Warning do not buy Motordyne products

wdkwang · 11-15-2013, 07:58 PM

I have the MotorDyne test pipes v1. 3 separate times this piece of sh1t test pipe has cracked in 3 different locations, and needed repair welding.
The welder at the shop has said that the metal is cheap and thin.
Last night driving home, the extended o2 bong completely fell off and dragged on the highway all the way home. Luckily I was only an exit away.
Looking at the o2 bong, I thought it was just hardened carbon buildup. Nope, it's metal. I had a hole drilled through it to confirm, which also makes sense why I've always had a check engine code running these test pipes since there was absolutely no air going to the o2 bong in the first place.
Motordyne is absolute garbage. Never getting anything from them ever again.

wdkwang · 11-15-2013, 08:01 PM

ka24king · 11-15-2013, 08:04 PM

Wow that's pretty bad good find and right in time was about to purchase those r-specs

kenchan · 11-15-2013, 08:04 PM

Ok, got it!

Mt Tam I am · 11-15-2013, 08:42 PM

This is horrible workmanship if this term can even be used.

synolimit · 11-15-2013, 09:12 PM

**** happens. Metal gets hot, it weakens. You want stuff that doesn't break, put you're money where your mouth is. You're gonna pay double though for 321SS vs 304SS. Also you said version 1. How old are these? A new company probably isn't going to shell out tons of money for the highest quality 304SS. Over time their new versions might have it or they went thicker. Ragging on a company for a first gen product isn't really fair. FI mufflers first gen drug along the ground so I say screw all FI products, never buy that crap too, right? Was Kia the best of the best their first time out? They may not have a warranty but that doesn't mean Tony can't be called and asked "what should I do?"

Joepro · 11-15-2013, 09:28 PM

A weld broke on the Fast intentions exhaust I have, the left rear hanger weld,,,also a weld is broke on my right Motordyne art pipe on the support they have between the pipes. They must be crap companies. This car also obviously sees road salt, it will eat the crap out of the metal, look at those pipes...

wdkwang · 11-15-2013, 09:31 PM

Quote:

Originally Posted by synolimit

**** happens. Metal gets hot, it weakens. You want stuff that doesn't break, put you're money where your mouth is. You're gonna pay double though for 321SS vs 304SS. Also you said version 1. How old are these? A new company probably isn't going to shell out tons of money for the highest quality 304SS. Over time their new versions might have it or they went thicker. Ragging on a company for a first gen product isn't really fair. FI mufflers first gen drug along the ground so I say screw all FI products, never buy that crap too, right? Was Kia the best of the best their first time out? They may not have a warranty but that doesn't mean Tony can't be called and asked "what should I do?"

It may be v1 but it's unheard for a relatively expensive product to crack 3 separate times. No warranties. The fabricator must have been a newby or smoking some good stuff the day they made mine. This is the type of quality I'd expect from eBay products

wdkwang · 11-15-2013, 09:40 PM

Quote:

Originally Posted by Joepro

A weld broke on the Fast intentions exhaust I have, the left rear hanger weld,,,also a weld is broke on my right Motordyne art pipe on the support they have between the pipes. They must be crap companies. This car also obviously sees road salt, it will eat the crap out of the metal, look at those pipes...

Joe, thank you. I feel like an idiot. I forgot the name of the company. It's not ARK, it's Motordyne. My apologies to ARK. Motordyne is the problem.

JARblue · 11-15-2013, 09:45 PM

Glad we got that sorted out

Good job getting the title changed, but please edit the original post to correct the additional company name references

wdkwang · 11-15-2013, 09:49 PM

Quote:

Originally Posted by JARblue

Glad we got that sorted out

Good job getting the title changed, but please edit the original post to correct the additional company name references

I changed it on the title and everywhere else i mentioned ARK but it doesn't change on the title in the listing

JARblue · 11-15-2013, 09:50 PM

Quote:

Originally Posted by wdkwang

I changed it on the title and everywhere else i mentioned ARK but it doesn't change on the title in the listing

We can PM the mods

synolimit · 11-15-2013, 09:58 PM

Quote:

Originally Posted by wdkwang

It may be v1 but it's unheard for a relatively expensive product to crack 3 separate times. No warranties. The fabricator must have been a newby or smoking some good stuff the day they made mine. This is the type of quality I'd expect from eBay products

Lol pssssst, (whispering) everything's made in china.

Trips · 11-15-2013, 10:12 PM

Retitled.

And sorry to hear about the crappy weld.

1slow370 · 11-15-2013, 10:16 PM

304 wouldn't do that unless it was hella thin, this probably 406 or another 400 series, i have a set of gtm test pipes purchased back in march of 09 and they are still shiny. the scariest thing to me is that the weld was good it was all the tube around the weld that fatigued and broke, meaning weld it back on and it will fail again, also yes they forgot to drill the hole for the j tube before they welded it definitely the cause of the SES light, drill a 3/8 in hole in it into the tube before you weld it back on, or just throw these things out, also a brace to the tube would help too.

11-15-2013, 08:01 PM	#2 (permalink)
wdkwang Track Member Join Date: Nov 2010 Location: N/A Posts: 899 Drives: slidewayz Rep Power: 20	__________________ Powerhouse Amuse \| K&N Typhoon Intakes \| MotorDyne ART Pipes \| Borla Catback Exhaust \| B&M Short Shifter \| Intake Ducts \| Ichiba 25mm F/R Spacers \| Carbon Fiber Interior Vinyl Wrap \| Tints \| 10000k HIDs \| Vtak, yo!

11-15-2013, 08:42 PM	#5 (permalink)
Mt Tam I am A True Z Fanatic Join Date: Jun 2010 Location: California Posts: 10,709 Drives: 370Z T/S/N 6MT & XKE Rep Power: 3842	This is horrible workmanship if this term can even be used. __________________ "Does the carpet match the drapes? NO!!! I don't date bald women." Nissan Motorsports 34R Oil Cooler. Stillen CBE. Hotchkis Sport Sway Bars. KW Variant 3 Coilover System. Stillen Gen3 CAI. Michelin Pilot Super Sport. Stillen Brake Ducts. Carbotech™ XP10/XP8 Pads. Z1 Front Rotors. Z1 Stainless Brake Lines. Two degrees of camber

11-15-2013, 09:12 PM	#6 (permalink)
synolimit A True Z Fanatic Join Date: May 2013 Location: Columbus, OH Posts: 5,051 Drives: 2013 Silver 370z Rep Power: 3388	**** happens. Metal gets hot, it weakens. You want stuff that doesn't break, put you're money where your mouth is. You're gonna pay double though for 321SS vs 304SS. Also you said version 1. How old are these? A new company probably isn't going to shell out tons of money for the highest quality 304SS. Over time their new versions might have it or they went thicker. Ragging on a company for a first gen product isn't really fair. FI mufflers first gen drug along the ground so I say screw all FI products, never buy that crap too, right? Was Kia the best of the best their first time out? They may not have a warranty but that doesn't mean Tony can't be called and asked "what should I do?" __________________ 13 370z- Last edited by synolimit; 11-15-2013 at 09:48 PM.

11-15-2013, 09:28 PM	#7 (permalink)
Joepro A True Z Fanatic Join Date: Aug 2012 Location: Athens ohio Posts: 1,213 Drives: Company car Rep Power: 33	A weld broke on the Fast intentions exhaust I have, the left rear hanger weld,,,also a weld is broke on my right Motordyne art pipe on the support they have between the pipes. They must be crap companies. This car also obviously sees road salt, it will eat the crap out of the metal, look at those pipes... 2sl0w likes this. __________________ Swift\|Koni\|SPC\| FI CBE\|Z1\|Stillen\|Sbend\|Zspeed\|R/T Tuned\|523 whp\|458 tq\|10.5 psi\|SOLD Joepro's Journal\|Joepro's Boosted Performance Build \|Pittsburgh-Western-Pa-Ohio-Wv-Group

11-15-2013, 09:45 PM	#10 (permalink)
JARblue A True Z Fanatic Join Date: Mar 2011 Location: Austin, TX Age: 43 Posts: 36,449 Drives: 11 Z34, 98 E36 M3 Rep Power: 2684440	Glad we got that sorted out Good job getting the title changed, but please edit the original post to correct the additional company name references __________________ 2011 370Z 6MT Sport Gun Metallic \| ARC \| CJM \| Ecutek \| FI \| Fujimura \| R2C \| SPL \| Stillen \| TWM \| Z1 \| ZSpeed \|

11-15-2013, 08:04 PM	#3 (permalink)
ka24king Track Member Join Date: Feb 2013 Location: texas Posts: 582 Drives: '10 370z 40th annv. Rep Power: 13	Wow that's pretty bad good find and right in time was about to purchase those r-specs

11-15-2013, 08:04 PM	#4 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141520	Ok, got it!

11-15-2013, 10:12 PM	#14 (permalink)
Trips Administrator Join Date: May 2009 Location: Disneyland, Ca Posts: 8,728 Drives: 🔰 Rep Power: 10	Retitled. And sorry to hear about the crappy weld. wdkwang and JARblue like this. __________________

11-15-2013, 10:16 PM	#15 (permalink)
1slow370 A True Z Fanatic Join Date: Aug 2009 Location: In the D Posts: 3,732 Drives: v8 74 260z ;) Rep Power: 7250	304 wouldn't do that unless it was hella thin, this probably 406 or another 400 series, i have a set of gtm test pipes purchased back in march of 09 and they are still shiny. the scariest thing to me is that the weld was good it was all the tube around the weld that fatigued and broke, meaning weld it back on and it will fail again, also yes they forgot to drill the hole for the j tube before they welded it definitely the cause of the SES light, drill a 3/8 in hole in it into the tube before you weld it back on, or just throw these things out, also a brace to the tube would help too. __________________ ANSWER PRICE LIST Answers - - - - - - - - - - - - - - - - $0.75 Answers (requiring thought) - - - - $1.25 Answers (correct) - - - - - - - - - - $12.50 Last edited by 1slow370; 11-15-2013 at 10:22 PM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
New Products	Shineauto	Exterior & Interior	55	06-26-2015 06:41 PM
EVO-R products?	sunkist350z	Exterior & Interior	21	03-12-2013 01:11 AM
Evo-R products	370z_Sniper	Exterior & Interior	53	03-27-2012 12:56 PM
AMUSE products	VancouverZ34	Intake/Exhaust	5	03-30-2010 03:49 PM