UpRev to help with passing inspection?

wdkwang · 01-06-2015, 04:50 PM

Quote:

Originally Posted by theDreamer

Look at ANMVQ post, you need correct extenders so the system reads correctly.
Uprev "could" help by tuning the car and see if brings it back inline so it does not throw the code while trying to leave on the sensors but not 100% guarantee.

I found that extenders wouldn't do anything in my particular case with the pos Motordyne V1 pipes. You'll see in my posted thread in the past that the o2 bongs are completely covered up with metal for reasons I do not know (Warning do not buy Motordyne products).
I feel like I'm in a bit of a bind.

thangcu35 · 01-07-2015, 09:47 AM

Quote:

Originally Posted by wdkwang

I found that extenders wouldn't do anything in my particular case with the pos Motordyne V1 pipes. You'll see in my posted thread in the past that the o2 bongs are completely covered up with metal for reasons I do not know (Warning do not buy Motordyne products).
I feel like I'm in a bit of a bind.

The metal wires in there is to reduce the amount of exhaust reading at the sensor. Seriously, buy o2 defoulers $3 each at any autozone or advance auto parts install and watch the code disappear for good. Some cars require different defouler length to correctly offset the o2 readings.

Edit. Just saw the pics in your other thread. I dont know why it was completely shut off from the bung either. It shouldnt be like that. My guess is they forgot to drill a hole before welding on the o2 bung

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Hfc passing inspections in nj?	jamesj1996	Intake/Exhaust	0	06-19-2014 10:55 AM
Berk HFC passing emissions/CELs	wolf370z	Intake/Exhaust	13	09-08-2010 06:23 PM
Just passing time til the site is fixed...	SophiaZ	Nissan 370Z General Discussions	10	01-12-2010 08:04 PM
Passing NJ Inspection with an F/I Z???	nightfire	Forced Induction	26	07-15-2009 08:18 PM
HFC passing emissions???	john370z	Intake/Exhaust	27	07-09-2009 11:58 PM