Wheel size/offset?

jchammond · 08-02-2018, 08:52 PM

Quote:

Originally Posted by ClemsonVQdude

I dont want to keep the stock wheels, I want new wheels. i will be sticking with 18s. & i mean meaty tire set up.
Okay let me rephrase, I know what range offset is best, but not with spacers. And I dont wan’t to have to worry about any rubbing or clearing the breaks or anything. So I’m really just trying to figure out what the spacers affect in terms of wheel offset. Maybe I should just ditch them if new wheels & tires will fill out the wheel well?
No I’m not talking about camber I just meant a concave wheel.

If your spacers are as thick as you posted (1.5"F & 1.25"R)(38mm & 32mm), then you have turned your base wheels into 18x8+5,18x9-17

jchammond · 08-02-2018, 08:56 PM

more negative camber will give you wheel lean...Roughly 1/2" per degree.
Factory specs have the rear wheels negative camber'd twice as much as front.

jchammond · 08-02-2018, 08:59 PM

So, I have 1.5 inch spacers in the back and 1.25 inch in the front, I’m wanting to go up to 245/40/18 in the front and 275/45/18 in the back and also wanting some concave aftermarket wheels. Im not exactly sure how the whole offset thing works and how the spacers affect it, what should I be looking for in a wheel in terms of width and offset for it to look right and not throw everything off?[/QUOTE]

You must mean 245/45's & 275/40's...both are listed 26.7" tall.

OptionZero · 08-02-2018, 11:05 PM

Quote:

Originally Posted by bunk

How much of a drop is that and what are the tire specs? That's perfect for what I'm looking for!

It's 285/35/18 and 295/35/18

from here:
18's on a 370z

OptionZero · 08-02-2018, 11:08 PM

Quote:

Originally Posted by jchammond

If your spacers are as thick as you posted (1.5"F & 1.25"R)(38mm & 32mm), then you have turned your base wheels into 18x8+5,18x9-17

Quote:

Originally Posted by jchammond

more negative camber will give you wheel lean...Roughly 1/2" per degree.
Factory specs have the rear wheels negative camber'd twice as much as front.

Quote:

Originally Posted by jchammond

So, I have 1.5 inch spacers in the back and 1.25 inch in the front, I’m wanting to go up to 245/40/18 in the front and 275/45/18 in the back and also wanting some concave aftermarket wheels. Im not exactly sure how the whole offset thing works and how the spacers affect it, what should I be looking for in a wheel in terms of width and offset for it to look right and not throw everything off?

As amusing as it is to watch this keep going, everyone's making this so much harder than it needs to be, including our clueless thread starter

Instead of ******* around with spacer math (which really . . . isn't that hard)

TAKE OFF THE SPACERS

YOU ARE ALREADY BUYING NEW WHEELS

DUMP THE SPACERS

GET WHEELS IN THE SIZE AND OFFSET YOU WANT

Dig through the wheel threads

Find a look that you like

Copy the sizes

Find a wheel you like

Get the nearest possible sizes

Buy those wheels and tires and whatever other ****

Install

Done

its REALLY simple

given that you don't seem to understand wheel sizing and you're asking about 18's, i'm going to assume an aggressive setup involving coilovers and suspension arms and custom alignment and fenderwork is more than you're looking for

so just copy someone on springs and shocks and be done with it

cooltoy · 08-02-2018, 11:10 PM

Quote:

Originally Posted by bunk

How much of a drop is that and what are the tire specs? That's perfect for what I'm looking for!

Swift Spec-R Lowering Springs. SPC Rear Camber Arms Kit.

Wheels: Enkei RS05RR
Color: Mate Gunmetal
Specs: 18x9.5+22 (F) & 18x11+16 (R)
Tires: 285/35/18 (F) & 295/35/18 (R)

ClemsonVQdude · 08-03-2018, 01:14 PM

Quote:

Originally Posted by KamiSpeed

Ok, so this thread is a bit confusing! But, hopefully I can clear it up somewhat.

In your case, you want a flush concave wheel setup. In order for you to get a concave face wheel installed, then you NEED to uninstall the spacers you currently have. Since if you leave them on, the new wheels you purchase need to have a high offset to compensate, which in turn, leads to a flat faced wheel.

Most popular 18" size wheels for flush concave 370Z are going to be this:

18x9.5 +12 ~ +22 Front
18x10.5 +12 ~ +22 OR 18x11.0 +15 ~ +20

There are a lot of different variations, but this seems to be the standard without any work to the fenders (i.e. rolling / pulling). But, again. Those sizes you can run, but WITHOUT spacers.

Check this 370Z out. Sitting on Enkei RS05-RR 18x9.5 +22 Front / 18x11.0 +16 Rear

Is this the type of setup you are looking at?

Yes. Thats the answer I was looking for, thanks!

08-02-2018, 08:56 PM	#17 (permalink)
jchammond A True Z Fanatic Join Date: Nov 2014 Location: South Carolina Age: 57 Posts: 15,204 Drives: 13’ 370Z TS 7A/T Rep Power: 2684394	more negative camber will give you wheel lean...Roughly 1/2" per degree. Factory specs have the rear wheels negative camber'd twice as much as front. __________________ MazWorx built long block \| FI-TT-100 Stage 2.75 \| IPT built 7A/T http://www.the370z.com/members-370z-...s-musings.html

08-02-2018, 08:59 PM	#18 (permalink)
jchammond A True Z Fanatic Join Date: Nov 2014 Location: South Carolina Age: 57 Posts: 15,204 Drives: 13’ 370Z TS 7A/T Rep Power: 2684394	So, I have 1.5 inch spacers in the back and 1.25 inch in the front, I’m wanting to go up to 245/40/18 in the front and 275/45/18 in the back and also wanting some concave aftermarket wheels. Im not exactly sure how the whole offset thing works and how the spacers affect it, what should I be looking for in a wheel in terms of width and offset for it to look right and not throw everything off?[/QUOTE] You must mean 245/45's & 275/40's...both are listed 26.7" tall. __________________ MazWorx built long block \| FI-TT-100 Stage 2.75 \| IPT built 7A/T http://www.the370z.com/members-370z-...s-musings.html

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[FOR SALE] Work VS-XX wheel. 20x9.5 -2 offset front, 20x11 -1 offset rear	VQ37	Parts for sale (Private Classifieds)	15	08-19-2016 07:22 PM
Wheel Offset	jnslance	Wheels & Tires	5	02-23-2015 03:46 PM
18" Base OEM rim size and offset	DEpointfive0	Wheels & Tires	0	04-27-2012 01:08 PM
What're the Volks ce28n size and offset on the Amuse Z?	WWJD	Wheels & Tires	20	08-11-2011 08:22 PM
Sport wheels size and offset?	speedworks	Wheels & Tires	3	09-29-2009 07:48 PM