[Official] 370z wheel fitment guide (pics/specs) only

carlitos_370z

Awesome thread!!! subscribed

carlitos_370z

Anyone here have pics of a car with Varrstoen ES 522 (BBS LM-R replicas)

I think im going to buy that wheels but want to see some pics first.

Thanks!!

Vnismo370z

He's running coils. Look at line 5 of your post quote thing....

__________________
starting over

Liquid_G

Work Gnosis HS203 Full Reverse lip. Machining Silver finish
Front: 20x9.5 +6 (+1 with 5mm spacer) Spacer because I went a little lower after I ordered the wheels and the lowering adding a little more camber.
Rear: 20x10.5 -12
Yokohama S-Drives 225/35 and 255/35. They run a little wider than other brands.
KW V3 Coils.
Umbrella Cup Kit (Front only)
Camber is i think close to -3 in rear. maybe a little less in front like -2.7
Rear fender tabs trimmed a bit. Front fender had the tabs turned up and bumper tab cut and metal tab glassed in to match the tab angle.

__________________

*Ghostshade*

anyone with Forgestar F14 size and specs? looking mostly for offset options w/ coils

Zbrah

^search for a member s/n Zlife.

Holy

Work VS XX. 19x10 + 0 (f) and 19x12 + 0. 235/35/19 (f) and 275/45/19 (r) Hankook V12. BC Racing Coils. Natural camber. No fender work, minimal rubbing. I'm doing a slight roll up front later this week.

Attached Images

	photo (10).JPG (359.1 KB, 667 views)
	picstitch (1).jpg (171.8 KB, 937 views)

CarbonFZ

how big of a stretch did you have with the hankooks?

__________________

Holy

There is at most half an inch of stretch. Hankook v12s run a little thick

__________________

a6walter1

Varrstoen ES 2.2.2
F: 19x9.5 +22 with 8mm spacer and Ichiba Extended Studs
R: 19x10.5 +12 no spacers
Stock Ride Height
Stock Camber
No Rubbing, No issues.

__________________

My Journal (2012 PW 7AT)

ZLife

What tire sizes are you running ?

__________________
#Zilajr

a6walter1

Stock Sport Tires, 245/40/19 and 275/35/19

__________________

My Journal (2012 PW 7AT)

Riptide67

ForgeStar F14 Burst Bronze

19x9.5 + 20 Semi Deep Concave
19x11 + 15 Super Deep Concave

Front Nexen N7000 245/40ZR19
Rear Toyo Proxes 4 Plus 275/35R19. Rear tires are running on a slight stretch.

BC Racing BR Series Coilovers
SPC Rear Camber Arms
Toe Bolts

Camber Settings: See Printout above

No fender modifications

Car was on Swifts and there was no rubbing. Passenger side rubs slightly on BC's take sharp left hand turns. Needs raised slightly to fix issue.

Another alignment will be done after passenger side rubbing is fixed. Currently waiting on SPC Front Camber Arms.

Car is extremely aggressive on the BC Coils with the F14's in this offset. I was damn near FLUSH on Swifts, but due to the new drop there is more negative camber. I will update after the alignment has been corrected.

I am in love with the way it looks. Slight rubbing issue is being addressed and I am extra careful with speed bumps now. Sideskirts and Fast Intentions exhaust barely clear and I have scraped the exhaust after initial install. It has only hit at the flange areas of the exhuast.

***Wheel weight is based on Forgestar's Data Testing***
Front wheel weight: 25.6
Rear wheel weight: 25.7
Front wheel/tire weight: 54.5
Rear wheel/tire weight: 58.6

__________________

2009 Nismo 370Z and 1975 Datsun 280Z 2+2 - PNW_INC - Legacy_Ohana
Follow me on Instagam @s3zero_z3four

Bananaz

Surprised there aren't a load of stock wheels with spacers..still unsure what size to get

__________________

Boomer370

1) A Picture or a link must be posted




2) Name of the Rim, (Brand, type, color)
Work Emotion CR Ultimate GT Silver finish.

3) Rim Size (Height X Width + Offset)
19x9.5 +15 (F) 19x10.5 +12 (R), 5mm spacer on back

4) Name of the tire
OEM Tire Brand: Bridgestone (RE050A)

5) Tire size (Width/Profile/Rim)
Tire Size: 245/40/19 (front), 275/35/19 (rear)

6) Spring/Coilover Set up
EIBACH PRO SPRING KIT


7) Camber settings
FRONT: Original Spec
REAR: -2.5 if I remember correctly, very close to original specs

8) Fenders
Unrolled

9) Comments before modifing the car to make the rims fit
The rear tire sits in a little compared to the fronts so I added a 5mm spacer

10) Comments after modifications done to the car
After spacers, no rubbing issues. It also helps that I'm not dropped too low with EIBACHS.

11) Additional comments
Looks great and sits flush with your fenders. Using OEM size tires provides a subtle stretch which IMO looks good. Use more aggressive tire sizes if that suits you better also, both styles look gerat.

12) wheel and/or tire wieght
A couple pounds heavier than stock.