Nissan 370Z Forum  

Get the Axxess ASWC working - All buttons

PAC SWI RC and the AXXESS ASWC-1 on a 2014 370Z base (non-Bose, non-nav.) with a Kenwood KDC-BT958HD. VOLUME WORKS BUT NOTHING ELSE- Try swapping the two steering wheel signal

Go Back   Nissan 370Z Forum > Nissan 370Z Tech Area > Audio & Video


Like Tree17Likes

 
 
LinkBack Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 10-25-2014, 09:24 AM   #11 (permalink)
Base Member
 
Join Date: Jul 2014
Location: Washington, DC
Posts: 4
Drives: 2014 370Z Base MT
Rep Power: 11
JMow is on a distinguished road
Default

PAC SWI RC and the AXXESS ASWC-1 on a 2014 370Z base (non-Bose, non-nav.) with a Kenwood KDC-BT958HD.

VOLUME WORKS BUT NOTHING ELSE- Try swapping the two steering wheel signal wires.
AXXESS- has two sets of instructions for the Z, with one having only the two steering wheel signal wires opposite of the other, I decided I’d try it both ways. But don’t be fooled if only volume works! That doesn’t mean you have the wires right. Once I swapped the wires, everything auto-programmed flawlessly- done!

PAC - I did get the volume working, but did not try swapping steering wheel signal wires. Based on my experience with the AXXESS, you could give it a try on the PAC.
Obviously this assumes the other wiring is right- power and ground to the unit, and pin 15 on the Z needs to be grounded.


WHY I LIKE AXXESS ASWC-1 BETTER THAN PAC SWI RC

Axxess worked. I gave up on the PAC after a good try and since I found the PAC SWI RC is not compatible some Kenwoods with similar model #s as mine (See PAC website). Perhaps I just needed to swap signal wires, but there were other compelling reasons to go with Axxess as well.

Axxess has simpler wiring- The PAC-SWI RC features a bag of resistors and capacitors to solder in-line. Who wants to deal with that?? Admittedly Axxess comes with 1 resistor needed for programming certain Kenwood models (I didn’t need it with my Kenwood)

Axxess has non-volatile memory- meaning that in a few years when you change your car battery you will not have to also dig behind you dashboard to find the unit and program it.

Axxess has an auto-programming feature- this worked great once I had the wiring correct. Saves time. The programming with the PAC actually takes a little practice to get the sequences and timing correct for pushing all the buttons.

COMPARING SPEED- tie. I’ve seen posts on one vs. the other in speed. I had volume working on the PAC. I didn’t time it, but both seemed to increase or decrease volume at the same rate. Non-noticable / negligible difference.
JMow is offline   Reply With Quote
 

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Axxess ASWC wiring. Z33knight Audio & Video 16 12-19-2019 11:54 AM
axxess module. jayl Mid-Atlantic Region 6 07-30-2012 10:23 AM
Anyone get the Axxess ASWC to work properly? DeEePiDDy Audio & Video 8 08-23-2010 08:09 PM
Kenwood DDX812 + 370Z kit, ASWC, iPod cable. Z33knight Parts for sale (Private Classifieds) 11 08-15-2010 01:54 PM
metra axxess aswc not working jayl Audio & Video 8 06-26-2010 11:50 PM


All times are GMT -5. The time now is 10:45 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 PL2