Varrstoen 2.2.2 (track 200) et questions.. Too aggressive?

Maxi · 04-11-2012, 10:39 AM

Damn.. I really hope that someone can help me with this.

I purchased a new set of Varrstoens 2.2.2 for my 370Z (18" fronts 9,5" et12 and rears 10,5" et22)

I was just test fitting these to my car and it looks like front ET is too wide? Or too aggressive.. Or am i just hallucinating when comparing to standard 18" wheels..?

When the car was raised up it looks like wheel comes out something like 3-5 centimeters? I couldn't get it lowered for test because i don't have tires at them right now..

BTW wheels clears my bigbrakes great. (gap was about 1cm)

Shot at 2012-04-11

Shot at 2012-04-11

Thanks!

370guy · 04-11-2012, 10:42 AM

Someone correct me if I'm wrong, but don't people usually do +22 in the front and +12 In the rear? It sounds like you got your offsets mixed up

GetYourWheels · 04-11-2012, 11:25 AM

Quote:

Originally Posted by 370guy

Someone correct me if I'm wrong, but don't people usually do +22 in the front and +12 In the rear? It sounds like you got your offsets mixed up

You are correct.

It will fit with some camber though.

Maxi · 04-11-2012, 11:35 AM

Quote:

Originally Posted by GetYourWheels

You are correct.

It will fit with some camber though.

Damn.. that's what they are selling..

varrstoen - products

Select Nissan and 370Z (brembo) and application gives these:

Perfect fit
Front:18x9.5J et12
Rear: 18x10.5J et22

I think that et12 in front does have something to do with brake caliper clearance?

Anybody with et12 in front?

I was planning to put Michelin PS2 265/40 in front and 295/35 rear.

TerribleONE · 04-11-2012, 11:37 AM

it should fit with some camber.. but yea most people go with +22 front and +12 rear for those widths

corbin09 · 04-11-2012, 11:46 AM

I thought the +22s didnt clear the brake caliper? It will fit just use a little bit less tire (235/245 range) and a little negative camber. It wont stick out as far when you car is lowered on the ground and your suspension is under load.

fairladyZ34 · 04-11-2012, 11:54 AM

The 9.5" +12's clear but the +22's won't clear the akebonos.

Maxi · 04-11-2012, 11:58 AM

Quote:

Originally Posted by corbin09

I thought the +22s didnt clear the brake caliper? It will fit just use a little bit less tire (235/245 range) and a little negative camber. It wont stick out as far when you car is lowered on the ground and your suspension is under load.

Okay.. i already ordered tires last week so it won't be easy to cancel or change these to another size.

Well - i must think what to do next.

Car is not lowered.. yet. Planning to do it sometime.

Juruki · 04-11-2012, 12:03 PM

it will look pretty bad without lowering and with 265's on the fronts. Even lowered and with 265's you might rub

any way you could return the wheels?

vividracing · 04-11-2012, 12:03 PM

You can make it fit with some camber. I can't believe they list that fitment as "perfect fit."

You'll definitely need to roll the fenders as well. And run a 255 tire.

Juruki · 04-11-2012, 12:42 PM

so to make those wheels fit you will need to drop the car, roll the fenders and get skinnier tires. Also, the rear wheels will be sunken while the fronts will be sticking out so you will need a rear spacer to even out the fitment.
Varrstoen sells those claiming they fit 370's?

GetYourWheels · 04-11-2012, 01:45 PM

They should work with a 255 and some camber

kenchan · 04-11-2012, 02:30 PM

i would return it. ET12 with 9.5 would barely even fit my G...let alone bearing failure and tramlining.

corbin09 · 04-11-2012, 03:44 PM

Why do you say you would get bearing failure running a +12? I have been running semi aggressive offsets for 3 years now and havent had any issues. Our Zs have fenders that accommodate WAY bigger wheels then the g35 coupe.

twinturbonet · 04-11-2012, 04:07 PM

Wow, this really bothers me. I was looking at the same style wheel, but the 19's. I see those are 19x9.5 et22 and 19x10.5 et22.

Dumb question, but are you sure they sent you the right wheels?

04-11-2012, 10:39 AM	#1 (permalink)
Maxi Base Member Join Date: Oct 2011 Location: Finland Posts: 19 Drives: 2011 370Z Pack Rep Power: 13	Varrstoen 2.2.2 (track 200) et questions.. Too aggressive? Damn.. I really hope that someone can help me with this. I purchased a new set of Varrstoens 2.2.2 for my 370Z (18" fronts 9,5" et12 and rears 10,5" et22) I was just test fitting these to my car and it looks like front ET is too wide? Or too aggressive.. Or am i just hallucinating when comparing to standard 18" wheels..? When the car was raised up it looks like wheel comes out something like 3-5 centimeters? I couldn't get it lowered for test because i don't have tires at them right now.. BTW wheels clears my bigbrakes great. (gap was about 1cm) Shot at 2012-04-11 Shot at 2012-04-11 Thanks!

04-11-2012, 10:42 AM	#2 (permalink)
370guy Enthusiast Member Join Date: Sep 2011 Location: knoxvile, TN Posts: 298 Drives: 370+Viper+Vette=Fast Rep Power: 13	Someone correct me if I'm wrong, but don't people usually do +22 in the front and +12 In the rear? It sounds like you got your offsets mixed up __________________ - TopSpeed - Z1 - AMS - K&N - Password:JDM - Nismo - Evo-R - Megan Racing - Last edited by 370guy; 04-11-2012 at 11:10 AM.

04-11-2012, 11:37 AM	#5 (permalink)
TerribleONE A True Z Fanatic Join Date: Jan 2009 Location: Socal Posts: 10,203 Drives: WOT Rep Power: 5850	it should fit with some camber.. but yea most people go with +22 front and +12 rear for those widths __________________ 638WHP 541WTQ @ 13.5PSI Build thread

04-11-2012, 11:54 AM	#7 (permalink)
fairladyZ34 A True Z Fanatic Join Date: Aug 2009 Location: Central NJ Posts: 1,577 Drives: 08 G37S Black M6 Rep Power: 18	The 9.5" +12's clear but the +22's won't clear the akebonos. __________________ From Z to G to BMW and back to a G! Nismo for life

04-11-2012, 12:03 PM	#9 (permalink)
Juruki Track Member Join Date: Mar 2010 Location: SoCal Posts: 965 Drives: 370Z Tour/Sport/Navi Rep Power: 16	it will look pretty bad without lowering and with 265's on the fronts. Even lowered and with 265's you might rub any way you could return the wheels? __________________ 09 370z - 7AT Volk Racing TE37SL / BC Coilovers / Berk HFC / TopSpeed CBE + Y-Pipe / Mines Spoiler

04-11-2012, 11:46 AM	#6 (permalink)
corbin09 Track Member Join Date: Jun 2009 Location: Dallas tx Posts: 665 Drives: 370z Rep Power: 279	I thought the +22s didnt clear the brake caliper? It will fit just use a little bit less tire (235/245 range) and a little negative camber. It wont stick out as far when you car is lowered on the ground and your suspension is under load.

04-11-2012, 12:03 PM	#10 (permalink)
vividracing The370Z.com Sponsor Join Date: Jun 2009 Location: Gilbert, AZ Age: 37 Posts: 7,306 Drives: 350Z,370Z,GTR Rep Power: 38	You can make it fit with some camber. I can't believe they list that fitment as "perfect fit." You'll definitely need to roll the fenders as well. And run a 255 tire. __________________ Rocky @ Vivid ♦ 480.966.3040 x236 ♦ Rocky@vividracing.com Email, PM, or call me directly for aggressive The370Z.com member pricing!!!

04-11-2012, 12:42 PM	#11 (permalink)
Juruki Track Member Join Date: Mar 2010 Location: SoCal Posts: 965 Drives: 370Z Tour/Sport/Navi Rep Power: 16	so to make those wheels fit you will need to drop the car, roll the fenders and get skinnier tires. Also, the rear wheels will be sunken while the fronts will be sticking out so you will need a rear spacer to even out the fitment. Varrstoen sells those claiming they fit 370's? __________________ 09 370z - 7AT Volk Racing TE37SL / BC Coilovers / Berk HFC / TopSpeed CBE + Y-Pipe / Mines Spoiler Last edited by Juruki; 04-11-2012 at 12:49 PM.

04-11-2012, 01:45 PM	#12 (permalink)
GetYourWheels A True Z Fanatic Join Date: Feb 2011 Location: Southern California Posts: 3,816 Drives: 2011 BMW M3 Rep Power: 21	They should work with a 255 and some camber __________________ Email : Eddie@GetYourWheels.com \| Tel: (562)249-7184 \| Your Wheel Fitment Specialist / Wheel & Tire Deal via DM Top Tiers Dealers - Avant-Garde / Forgestar / Rohana / Stance / Vossen + More https://live.staticflickr.com/65535/...de6886f7a7.jpg

04-11-2012, 02:30 PM	#13 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141520	i would return it. ET12 with 9.5 would barely even fit my G...let alone bearing failure and tramlining.

04-11-2012, 03:44 PM	#14 (permalink)
corbin09 Track Member Join Date: Jun 2009 Location: Dallas tx Posts: 665 Drives: 370z Rep Power: 279	Why do you say you would get bearing failure running a +12? I have been running semi aggressive offsets for 3 years now and havent had any issues. Our Zs have fenders that accommodate WAY bigger wheels then the g35 coupe.

04-11-2012, 04:07 PM	#15 (permalink)
twinturbonet Enthusiast Member Join Date: Mar 2012 Location: Miami, FL Age: 41 Posts: 335 Drives: 11' Z #024 - SFZCC Rep Power: 13	Wow, this really bothers me. I was looking at the same style wheel, but the 19's. I see those are 19x9.5 et22 and 19x10.5 et22. Dumb question, but are you sure they sent you the right wheels? __________________

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Rohana RC-5 Deep Concave with Lip Agressive Offsets	GetYourWheels	Tires/Wheels	23	07-29-2012 02:48 AM
Check out my Agressive wheels and stretched tires setup	nugenzboss	Wheels & Tires	55	05-10-2011 10:39 AM
Are other drivers more agressive around you when you drive your Z ?	dirtrat	Nissan 370Z General Discussions	68	04-12-2011 01:49 PM
Race Track Questions	oleg	Track / Autocross / Drifting / Dragstrip	29	04-06-2011 10:18 PM
FS: Brand new in-box SSR SP3 19" Matte Black/Polished - Agressive Fitment	M.Bonanni	Parts for sale (Private Classifieds)	73	10-10-2010 12:35 PM