Tesla styled screen setup

asorg31 · 10-28-2015, 08:33 AM

I sat down last night with my UI Designer to get the first walk through of the phone portion of the interface. This is displayed directly on the screen that will be used for this project. I don't know about you all but I am very happy with the wire-frames. Keep in mind this is not how it will look once it is finished, the idea is to keep it basic and make it function. Once it can function then we get to play with how it will look!

birdman71 · 10-28-2015, 02:17 PM

I'd be down to beta test the system

Car is a daily driver though so It would have to be somewhere close to me so I can get back home and to work easily without a car

How long would installation on something like this be Anthony?

asorg31 · 10-28-2015, 04:49 PM

Quote:

Originally Posted by birdman71

I'd be down to beta test the system

Car is a daily driver though so It would have to be somewhere close to me so I can get back home and to work easily without a car

How long would installation on something like this be Anthony?

I am looking into building wiring harnesses that will allow for it to be directly plugged into the factory plugs. with that being said I would estimate 2 hours of install time and another couple of hours to fully configure the system. It would be a good estimate to assume half a day at a local stereo shop or local expert.

Eetabeetay · 11-03-2015, 11:29 AM

Android auto/Apple CarPlay?

asorg31 · 11-03-2015, 02:11 PM

Quote:

Originally Posted by Eetabeetay

Android auto/Apple CarPlay?

I am looking into it now. Over the next couple of weeks I will be discussing with a few developers to do the coding for the interface. I will make sure that this is something that is brought up in those discussions.

If it is possible what is everyone more interested in?

Array · 11-06-2015, 01:01 PM

Quote:

Originally Posted by asorg31

I am looking into it now. Over the next couple of weeks I will be discussing with a few developers to do the coding for the interface. I will make sure that this is something that is brought up in those discussions.

If it is possible what is everyone more interested in?

Why not both?

bigaudiofanat · 11-10-2015, 09:25 AM

Quote:

Originally Posted by Array

Why not both?

asorg31 · 11-11-2015, 06:37 AM

Quote:

Originally Posted by bigaudiofanat

Hahahaha that is just awesome!

GaleForce · 11-03-2015, 07:49 PM

+1 for Apple Car play.

The Dimer · 11-04-2015, 08:07 AM

+1 for Android Auto, but it's obviously it's going to depend on what phone everyone is using.

yushinrt · 11-10-2015, 09:20 AM

so looking forword to this project

MagmaRed370z · 11-19-2015, 12:59 PM

Did you make it to the 3D Printer Prototype yet? Sorry but this is awesome!!!!!!!!

asorg31 · 11-19-2015, 01:32 PM

Quote:

Originally Posted by schellingr

Did you make it to the 3D Printer Prototype yet? Sorry but this is awesome!!!!!!!!

I had to take a step back and do some rethinking on it. I got a couple of quotes from different companies that can print in large scale. The prices ranged from $800 to nearly $2000. So I am trying to cut out excess material that isn't structurally needed now to lower my overall cost. That was way more than I wanted to pay for a prototype print.

Venom13132 · 11-19-2015, 01:57 PM

Quote:

Originally Posted by asorg31

I had to take a step back and do some rethinking on it. I got a couple of quotes from different companies that can print in large scale. The prices ranged from $800 to nearly $2000. So I am trying to cut out excess material that isn't structurally needed now to lower my overall cost. That was way more than I wanted to pay for a prototype print.

could you make it sort of a skeleton? Just have a frame with all the moutning points. Worst case you could fiber glass that in after.

also for those numbers I would buy my own printer!

asorg31 · 11-19-2015, 02:07 PM

Quote:

Originally Posted by Venom13132

could you make it sort of a skeleton? Just have a frame with all the moutning points. Worst case you could fiber glass that in after.

also for those numbers I would buy my own printer!

The skeleton is something I am looking into as well as reducing the total volume of the dash (thinning out the walls). I wish i could buy a 3d printer in that range. There are a lot of printers you can pick up for that price but to print somethint 14" x 14" x 5" in on go would be more in the range of $5,000+

10-28-2015, 08:33 AM	#1 (permalink)
asorg31 Enthusiast Member Join Date: May 2015 Location: Annapolis, MD Posts: 277 Drives: 2011 Nissan 370Z Rep Power: 12	I sat down last night with my UI Designer to get the first walk through of the phone portion of the interface. This is displayed directly on the screen that will be used for this project. I don't know about you all but I am very happy with the wire-frames. Keep in mind this is not how it will look once it is finished, the idea is to keep it basic and make it function. Once it can function then we get to play with how it will look! __________________ ANTHONYSORG

10-28-2015, 02:17 PM	#2 (permalink)
birdman71 A True Z Fanatic Join Date: Apr 2015 Location: Los Angeles, CA Posts: 1,579 Drives: People Crazy! Rep Power: 42	I'd be down to beta test the system Car is a daily driver though so It would have to be somewhere close to me so I can get back home and to work easily without a car How long would installation on something like this be Anthony? __________________ *Birdman's Build:* Powerhouse Amuse/ Nismo/ Eibach/ ACT/ Tommy Kaira/ Avant Garde/ Fast Intentions/ Project Kics/ Fly 1 Motorsports/ EVO-R/ Z1 Motorsports/ Weber Sports/ Zoom/ Zele Japan

11-03-2015, 07:49 PM	#9 (permalink)
GaleForce A True Z Fanatic Join Date: Aug 2011 Location: Ontario, Canada Posts: 21,749 Drives: Varis Arising II Rep Power: 51866	+1 for Apple Car play. __________________ >>>GaleForce's Build<<< >>>FaceBook @3GsCustoms<<<>>>Instagram @GaleForce370z<<< Varis Kamikaze-Z

11-04-2015, 08:07 AM	#10 (permalink)
The Dimer Track Member Join Date: Mar 2011 Location: Bolingbrook, IL Posts: 632 Drives: 2010 PW 370z Rep Power: 17	+1 for Android Auto, but it's obviously it's going to depend on what phone everyone is using. __________________ K&N Drop-Ins, Z1 Post-MAF Tubes, FI 18" CF TDX, TWM Short Throw Shifter w/ A6 Leopard Knob, 'esfourteen' clutch helper spring, 'kellyefields' hood struts.

11-19-2015, 12:59 PM	#12 (permalink)
MagmaRed370z A True Z Fanatic Join Date: Jun 2014 Location: USA Posts: 1,468 Drives: 14' 370z Sport Magma Rep Power: 14	Did you make it to the 3D Printer Prototype yet? Sorry but this is awesome!!!!!!!! __________________ Sold: 2014 Magnetic Black Base. Current: 2014 Magma Red 370z Sport \| ARK Grip Exhaust \| 25mm HR Spacers \| GTR Button \| DRL Mod

11-03-2015, 11:29 AM	#4 (permalink)
Eetabeetay Base Member Join Date: Oct 2015 Location: Nashville, Tennessee Posts: 3 Drives: 2014 370z Touring Rep Power: 11	Android auto/Apple CarPlay?

11-10-2015, 09:20 AM	#11 (permalink)
yushinrt Base Member Join Date: Sep 2015 Location: Japan Posts: 54 Drives: 13 nissan 370z nismo Rep Power: 84	so looking forword to this project

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Tesla D owns a Hellcat in the 1/4 mile...	DCNISMO	Other Vehicles	12	01-22-2015 01:37 AM
The new 691 HP Tesla D	watson853	Other Vehicles	3	10-10-2014 10:26 AM
Tesla gets armor plating....	DCNISMO	Other Vehicles	1	03-28-2014 10:55 AM
Tesla sedan!! Discuss	shabarivas	Other Vehicles	5	01-23-2010 10:49 AM