Tesla styled screen setup

asorg31 · 01-03-2016, 12:47 PM

Quote:

Originally Posted by Parello9

This is amazing i hope you can put these into a UK car

I know the push button start would be the wrong way round though

This is something I have been thinking about. Once I have a fully working version here stateside I would like to do the work for a fully mirrored version for right hand drive vehicles.

Array · 01-03-2016, 04:37 PM

I'm glad this has turned out how it is so far, Keep it up!

MagmaRed370z · 01-03-2016, 05:24 PM

Quote:

Originally Posted by asorg31

This is something I have been thinking about. Once I have a fully working version here stateside I would like to do the work for a fully mirrored version for right hand drive vehicles.

asorg31

Any more updates? Keep up the good work!

asorg31 · 01-03-2016, 05:44 PM

Quote:

Originally Posted by schellingr

asorg31

Any more updates? Keep up the good work!

I have received some of the computer parts as this weekend and I should be receiving the 3d print on Jan 12th! I'm very excited!

GaleForce · 01-03-2016, 08:24 PM

asorg31 · 01-06-2016, 06:32 PM

We got our package in today! It came in a week and a half early!! So of course we had to take the dash apart and do a quick fitment. There are a few minor fixes that we will have to do. But as you can see it fits great including the vents and the starter button!!

Here are a couple of pics with the dash and monitor.

asorg31 · 01-06-2016, 06:34 PM

And we can't leave you hanging without showing you what it looked like in the dash.

And finally the last pic for tonight was taken with the fitting of the vents and start button. Like a glove!

Parello9 · 01-06-2016, 06:56 PM

bravo sir!

GaleForce · 01-06-2016, 08:11 PM

Nicely done!

Is there anyway to reduce/lower the top section or is that needed to cover the screen bezel?

I like the progress. Keep it up!

370Z JT · 01-06-2016, 08:23 PM

If the top part gale is talking about can be rounded a bit.

Sent from my Nexus 6 using Tapatalk

Venom13132 · 01-07-2016, 05:48 AM

very cool to see this coming together.

asorg31 · 01-07-2016, 06:24 AM

Quote:

Originally Posted by GaleForce

Nicely done!

Is there anyway to reduce/lower the top section or is that needed to cover the screen bezel?

I like the progress. Keep it up!

Quote:

Originally Posted by 370Z JT

If the top part gale is talking about can be rounded a bit.

Sent from my Nexus 6 using Tapatalk

It can be slightly more rounded but like you said GaleForce a lot of the sharpness has to do with the clearance needed for the screen bezel. I am going to try a few tricks to see what I can gain now that a have something physical to mess around with to make sure I get it just right.

asorg31 · 01-07-2016, 06:28 AM

Thanks for the support everyone, it has been great to have you all backing me in this project of mine. And the feedback has been very helpful! The Z family is definitely the best car community out there!

MagmaRed370z · 01-07-2016, 07:28 AM

asorg31.

This is really awesome! Thanks for posting the updates. This is going to be really awesome!

birdman71 · 01-07-2016, 02:30 PM

You could make your own business with this haha. Have the Console trims made and sell them and you could sell the indash screen with or without it for the extra cost.

I'd friggin buy it lol!

01-03-2016, 04:37 PM	#287 (permalink)
Array Enthusiast Member Join Date: Jun 2014 Location: home.jpg Posts: 286 Drives: '12 Pearly White Rep Power: 10	I'm glad this has turned out how it is so far, Keep it up! __________________ 2012 370z 7AT- ES2 with PSS, K&N Drop-ins, LED's all around, Berk HFC, FI CBE non-res, KW V1's 2003 A4 5MT- The Beater

01-03-2016, 08:24 PM	#290 (permalink)
GaleForce A True Z Fanatic Join Date: Aug 2011 Location: Ontario, Canada Posts: 21,749 Drives: Varis Arising II Rep Power: 51864	scope22 and asorg31 like this. __________________ >>>GaleForce's Build<<< >>>FaceBook @3GsCustoms<<<>>>Instagram @GaleForce370z<<< Varis Kamikaze-Z

01-06-2016, 06:32 PM	#291 (permalink)
asorg31 Enthusiast Member Join Date: May 2015 Location: Annapolis, MD Posts: 277 Drives: 2011 Nissan 370Z Rep Power: 9	We got our package in today! It came in a week and a half early!! So of course we had to take the dash apart and do a quick fitment. There are a few minor fixes that we will have to do. But as you can see it fits great including the vents and the starter button!! Here are a couple of pics with the dash and monitor. Infiniti370z and Venom13132 like this. __________________ ANTHONYSORG

01-06-2016, 06:34 PM	#292 (permalink)
asorg31 Enthusiast Member Join Date: May 2015 Location: Annapolis, MD Posts: 277 Drives: 2011 Nissan 370Z Rep Power: 9	And we can't leave you hanging without showing you what it looked like in the dash. And finally the last pic for tonight was taken with the fitting of the vents and start button. Like a glove! 370Z JT, LMBmikeZ, Infiniti370z and 6 others like this. __________________ ANTHONYSORG

01-06-2016, 06:56 PM	#293 (permalink)
Parello9 Base Member Join Date: Nov 2014 Location: UK Posts: 27 Drives: Bagged 370z Rep Power: 10	bravo sir! asorg31 likes this.

01-06-2016, 08:11 PM	#294 (permalink)
GaleForce A True Z Fanatic Join Date: Aug 2011 Location: Ontario, Canada Posts: 21,749 Drives: Varis Arising II Rep Power: 51864	Nicely done! Is there anyway to reduce/lower the top section or is that needed to cover the screen bezel? I like the progress. Keep it up! asorg31 likes this. __________________ >>>GaleForce's Build<<< >>>FaceBook @3GsCustoms<<<>>>Instagram @GaleForce370z<<< Varis Kamikaze-Z

01-06-2016, 08:23 PM	#295 (permalink)
370Z JT A True Z Fanatic Join Date: Jan 2010 Location: United States Posts: 2,905 Drives: 370Z PW 7AT Rep Power: 378	If the top part gale is talking about can be rounded a bit. Sent from my Nexus 6 using Tapatalk asorg31 likes this. __________________ Click for My Journal Top Secret \| EVO-R \| Fujimura Auto \| Shine Auto \| Seibon \| MRWorks \| Swift \| SPC \| SSR \| UpRev \| Project Kics \| NST \| Titek \| Eibach \| Nismo \| Whiteline \| Quaife \| Invidia \| Fly1 \| CF Element \| Carbon Signal

01-07-2016, 05:48 AM	#296 (permalink)
Venom13132 Base Member Join Date: Jul 2014 Location: indianapolis Posts: 232 Drives: 10Z Tour Sport Nav Rep Power: 10	very cool to see this coming together. asorg31 likes this.

01-07-2016, 06:28 AM	#298 (permalink)
asorg31 Enthusiast Member Join Date: May 2015 Location: Annapolis, MD Posts: 277 Drives: 2011 Nissan 370Z Rep Power: 9	Thanks for the support everyone, it has been great to have you all backing me in this project of mine. And the feedback has been very helpful! The Z family is definitely the best car community out there! Infiniti370z, GaleForce and CanadianSteel like this. __________________ ANTHONYSORG

01-07-2016, 07:28 AM	#299 (permalink)
MagmaRed370z A True Z Fanatic Join Date: Jun 2014 Location: USA Posts: 1,468 Drives: 14' 370z Sport Magma Rep Power: 12	asorg31. This is really awesome! Thanks for posting the updates. This is going to be really awesome! asorg31 likes this. __________________ Sold: 2014 Magnetic Black Base. Current: 2014 Magma Red 370z Sport \| ARK Grip Exhaust \| 25mm HR Spacers \| GTR Button \| DRL Mod

01-07-2016, 02:30 PM	#300 (permalink)
birdman71 A True Z Fanatic Join Date: Apr 2015 Location: Los Angeles, CA Posts: 1,579 Drives: People Crazy! Rep Power: 40	You could make your own business with this haha. Have the Console trims made and sell them and you could sell the indash screen with or without it for the extra cost. I'd friggin buy it lol! __________________ *Birdman's Build:* Powerhouse Amuse/ Nismo/ Eibach/ ACT/ Tommy Kaira/ Avant Garde/ Fast Intentions/ Project Kics/ Fly 1 Motorsports/ EVO-R/ Z1 Motorsports/ Weber Sports/ Zoom/ Zele Japan

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Tesla D owns a Hellcat in the 1/4 mile...	DCNISMO	Other Vehicles	12	01-22-2015 01:37 AM
The new 691 HP Tesla D	watson853	Other Vehicles	3	10-10-2014 10:26 AM
Tesla gets armor plating....	DCNISMO	Other Vehicles	1	03-28-2014 10:55 AM
Tesla sedan!! Discuss	shabarivas	Other Vehicles	5	01-23-2010 10:49 AM