Tips for jacking up car?

kenchan · 02-02-2010, 04:26 PM

i have a little piece of oak (not sure about 2" wide) that i cut from scrap that i use on the inside-side of the rail where there is a little bump on the car. it's placed between the rail and watever black body part that is.

my hydraulic has a flat platform so i just place the piece of scrap wood on it and raise the car at the jack points. i would not want to put the weight on the tip of the rails.

Modshack · 02-02-2010, 04:46 PM

Best way!......

02-02-2010, 04:46 PM	#2 (permalink)
Modshack A True Z Fanatic Join Date: Mar 2009 Location: Greenville NC Posts: 2,883 Drives: 370Z Sport Rep Power: 978	Best way!...... __________________ Steal my car! (SOLD)...Now Porsche Cayman S Oil Cooler DIY: Here!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
bent my jacking point underneat	thispecialk	Exterior & Interior	31	06-30-2012 09:15 AM
Cool Z/G tips	AK370Z	Nissan 370Z General Discussions	16	12-30-2009 01:15 PM
Tire Replacement Tips	Matt	Wheels & Tires	14	11-22-2009 01:34 PM
Just Muffler and tips?	ddvette9	Intake/Exhaust	7	10-05-2009 10:20 AM

02-02-2010, 04:26 PM	#1 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141522	i have a little piece of oak (not sure about 2" wide) that i cut from scrap that i use on the inside-side of the rail where there is a little bump on the car. it's placed between the rail and watever black body part that is. my hydraulic has a flat platform so i just place the piece of scrap wood on it and raise the car at the jack points. i would not want to put the weight on the tip of the rails.