling it. who cares about longitivity now. on my car i have my 4500BT at zero tilt, and i can see just fine.

05-29-2013, 08:53 PM	#103 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141520	it's not THAT big of a deal to install the HU, no?

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
PLS Help! 4.08 FD Install?	JC671	Engine & Drivetrain	6	09-21-2012 08:55 PM
[FOR SALE] 2012 Premium GTR Wheels (used 1250 miles) $4500 shipped	88fc3sw/hx83	Parts for sale (Private Classifieds)	6	01-02-2012 11:42 AM
[FOR SALE] (OR) 2012 Premium GTR Wheels (only driven for ~1250 miles) 4500 shipped	88fc3sw/hx83	Parts for sale (Private Classifieds)	1	11-20-2011 07:42 PM
4500 RPM or above with short shifter	theDreamer	Nissan 370Z General Discussions	18	05-30-2011 10:43 AM
2009 Silver - Sport Pack, Automatic, 4500 Miles	BBALL99	370Z For Sale	0	06-22-2010 10:34 AM