The "Will it fit?" thread

[Rusty]

Originally Posted by Kaden44

Need help guys. Looking to do a pretty meaty setup. Here are specs I'm looking at:

On H&R springs with front and rear camber arms.
Wheels I'm looking to do:
-19x10 +30 front 275/35/19
-19x12 +28 rear 325/30/19

I'm wanting a pretty flush setup with close to stock camber, should I be ok with these wheel specs?

I ran a set-up close to that. That was perfect at stock height.
Front 19x9.5 +25, 275/35-19
Rear 19x12 +28, 325/30-19

Now I have 345/30-19 on my 19x12 +25, which poke about 3/8" with camber set at -1.75. I'm going to reset my camber to -1.5 for the track. It's going to poke even more.

[Kaden44]

Originally Posted by Rusty

I ran a set-up close to that. That was perfect at stock height.
Front 19x9.5 +25, 275/35-19
Rear 19x12 +28, 325/30-19

Now I have 345/30-19 on my 19x12 +25, which poke about 3/8" with camber set at -1.75. I'm going to reset my camber to -1.5 for the track. It's going to poke even more.

Ok cool. Then I should be really safe with the offsets I was thinking? Should be just flush or would it be set inside the wheel well a little bit? If so then maybe I need to lower the offset a tad.

[Rusty]

First pic is the 275/35-19 and 325/30-19.

Second pic is 275/35-19 and 345/30-19.

[SlideHappy]

Will 20x10.5 +30 with 275/35/20 fit and not rub in the front with factory suspension?