will these wheels fit on the rears. please advise.

Originally Posted by phunk

They definitely fit in the back, as I have them. You have to grind a couple MM off the top surfaces of the brake calipers to fit... without grinding they go on but they are scraping bad.

The wheels fit well, but I wish they were not quite as aggressive on the offset.

My car is lowered on H&R springs and aligned to -1.4 in the rear. The wheels and the 315 35 18 tires stick out of the fenders quite a bit. (say goodbye to the paint on your sideskirts lol, mine look sandblasted)

Fortunately the suspension cambers enough on compression to tuck inside the fenders on launch or bumps. I am unable to estimate how much closer to 0 camber I can go before they will strike. When I begin to prepare the car for the track, I will use a ratchet strap on the rack to pull the rear end down and see exactly how much more I can go.

I was going to attempt a 335/345 tire. I can see that with this aggressive of an offset, that is not going to happen, no way. It may work on cars that run more negative camber, there is quite a bit of space on the inside. But at my camber or closer to zero, a 335/345 on a 12" +20 wheel aint happening.

Originally Posted by F.I. Inc.

Yes, they are Tony approved! Frank, when I get around to it, I may put your pipes into production. We will call them, "The FP" option.
-Tony