[Official] 370z wheel fitment guide (pics/specs) only

Jhill · 08-28-2021, 12:06 AM

Quote:

Originally Posted by 666Z34

Longtime lurker.. took a gamble and stepped down a size

Rays Gramlights 57dr 18x10.5 F+22 R+12
BC racing coilovers
Nitto NT555 275/40

Sent from my iPhone using Tapatalk

I’m looking at very similar setup for a second set of wheels with NT01 for track use. I’d be doing the 18x10.5 + 22 gram lights 57dr all four corner with 10mm spacer in rear this way I can rotate the wheels between events and get more usage. Any chance of rubbing at all in hard track cornering? Really don’t want to find out the hard way they hit on the track and unsettle the car etc…

vq37818 · 10-23-2021, 09:58 PM

SSR GTX04
18x10.5+15 squared
275/40 Nexen SUR4G
15mm rear spacer
Camber -3.5 front / -2.5 rear

OptionZero · 10-24-2021, 05:54 PM

Holy picture size

Trips · 10-26-2021, 12:11 AM

Quote:

Originally Posted by OptionZero

Holy picture size

OMG!! I needed to view it from across the street

Fixed

Eldomi809 · 02-11-2022, 09:08 AM

Just picked up some 20x10.5 and 11.5 rear. What tire sizes and folks with 20s running?

OptionZero · 02-11-2022, 03:42 PM

Wrong thread

And

Insufficient info, specifically offset and suspension mods/height

babyzilla · 02-17-2022, 10:14 PM

2) Momo Anzio in gloss metallic silver
3) Front 19x9.5, offset +20; Rear 19x11, offset +19
4/5) OEM Yokohama Advan Sport tires
6) Swift Spec R springs, about 1in drop all around
7) None
8) None so far
9) The front, IMO, is perfect. The rear cambers in just a tad bit and it was tucked in about 1 inch from the body. No rubbing all around.
10) I added 1 inch adapters in the rear and now the wheels sit almost flush. It barely sticks out. Keep in mind the tires are slightly stretched. The negative camber is still there.
11) IMO it looks flush. The front is perfect, but the rears could use some adjustment. I like how the rear tires are ever so slightly stretched and I like how they are flush after the one inch adapters. I'm not too happy about the negative camber. I still need to get the car aligned. I was thinking about getting some koni yellows since they are adjustable (probably last option). If not, I need to trim the inner portion of the fender trim, dialing in the toe as much as possible during the alignment, think about getting lower profile tires, and possibly rolling the fenders - in that order. Not sure which direction I want to go yet. Overall I'm happy, but the rear needs to be fixed.
12) Unavailable

OptionZero · 06-10-2022, 06:11 PM

The Z can fit some aggressive specs, dont settle

SSR Professor SP4. Gloss gunmetal lip, matte gunmetal faces, red hardware
F: 20x10, +3, MD disc
R: 20x11, -1, SL disc

Falken Azenis FK510
F: 255/35/20 (ordered by mistake, you should hse 245/35/20)
R: 285/30/20

Aragosta Type-S coilover (14k/10k)
SPL arms, midlinks modified for a 4 inch Eibach rear spring
Stanceparts Air Cup

Fenders rolled, Nismo trim removed, front bumper tab shaved, front fenders pulled

Camber
F: -4.5
R: -4

should go without saying, this is a street/show config. Track duty needs full alignment change, height increase, diff wheel/tires, etc

DeepfreeZe · 06-20-2022, 07:07 AM

I don't really want to lower mine. I recently purchased my dream rims. Need some guidance on which tire sizes (and heights) I need to have as meaty tires as possible without rubbing.

Tire size recommendations? Flush or do I need spacers? I plan on getting them Ceramic Coated b4 installing. '13 Gunmetal Sport Touring with the big brakes

Savini SV-F1 Double Dark: Front 19x9.5(ET22) & Rear 19x11 (ET20) @stock height with no plans of coilovers or springs because Austin roads are hot garbage

OTW Z-Boy · 06-20-2022, 09:16 AM

Quote:

Originally Posted by DeepfreeZe

I don't really want to lower mine. I recently purchased my dream rims. Need some guidance on which tire sizes (and heights) I need to have as meaty tires as possible without rubbing.

Tire size recommendations? Flush or do I need spacers? I plan on getting them Ceramic Coated b4 installing. '13 Gunmetal Sport Touring with the big brakes

Savini SV-F1 Double Dark: Front 19x9.5(ET22) & Rear 19x11 (ET20) @stock height with no plans of coilovers or springs because Austin roads are hot garbage

265/35r19 front 305/30r19 rear. Done.

Sent from my iPhone using Tapatalk

k67p67 · 06-20-2022, 04:19 PM

Quote:

Originally Posted by OTW Z-Boy

265/35r19 front 305/30r19 rear. Done.

Those sizes certainly are not meaty.

OTW Z-Boy · 06-21-2022, 06:50 PM

Quote:

Originally Posted by k67p67

Those sizes certainly are not meaty.

Well op stated bad roads and won’t do suspension mod, what were you thinking?

Sent from my iPhone using Tapatalk

k67p67 · 06-21-2022, 07:20 PM

Meaty typically means 40/45/50 series rubber.

OptionZero · 07-12-2022, 08:09 PM

Closer fitment

Lots of fender clearance at the TOP but the damned bumper tab, even shaved was something to watch out for

Rears have clearance for days at -4 camber. That amount was appropriare only bc of the -1 offset and height

rspray2000 · 08-15-2022, 05:30 PM

Enkei RS05-RR
18x9.5 +22 (F) with 275/40/18 Nitto NT555 G2
18x11 +16 (R) with 315/35/18 Toyo TQ

Didn’t want to poke, but it appears it’s just sidewall bulge on the rears, so I’m cool with it. I daily here in northeast, and will take it off the road before temps affect the rears. Pretty pumped about the Japanese muscle car look.

10-24-2021, 05:54 PM	#318 (permalink)
OptionZero A True Z Fanatic Join Date: Apr 2011 Location: Sacramento Posts: 3,270 Drives: 15 370Z Nismo 6MT Rep Power: 214101	Holy picture size __________________ OptionZero Build Thread

02-11-2022, 03:42 PM	#321 (permalink)
OptionZero A True Z Fanatic Join Date: Apr 2011 Location: Sacramento Posts: 3,270 Drives: 15 370Z Nismo 6MT Rep Power: 214101	Wrong thread And Insufficient info, specifically offset and suspension mods/height __________________ OptionZero Build Thread

06-21-2022, 07:20 PM	#328 (permalink)
k67p67 Enthusiast Member Join Date: Oct 2016 Location: Rancho Cucamonga, CA Posts: 313 Drives: 2017 Nismo Tech 6MT Rep Power: 3937	Meaty typically means 40/45/50 series rubber. __________________ SOLD2017 370Z Nismo Tech 6MT PART OUT IN PROGRESS Work \| Motordyne \| Powertrix \| Swift \| Michelin \| Takeda \| Hotchkis \| RJM \| Voodoo13 \| SPL \| SPC \| Z1 Motorsports \| ZSpeed \| Morimoto \| Craft Square

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Nissan 370Z Official Specs Released from Nissan 11.15.08	AK370Z	Nissan 370Z General Discussions	32	02-20-2012 01:14 AM
Nissan 370Z Official Specs Released from Nissan 11.15.08	AK370Z	Nissan 370Z Photos / Spyshots / Video / Media Gallery	24	09-21-2011 11:10 AM
Are these the perfect wheel specs for a 370Z?	Juruki	Wheels & Tires	22	05-14-2010 11:18 AM
Official Formula 1 2010 Thread: Shanghai International Circuit guide	AK370Z	Track / Autocross / Drifting / Dragstrip	20	04-21-2010 09:18 PM
2009 Nissan 370Z Specs (Official Specifications) Released on 11.19.08	AK370Z	Nissan 370Z Owners Manual / Service Manuals	0	02-12-2009 10:15 PM

02-11-2022, 09:08 AM	#320 (permalink)
Eldomi809 Base Member Join Date: Dec 2017 Location: Boston Posts: 9 Drives: 10’ 370z Roadster Rep Power: 3363	Just picked up some 20x10.5 and 11.5 rear. What tire sizes and folks with 20s running?