Wheels under $2.5k that are not heavy

Xsad · 04-02-2012, 06:03 PM

RPF1 is the lightest in the market.
Volk TE 37 just a bit heavier but expensive.

ChipsWithDips · 04-02-2012, 06:11 PM

Quote:

Originally Posted by Xsad

RPF1 is the lightest in the market.
Volk TE 37 just a bit heavier but expensive.

I think PF01 is supposed to be the updated, maybe slightly lighter replacement for RPF1. They look better anyways. I'm thinking of going with those when the time comes.

gofaster87 · 04-02-2012, 06:12 PM

Quote:

Originally Posted by TerribleONE

way to go!!! Even though they are nismo wheels.. theyre still stock and boring IMO...

They may be stock but they're damn good rims and much better looking than most of the aftermarket I see on here. Ive owned Volks, Gram lights, Enkei and a few others and my Nismo stockers are right up there with them. Id rather put the money towards the engine.

shadoquad · 04-02-2012, 06:18 PM

I like the Forgestar F14's. You should easily be able to get a set for under 2k (without tires). They're fairly light, but I don't know exact weights.

babbagandu · 04-02-2012, 07:51 PM

Quote:

Originally Posted by Xsad

RPF1 is the lightest in the market.
Volk TE 37 just a bit heavier but expensive.

i am not really a fan of the RPF1 styling. However I do love the RP03 and I had forgotten all about them until you reminded me of Enkei. The only thing is that the widest size they come in is 10 inches.

Would I even be able to notice the smaller width if my tires are just as wide as the stock ones though?

Quote:

Originally Posted by shadoquad

I like the Forgestar F14's. You should easily be able to get a set for under 2k (without tires). They're fairly light, but I don't know exact weights.

I love the F14's and was gonna buy a set until I realized they are about 25 or 26 pounds

Mike · 04-02-2012, 08:04 PM

If you can go 1/2" narrower with the sport wheel specs, the Nismo S-tunes are on sale everywhere right now in the 800-1000 range.

shadoquad · 04-02-2012, 09:29 PM

Quote:

Originally Posted by babbagandu

I love the F14's and was gonna buy a set until I realized they are about 25 or 26 pounds

ah ok

babbagandu · 04-02-2012, 10:30 PM

What do you all think of these? I really like them but just realized the black color comes only in 19x10 and 19x8.5.... So if I got them I guess I would have to just get 19x10 all around and just have a staggered tire setup? Idk. I think I would also need some spacers for these as the offset is +22

These are RP03's btw

babbagandu · 04-03-2012, 08:06 AM

Bump for input about my previous post. I'm gonna order these today if you all approve!

Omikron · 04-03-2012, 08:52 AM

What was the cost on those when you priced them? Weight for the 10" per? Thanks.

b1adesofcha0s · 04-03-2012, 09:18 AM

Quote:

Originally Posted by Omikron

What was the cost on those when you priced them? Weight for the 10" per? Thanks.

+1

babbagandu · 04-03-2012, 09:20 AM

Quote:

Originally Posted by Omikron

What was the cost on those when you priced them? Weight for the 10" per? Thanks.

The cost I have seen on a couple sites and also on eBay is 1500-1600 for a set of 4. I dont know the "official" weight numbers but I have seen posts on a.couple different forums saying 23lb for the 10" width which sounds reasonable IMO

babbagandu · 04-03-2012, 09:34 AM

Still debating whether to get 10" width for all 4 or 8.5" in the front. The offsets for both are +22. Can anyone tell me if I would need spacers to be close to flush?

daisuke149 · 04-03-2012, 09:38 AM

go 10" all around. the 8.5 is too skinny yo.

babbagandu · 04-03-2012, 10:22 AM

Quote:

Originally Posted by daisuke149

go 10" all around. the 8.5 is too skinny yo.

Ok, I will go with 10's all around then.

Can anybody help me with the fitment though? Again, the offsets are +22. Idk how these will fit in the front and rear. Will I need spacers?

04-02-2012, 08:04 PM	#21 (permalink)
Mike The370Z.com Sponsor Join Date: Jun 2009 Location: Loganville, GA Posts: 5,944 Drives: 370z Rep Power: 2185	If you can go 1/2" narrower with the sport wheel specs, the Nismo S-tunes are on sale everywhere right now in the 800-1000 range. __________________ NISSAN: 75 280Z / 86 300ZX GLL /87 Sentra SE / 03 350Z / 23 Z Porsche: 93 968 / 23 Macan GTS / 93 968

04-02-2012, 10:30 PM	#23 (permalink)
babbagandu Enthusiast Member Join Date: Mar 2011 Location: US Posts: 349 Drives: 09 Nismo Rep Power: 14	What do you all think of these? I really like them but just realized the black color comes only in 19x10 and 19x8.5.... So if I got them I guess I would have to just get 19x10 all around and just have a staggered tire setup? Idk. I think I would also need some spacers for these as the offset is +22 These are RP03's btw Last edited by babbagandu; 04-02-2012 at 10:34 PM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
heavy vibration	ryan370zpower	Engine & Drivetrain	19	07-27-2015 11:04 AM
Why is our car so heavy?	wdkwang	Nissan 370Z General Discussions	73	11-22-2011 12:26 PM
7AT: Heavy Resistance going From P to R	370Z JT	Engine & Drivetrain	18	06-19-2011 11:04 AM
Finally got around to clean her. PIC HEAVY	whiddles	Other Vehicles	18	05-13-2010 10:02 AM
Out with the Old... PIC HEAVY	One_Quick_Z	Member's 370Z Gallery	31	09-06-2009 10:46 PM

04-02-2012, 06:03 PM	#16 (permalink)
Xsad Base Member Join Date: Dec 2010 Location: Fort Riley, KS Posts: 167 Drives: 2010 370z Turing 7sp Rep Power: 14	RPF1 is the lightest in the market. Volk TE 37 just a bit heavier but expensive.

04-02-2012, 06:18 PM	#19 (permalink)
shadoquad A True Z Fanatic Join Date: Apr 2010 Location: . Posts: 42,608 Drives: . Rep Power: 3886	I like the Forgestar F14's. You should easily be able to get a set for under 2k (without tires). They're fairly light, but I don't know exact weights.

04-03-2012, 08:06 AM	#24 (permalink)
babbagandu Enthusiast Member Join Date: Mar 2011 Location: US Posts: 349 Drives: 09 Nismo Rep Power: 14	Bump for input about my previous post. I'm gonna order these today if you all approve!

04-03-2012, 09:34 AM	#28 (permalink)
babbagandu Enthusiast Member Join Date: Mar 2011 Location: US Posts: 349 Drives: 09 Nismo Rep Power: 14	Still debating whether to get 10" width for all 4 or 8.5" in the front. The offsets for both are +22. Can anyone tell me if I would need spacers to be close to flush?

04-03-2012, 09:38 AM	#29 (permalink)
daisuke149 My *** is famous! Join Date: Mar 2010 Location: Alpharetta, GA Posts: 4,849 Drives: 2013 Boss 302 PW Rep Power: 31	go 10" all around. the 8.5 is too skinny yo.