The "Will it fit?" thread

SunnyDays · 02-12-2018, 04:01 PM

Are PCD Adaptors safe? IE H&R do a 5X120 to 5x114.3 20mm PCD Adapter. (Wanting to use some alloys I bought and had drilled for my BMW on the 370Z)

I have not heard of many people using these and would appreciate some input

Thanks!

Hotrodz · 02-12-2018, 04:03 PM

Quote:

Originally Posted by Zerafian

11.5" wide wheel....what tire

Iv done my searching on google, with a couple results and searched here with 11.5" wheel as my phrasing, with no luck.

Seeing if someone here might have a recommendation or a link. Im not looking for meaty, closer to a 315/25 tire but yeah, Im having trouble finding that. Maybe even a 325/25.

You should be fine with a 285 to 325 size tire.

Sent from my SM-N910P using Tapatalk

Zerafian · 02-12-2018, 04:16 PM

Quote:

Originally Posted by Hotrodz

You should be fine with a 285 to 325 size tire.

Sent from my SM-N910P using Tapatalk

285 seems like a bit of a stretch but Im still considering 305/30s though.

Hotrodz · 02-12-2018, 04:22 PM

Quote:

Originally Posted by Zerafian

285 seems like a bit of a stretch but Im still considering 305/30s though.

Lol, it is but can be done. I wouldn't do it! I run 315/30 on an 18x11 wheel.

Sent from my SM-N910P using Tapatalk

Zerafian · 02-12-2018, 04:31 PM

Quote:

Originally Posted by Hotrodz

Lol, it is but can be done. I wouldn't do it! I run 315/30 on an 18x11 wheel.

Sent from my SM-N910P using Tapatalk

well yeah...we've all seen some stupid *** sh*t. Im not interested in being an idiot. I just want a safe tire size that has this kind of "arrangement" on the wheel. Im the kind of person that wont run anything smaller than a 275/30 on a 10.5" wide wheel.

jchammond · 02-12-2018, 06:05 PM

Quote:

Originally Posted by Zerafian

well yeah...we've all seen some stupid *** sh*t. Im not interested in being an idiot. I just want a safe tire size that has this kind of "arrangement" on the wheel. Im the kind of person that wont run anything smaller than a 275/30 on a 10.5" wide wheel.

I have a new pair of 305/30's & 325/30's in Michelin PSS's & they measure a tad wider than what the Rack has posted...right at 12.75" section on the 305's & 13.5" on the 325's.
Either will fit the 11.5" wheel,,,just additional 3/8" of rubber off each side of rim w/325's

Spooler · 02-12-2018, 06:33 PM

Quote:

Originally Posted by Zerafian

taking a look at your car now

I dont know man, Id prefer to drop the car right at tire level or slightly below. Ill also be running around -2.5 camber. My offset will be +15. At least those are the specs I hope will get me the look I desire.

You want a that low rider look. I want the, I can put the power to the ground look. The camber was more negative in the picture. My alignment was off some. My post was for Boosted Performance anyway.

jchammond · 02-12-2018, 06:57 PM

Pics not very good; but an unmounted 325/30/19 is wider than a Nitto Invo 345/30...both are lying flat on floor.

Sent from my iPhone using Tapatalk

Zerafian · 02-12-2018, 07:16 PM

Quote:

Originally Posted by Spooler

You want a that low rider look. I want the, I can put the power to the ground look. The camber was more negative in the picture. My alignment was off some. My post was for Boosted Performance anyway.

for sure, your feedback was helpful though, no doubt about that.

Zerafian · 02-12-2018, 07:42 PM

Quote:

Originally Posted by jchammond

Pics not very good; but an unmounted 325/30/19 is wider than a Nitto Invo 345/30...both are lying flat on floor.

Sent from my iPhone using Tapatalk

thanks man, yeah Iv done a lot of reading that tire model and make can make a big difference. I was looking at Michelin pilot sports from the get go so the info is helpful for sure.

jchammond · 02-12-2018, 07:56 PM

Quote:

Originally Posted by Zerafian

thanks man, yeah Iv done a lot of reading that tire model and make can make a big difference. I was looking at Michelin pilot sports from the get go so the info is helpful for sure.

I can provide some more pics & measurements if needed.
Recovering from accident & gets bored sitting around house- I got them in the house with me staying warm.

Spooler · 02-12-2018, 08:01 PM

Quote:

Originally Posted by Zerafian

for sure, your feedback was helpful though, no doubt about that.

I could go lower if I wanted too. You could make my size fit perfect lowered with all the SPL adjustments I have. You can make just about anything fit perfect. Compared to the stock Nismo wheels I am +7 rear and +17 front from what I remember.

jchammond · 02-12-2018, 08:14 PM

Here’s 2 stacked on top of each other.
25.5” for 305’s & 27” for 325’s

Sent from my iPhone using Tapatalk

Zerafian · 02-12-2018, 08:23 PM

Quote:

Originally Posted by jchammond

I can provide some more pics & measurements if needed.
Recovering from accident & gets bored sitting around house- I got them in the house with me staying warm.

Im not gonna say no man, its all gonna help me. Im so use to dealing with 9.5/10.5 wheels. This aggressive setup Im going with on the car is new to me. I can only spend so much damn time on google.

jchammond · 02-12-2018, 08:39 PM

Quote:

Originally Posted by Zerafian

Im not gonna say no man, its all gonna help me. Im so use to dealing with 9.5/10.5 wheels. This aggressive setup Im going with on the car is new to me. I can only spend so much damn time on google.

The bead design on the 305’s are actually a bit inward with a bead guard ... more designed for a 10.5 or 11” wheel.
The 325’s are for 11 & up.

02-12-2018, 06:57 PM	#2513 (permalink)
jchammond A True Z Fanatic Join Date: Nov 2014 Location: South Carolina Age: 57 Posts: 15,204 Drives: 13’ 370Z TS 7A/T Rep Power: 2684394	Pics not very good; but an unmounted 325/30/19 is wider than a Nitto Invo 345/30...both are lying flat on floor. Sent from my iPhone using Tapatalk Zerafian likes this. __________________ MazWorx built long block \| FI-TT-100 Stage 2.75 \| IPT built 7A/T http://www.the370z.com/members-370z-...s-musings.html

02-12-2018, 08:14 PM	#2518 (permalink)
jchammond A True Z Fanatic Join Date: Nov 2014 Location: South Carolina Age: 57 Posts: 15,204 Drives: 13’ 370Z TS 7A/T Rep Power: 2684394	Here’s 2 stacked on top of each other. 25.5” for 305’s & 27” for 325’s Sent from my iPhone using Tapatalk Rusty and Hotrodz like this. __________________ MazWorx built long block \| FI-TT-100 Stage 2.75 \| IPT built 7A/T http://www.the370z.com/members-370z-...s-musings.html

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Official The370Z "Hot Girls with Hot cars" thread NSFW 01.01.09	AK370Z	Gentleman's Club	187	01-12-2011 12:24 AM
why did the thread "Sharing a bad experience with my 370Z" get closed?	TheSnakeJake	Nissan 370Z General Discussions	1	03-26-2010 11:35 PM
Why there isn't a "Monterey Blue"370Z thread?	Devil Z	Nissan 370Z Photos / Spyshots / Video / Media Gallery	9	08-24-2009 01:55 PM
Official "Guess the Stig's Time" Thread	ResIpsa	Nissan 370Z General Discussions	11	07-27-2009 09:45 PM
Official "Nissan 370Z spotted in Japan" Thread	AK370Z	Nissan 370Z Photos / Spyshots / Video / Media Gallery	120	05-01-2009 09:30 AM

02-12-2018, 04:01 PM	#2506 (permalink)
SunnyDays Base Member Join Date: Oct 2016 Location: United Kingdom, Posts: 76 Drives: Nismo 370Z Rep Power: 8	Are PCD Adaptors safe? IE H&R do a 5X120 to 5x114.3 20mm PCD Adapter. (Wanting to use some alloys I bought and had drilled for my BMW on the 370Z) I have not heard of many people using these and would appreciate some input Thanks!