10mm spacer for the rear

Originally Posted by Matthew

Why would they not ?? I looked it up the 10mm from H&R should fit the part # is HR2065662.

Originally Posted by christian370z

A 10mm spacer in the rear should bring the offset out nicely. There is a debate about whether the bolt on style spacers such as the Ichiba V2s are safe to use as they essentially add weak points to the wheels because they have two sets of studs holding the wheel to the hub instead of studs built into the hub like the H&Rs.

I am trying to figure that out personally; I have seen reviews of people having the Ichibas fail by snapping studs while many have run them for years and have never had an issue.

Originally Posted by nismo 1234

that part number is for a 350z, the local shop and H&R are both unsure if it can be used on a 370z
thanks for the part number tho! i googled the part number and found out that this site is selling H&R 10mm spacer for 370z with the same part number that you gave.
H&R Trak+ 10mm Wheel Spacer Kit 5x114.3 DRS - 370Z - performance parts



i would rather go with H&R if they fit, but if they dont than i would go with nismo studs and ichibas 10mm spacer. i rather not take the risk of my studs breaking

Originally Posted by Josh@STILLEN

H&R will fit fine.. we have them in stock if that helps.. we've sold TONS of these for the 370Z, in every combination.

DRS is the style with the longer studs included: STILLEN : H&R TRAK+ Wheel Spacers

HR2065662 is the part number you're looking for..