Nissan 370Z Forum - Group Buy/Interest

Page 5 of 13

Show 40 post(s) from this thread on one page

Nissan 370Z Forum (http://www.the370z.com/)

- Audio & Video (http://www.the370z.com/audio-video/)

- - Group Buy/Interest - 2011 Rear View Camera (http://www.the370z.com/audio-video/26662-group-buy-interest-2011-rear-view-camera.html)

bdl99

11-08-2010 03:48 PM

Quote:

Originally Posted by axeman71 (Post 801249)

I have already done the speed sensor and parking brake bypasses based on DIYs I found on the forums here.

The parking brake bypass is permanent. You just ground the wire from the parking brake and you can watch the DVDs while moving, no side effects.

Bypassing the VSS sensor allows you to use all the menu items on the nav system while moving. This one needs a switch because when you bypass the VSS the navigation doesn't work well. The system only polls the GPS every 15 or 20 seconds and fills in the rest of the movement based on the speed sensor. So you switch the VSS bypass, use the nav menu, then switch the bypass off so the nav works well.

100% Correct, I just like a switch so I can return the car to factory position.

As I said, all I'm really doing here is giving people a solution that doesn't require cutting wires. If you are willing to cut wires then you don't need this. The only addition is the backup camera override and again I will post a DIY for anyone interested (Now I know there is already a DIY on NAV and DVD I will probably just search for it and add to it)

Jeff: Sorry for sidetracking this backup camera thread.

Jeffblue

11-08-2010 03:55 PM

Quote:

Originally Posted by bdl99 (Post 801302)

are you kidding? you are like the Jesus of this thread. :tup: don't be sorry. i've PM'd all the 2009 people that responded so that we can get moving with the navtool group buy and only 5 have responded, i feel bad b/c people are waiting, this thread is intended for answering questions and getting people the camera kits and thats exactly what its being used for. all is good.

r9u8t0

11-08-2010 04:08 PM

I'm for keeping the camera kit separate from the bypass kit if it means getting camera
system two to three weeks sooner and with no splicing or adding switches.

PW370z

11-08-2010 05:40 PM

Hello. I have 2010 w/ Navigation. I was interested in the back-up camera w/ harness. I was also interested in bypass kit. Could you please send me a PM w/ the cost of both? Thanks.

djpathfinder

11-08-2010 05:55 PM

post deleted...Sheesh! I don't know what happened. I should have refreshed my browser before my last post as there had been about 10 other responses that came up since the post I wanted to reply to. Sorry.

axeman71

11-08-2010 06:20 PM

Osiris, I went back and looked it up and you have to follow 2 DIYs to get it done. First look at rarwz's post on page 2 of the thread http://www.the370z.com/diy-section-d...era-dvd-2.html for info on taking the dash and radio apart to access the wiring harness. Then switch to terrycs's and toc2rta's post on this thread http://www.the370z.com/audio-video/1...ck-2010-a.html for which wire to ground for the parking break (it also shows the VSS wire you can interrupt with a switch for the nav bypass). Make sure to follow the pictures for the 2010s if that is what you have and not the 2009s.

Mize, my DIY for running the wires in a Roadster is here: http://www.the370z.com/nissan-370z-r...-roadster.html

N8GTOL

11-08-2010 11:34 PM

I wouldn't mind having it in 2 separate kits for the sake of time/convenience. And with respect to the bypass kit I would be fine with either option 3 or 4.

I like the idea of hard switches so I can visually see if a setting is ON/OFF and also I don't have to worry about hitting a button in my pocket by accident. The downside I can see to hard switches (especially us guys with the heated touring seats) is the lack of a clean install location. I suppose I could recess a switch board in the glove box opening so that the passenger would have to control the bypasses...this would prevent me from unsafe driving habits as wall.

Summy78695

11-09-2010 07:24 PM

Count me in, 2009.

Jeffblue

11-09-2010 11:21 PM

2009:
1. daisuke149
2. jpritche
3. kevin1985912
4. douglaslperry
5. ENT-Z
6. kenyada
7. Smallywood
8. fatboy1020
9. toner123
10. nissan ned
11. pensfan
12. phelan
13. Juruki
14. wilsonp
15. CharBoiler
16. Lloydy
17. Asmar
18. Zippin

Here is the list of people who expressed interest in the 2009 nav tool group buy. I pmed all of you the same message asking for your email address. So far, only the people have been crossed out have responded. If your name is not crossed out, please message me as soon as possible. This group buy is being held up b/c it can't move forward until i have 15 responses. (asmar i just sent you the message tonight so this doesn't really apply to you in terms of taking while to respond)

wilsonp

11-10-2010 12:27 AM

Did you forget to cross me out?

djpathfinder

11-10-2010 12:41 AM

No, you're listed as #14, your alter ego is #3. :roflpuke2:

DeLRo

11-10-2010 02:10 AM

Quote:

Originally Posted by djpathfinder (Post 803789)

No, you're listed as #14, your alter ego is #3. :roflpuke2:

:icon18:

Jeffblue

11-10-2010 06:21 AM

Quote:

Originally Posted by wilsonp (Post 803780)

Did you forget to cross me out?

edited, sorry, don't know how you got lsted twice. i made a spread sheet with all the info for everyone that responded, so thats how i'm keeping track.

dixon cider

11-10-2010 06:42 AM

Jeff. are the 2010 guys waiting until the '09's get done? Thx.

zippin

11-10-2010 06:58 AM

I'm in. 2009 touring.

Jeffblue

11-10-2010 07:10 AM

Quote:

Originally Posted by dixon cider (Post 803877)

Jeff. are the 2010 guys waiting until the '09's get done? Thx.

nope, totally separate:tup:

dixon cider

11-10-2010 07:21 AM

Quote:

Originally Posted by Jeffblue (Post 803892)

nope, totally separate:tup:

Cool!! What is the time frame for us? :excited:

bdl99

11-10-2010 07:26 AM

Quote:

Originally Posted by dixon cider (Post 803877)

Jeff. are the 2010 guys waiting until the '09's get done? Thx.

Jeff, can we start the list for 2010 guys? This is from a planning perspective, I'm not as worried about any reaching any total magic number.

The pricing will be as follows:
Kit excluding camera $100
Kit including Kenwood CMOS-200 camera $289

If we could collect who wants with or without cameras that would be great.

Jeffblue

11-10-2010 07:30 AM

Quote:

Originally Posted by bdl99 (Post 803904)

Great, yea go ahead, as long as you have everything worked out with AK, which it seems like you do. :tup:

I think you might want to start a new thread and put a link from here to there, specifically for the 2010 kit. perhaps have the 2 separate lists like you mentioned, one for w/ camera, one without. :tup:

wheee!

11-10-2010 08:12 AM

Kit with camera please. Approximate time frame for kit assembly and shipping? Before Xmas? After? No panic.... this is a great thread!

djpathfinder

11-10-2010 08:18 AM

Kit with camera too please.

wheee!

11-10-2010 08:21 AM

Correct my last message...

delivery time ANYTIME before djpathfinder gets his....

r9u8t0

11-10-2010 08:42 AM

Kit with camera

I'm in to for the 2010 kit with camera too.

RedBullRR

11-10-2010 09:13 AM

I'd like to purchase the rear view mirror with camera. Any chance on that?

Jeffblue

11-10-2010 10:13 AM

Quote:

Originally Posted by RedBullRR (Post 803974)

I'd like to purchase the rear view mirror with camera. Any chance on that?

thast a dealer item and is going to run you over $700

dixon cider

11-10-2010 11:24 AM

Yo! Kit and camera for me too.:tup:

Osiris

11-10-2010 11:37 AM

Kit + Camera And does the kit include the DIY instructions?

Any pricing for the bypass kit?

dixon cider

11-10-2010 12:06 PM

Come on '09'ers.....Jeff and bdl99 put a lot of time and effort into getting a real nice set up for us. He needs 9 more out of the 12 that expressed interest. Step up to the plate, please. :tiphat:

bdl99

11-10-2010 07:08 PM

Quote:

Originally Posted by Osiris (Post 804161)

Kit + Camera And does the kit include the DIY instructions?

Any pricing for the bypass kit?

Yes the kit includes DIY instructions.

No pricing on the bypass kit yet, will be working on that next.

LMBmikeZ

11-10-2010 07:31 PM

Add me to the 2010 list if we get one going........

I am in for the kit+cam also! Also interested in the bypass.......

PW370z

11-10-2010 09:26 PM

Count me in for a 2010 kit w/ camera!

As far as the bypass kit is concerned....I think the remote is the best option. You can just store it in the glove box or center console, and then you or your passenger can control the settings. It would be like a movable switch console and you don't have to change the interior.

dixon cider

11-11-2010 12:44 AM

Patiently waiting......:yum::yum::yum::yum:

bdl99

11-11-2010 06:52 AM

Quote:

Originally Posted by dixon cider (Post 805196)

Patiently waiting......:yum::yum::yum::yum:

We are almost there on the 2010 kit:

What I have gleamed from the thread so far is:

Kit without camera $100

axeman71
PW370z
Chris`I
LMBmikeZ

Kit with camera $289 (camera will be Kenwood CMOS-200)

hcolba
r9u8t0
N8GTOL
wheee!
Mize
tsolin01
dixon cider
djpathfinder
Osiris
cramcram
fhlashsf
youknow17
ClemsonWill
xTIMMYxCOREx

Please PM me if you want to be added or removed. Then within the next couple of days I will send details on ordering. Lead time will be 3-5 days depending on numbers.

Kit will include full instructions and I'm available to answer any questions. If you are in NJ (or willing to travel) I'm also happy to help you install.

Jeffblue

11-11-2010 07:01 AM

Quote:

Originally Posted by bdl99 (Post 805310)

We are almost there on the 2010 kit:

What I have gleamed from the thread so far is:

Kit without camera $100
axeman71

Kit with camera $289 (camera will be Kenwood CMOS-200)
hcolba
r9u8t0
N8GTOL
wheee!
Mize
tsolin01
PW370z
dixon cider
djpathfinder
Osiris
LMBmikeZ

Please PM me if you want to be added or removed. Then within the next couple of days I will send details on ordering. Lead time will be 3-5 days depending on numbers.

Kit will include full instructions and I'm available to answer any questions. If you are in NJ (or willing to travel) I'm also happy to help you install.

nice to see this moving along :tup:

PW370z

11-11-2010 11:56 AM

Hey Jeff. I am actually going to switch my order to the kit without the camera. Thanks man.

bdl99

11-11-2010 12:17 PM

Quote:

Originally Posted by PW370z (Post 805673)

Hey Jeff. I am actually going to switch my order to the kit without the camera. Thanks man.

Done (reflected in the list above).

Do you plan on using the Kenwood camera? If so I've created a supplemental instruction sheet on what I do to the camera (modification to bracket and soldering on power connector).

axeman71

11-11-2010 02:00 PM

bdl99, I went reading back through this thread but I couldn't find a definite answer so I want to clarify: The kit (without camera) includes an RCA plug for me to connect the RCA cable from my existing camera, right?

PW370z

11-11-2010 02:08 PM

Quote:

Originally Posted by bdl99 (Post 805694)

Yes, I do plan on using the Kenwood CMOS-200 camera. I would appreciate the supplemental instruction sheet on what you do to the camera (modification to bracket and soldering on power connector). Thanks!

bdl99

11-11-2010 03:07 PM

Quote:

Originally Posted by axeman71 (Post 805808)

Correct.

Osiris

11-11-2010 07:39 PM

Quote:

Originally Posted by PW370z (Post 805818)

um, does this kit require soldering?

All times are GMT -5. The time now is 06:27 AM.

Page 5 of 13

« First

Last »

Show 40 post(s) from this thread on one page