Finished audio project...FINALLY

chops · 01-07-2011, 01:22 PM

i added another pic above..the enclosure does not impede access to the spare tire nor the tools/jack. i purposely built it so i could easily access the tools and the spare tire (hence why i went with an 8" sub). im not a bass head, just need some bass to fill in the low end frequencies so this was a good setup for me. theres probably 2-3inches worth of space behind the sub as well, so i could've used a different a different more SPL oriented sub, but im all about sound quality, hence the ID8.

the pic does show that there is a minor gap though, which is because of the vinyl wrap, and the hook and loop straps (velcro), but if i could do it over, i wouldve made the mold slightly smaller to account for the added thickness of the wrap

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Finished Photo!	Mozen	Member's 370Z Gallery	12	09-24-2010 07:46 PM
Audio Install Project Layout	Ambient	Audio & Video	21	08-27-2010 02:27 PM
470 hp 370z greddy tt finished!!!	pquaid	Nissan 370Z General Discussions	32	08-01-2010 09:30 AM
Headlight paint and LED project finished	res0zsfa	Exterior & Interior	15	04-25-2010 10:38 PM

01-07-2011, 01:22 PM	#11 (permalink)
chops A True Z Fanatic Join Date: Oct 2010 Location: NA Posts: 1,732 Drives: NA Rep Power: 23	i added another pic above..the enclosure does not impede access to the spare tire nor the tools/jack. i purposely built it so i could easily access the tools and the spare tire (hence why i went with an 8" sub). im not a bass head, just need some bass to fill in the low end frequencies so this was a good setup for me. theres probably 2-3inches worth of space behind the sub as well, so i could've used a different a different more SPL oriented sub, but im all about sound quality, hence the ID8. the pic does show that there is a minor gap though, which is because of the vinyl wrap, and the hook and loop straps (velcro), but if i could do it over, i wouldve made the mold slightly smaller to account for the added thickness of the wrap