10mm spacer for the rear

nismo 1234 · 12-22-2010, 07:34 PM

hey guys,

so i have a set of TE37 19x9.5 and 19x10.5 and +22 all around..
i need 10mm spacer in the rear to make it fit even better.. im not looking for bolt ons, im looking for new studs also.

but a local shop is telling me that they cant guarantte that H&R 10mm spacers will fit since H&R cant even be sure themselves.

they said ichiba will work, but they make horrible studs? im not sure if thats true, the claimed that the studs broke when they tried to install it last time.

they are saying that i should go with nismo studs and ichiba 10mm spacer. but its pricy.. 3 times the price if i only got ichiba spacer and studs

does anyone have the H&R 10mm spacer installed with new studs?? or anyone ahve ichiba stud and spacers??

thanks

Matthew · 12-22-2010, 08:08 PM

Why would they not ?? I looked it up the 10mm from H&R should fit the part # is HR2065662.

christian370z · 12-23-2010, 12:28 AM

A 10mm spacer in the rear should bring the offset out nicely. There is a debate about whether the bolt on style spacers such as the Ichiba V2s are safe to use as they essentially add weak points to the wheels because they have two sets of studs holding the wheel to the hub instead of studs built into the hub like the H&Rs.

I am trying to figure that out personally; I have seen reviews of people having the Ichibas fail by snapping studs while many have run them for years and have never had an issue.

nismo 1234 · 12-23-2010, 02:34 AM

Quote:

Originally Posted by Matthew

Why would they not ?? I looked it up the 10mm from H&R should fit the part # is HR2065662.

that part number is for a 350z, the local shop and H&R are both unsure if it can be used on a 370z
thanks for the part number tho! i googled the part number and found out that this site is selling H&R 10mm spacer for 370z with the same part number that you gave.
H&R Trak+ 10mm Wheel Spacer Kit 5x114.3 DRS - 370Z - performance parts

Quote:

Originally Posted by christian370z

A 10mm spacer in the rear should bring the offset out nicely. There is a debate about whether the bolt on style spacers such as the Ichiba V2s are safe to use as they essentially add weak points to the wheels because they have two sets of studs holding the wheel to the hub instead of studs built into the hub like the H&Rs.

I am trying to figure that out personally; I have seen reviews of people having the Ichibas fail by snapping studs while many have run them for years and have never had an issue.

i would rather go with H&R if they fit, but if they dont than i would go with nismo studs and ichibas 10mm spacer. i rather not take the risk of my studs breaking

chuckd05 · 12-23-2010, 03:18 AM

HRs should work just fine... get them

ClemsonWill · 12-23-2010, 09:39 AM

I agree. Get the H&Rs.

phelan · 12-23-2010, 12:27 PM

what the hell? i had the h&r 10mm dsr spacers on with my ce28s, +22 all around just like yours. they worked fine.

nismo 1234 · 12-23-2010, 08:23 PM

Quote:

Originally Posted by phelan

what the hell? i had the h&r 10mm dsr spacers on with my ce28s, +22 all around just like yours. they worked fine.

do you happen to have the part number still??

Josh@STILLEN · 12-23-2010, 09:47 PM

Quote:

Originally Posted by nismo 1234

that part number is for a 350z, the local shop and H&R are both unsure if it can be used on a 370z
thanks for the part number tho! i googled the part number and found out that this site is selling H&R 10mm spacer for 370z with the same part number that you gave.
H&R Trak+ 10mm Wheel Spacer Kit 5x114.3 DRS - 370Z - performance parts

i would rather go with H&R if they fit, but if they dont than i would go with nismo studs and ichibas 10mm spacer. i rather not take the risk of my studs breaking

H&R will fit fine.. we have them in stock if that helps.. we've sold TONS of these for the 370Z, in every combination.

DRS is the style with the longer studs included: STILLEN : H&R TRAK+ Wheel Spacers

HR2065662 is the part number you're looking for..

RCZ · 12-23-2010, 10:13 PM

Is it mandatory to install extended studs with 10mm spacers? I guess it would depend on the design of the wheel?

Josh@STILLEN · 12-23-2010, 10:15 PM

They're included.. and having bite on a stud really outweighs the minimal time they take to swap. Especially when they're included.. but you could always bolt them up and see.

nismo 1234 · 12-24-2010, 07:22 AM

Quote:

Originally Posted by Josh@STILLEN

H&R will fit fine.. we have them in stock if that helps.. we've sold TONS of these for the 370Z, in every combination.

DRS is the style with the longer studs included: STILLEN : H&R TRAK+ Wheel Spacers

HR2065662 is the part number you're looking for..

Thanks

12-22-2010, 07:34 PM	#1 (permalink)
nismo 1234 Track Member Join Date: May 2010 Location: Canada BC Posts: 501 Drives: 10 370z M6 40th Rep Power: 15	10mm spacer for the rear hey guys, so i have a set of TE37 19x9.5 and 19x10.5 and +22 all around.. i need 10mm spacer in the rear to make it fit even better.. im not looking for bolt ons, im looking for new studs also. but a local shop is telling me that they cant guarantte that H&R 10mm spacers will fit since H&R cant even be sure themselves. they said ichiba will work, but they make horrible studs? im not sure if thats true, the claimed that the studs broke when they tried to install it last time. they are saying that i should go with nismo studs and ichiba 10mm spacer. but its pricy.. 3 times the price if i only got ichiba spacer and studs does anyone have the H&R 10mm spacer installed with new studs?? or anyone ahve ichiba stud and spacers?? thanks

12-23-2010, 12:28 AM	#3 (permalink)
christian370z A True Z Fanatic Join Date: Jul 2010 Location: Newport Beach Posts: 3,900 Drives: 2010 370Z/Saab 900se Rep Power: 431	A 10mm spacer in the rear should bring the offset out nicely. There is a debate about whether the bolt on style spacers such as the Ichiba V2s are safe to use as they essentially add weak points to the wheels because they have two sets of studs holding the wheel to the hub instead of studs built into the hub like the H&Rs. I am trying to figure that out personally; I have seen reviews of people having the Ichibas fail by snapping studs while many have run them for years and have never had an issue. __________________ -320whp / 259wftlbs- SP Rays -- RE-11s -- SpecialtyZ Tune -- Swift Springs -- Stillen 25R Oil Cooler -- Stillen G3 Intakes -- Berk HFCs -- F.I. 12" CBE -- Stillen Sway Bars -- Es14 Spring -- INGS+1 lip -- CF Spoiler -- GTR Start Button -- VLED Parking Lights -- PWJDM V2 shift knob

12-23-2010, 03:18 AM	#5 (permalink)
chuckd05 A True Z Fanatic Join Date: Oct 2009 Location: NY Posts: 2,391 Drives: No longer a Z Rep Power: 19	HRs should work just fine... get them __________________ 09 370Z 6M PW - FBO Best 1/4 mile = 12.926 @ 109 SOLD -- 08 BMW 135i - FBO 12.1@120mph SOLD -- white 09 e92 335 Coupe Mtech - 11.9 @ 119 :-)

12-23-2010, 09:39 AM	#6 (permalink)
ClemsonWill A True Z Fanatic Join Date: Jul 2010 Location: Charleston, SC Posts: 12,045 Drives: a Civic VP! Rep Power: 444	I agree. Get the H&Rs. __________________ Slightly modded

12-23-2010, 12:27 PM	#7 (permalink)
phelan A True Z Fanatic Join Date: Apr 2009 Location: CA Age: 38 Posts: 9,513 Drives: Scoobaroo Rep Power: 3406	what the hell? i had the h&r 10mm dsr spacers on with my ce28s, +22 all around just like yours. they worked fine. __________________ 凛 ('Rin') - 2009 Nissan 370Z With silence comes peace. With peace comes freedom. With freedom comes silence.

12-22-2010, 08:08 PM	#2 (permalink)
Matthew Track Member Join Date: Apr 2010 Location: Clemson, SC Posts: 519 Drives: Red Rocket Rep Power: 16	Why would they not ?? I looked it up the 10mm from H&R should fit the part # is HR2065662.

12-23-2010, 10:13 PM	#10 (permalink)
RCZ A True Z Fanatic Join Date: Nov 2008 Location: Miami Posts: 6,403 Drives: '09 370Z Rep Power: 1118	Is it mandatory to install extended studs with 10mm spacers? I guess it would depend on the design of the wheel?

12-23-2010, 10:15 PM	#11 (permalink)
Josh@STILLEN The370Z.com Sponsor Join Date: Dec 2008 Location: Costa Mesa, CA Posts: 1,197 Drives: 2004 G35 Coupe 6MT Rep Power: 533	They're included.. and having bite on a stud really outweighs the minimal time they take to swap. Especially when they're included.. but you could always bolt them up and see.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
15mm Spacer installed (Rear)	Minicobra1	Wheels & Tires	72	05-26-2011 10:40 PM
OOI - 25 mm spacer up front 15 in rear - ever been done	Kastley85891	Wheels & Tires	15	07-04-2010 07:33 AM
WTF: 10mm rear spacer	abakja1	Wheels & Tires	6	12-29-2009 06:54 PM
10mm spacer for rear wheel info and pics!!!	john370z	Wheels & Tires	17	04-12-2009 05:18 PM
6mm spacer on rear wheels (sport) GREAT!	john370z	Nissan 370Z General Discussions	20	04-06-2009 08:54 PM