UpRev tuned @ Granite State Dyno 8/17

mag_black · 08-16-2013, 10:49 PM

I'm starting this thread for my dyno session tomorrow at 9am. I will have a base run w/ FI 18" CBE and Stillen G3's. After, I'll install Motordyne ART pipes and do UpRev tuning.

I would imagine that I'm getting one run w/ the ART pipes before they start tuning, so I should somewhat see what the pipes have added to the party.

forza370z is stopping by and we'll have some before/after videos and dyno sheets. For those that are tuned, please feel free to add some advice.

Things I have so far from searching:

Maps:
Stock
valet
anti-theft
tuned 93
tuned 93 wstar's smooth throttle

Review: Granite State
Alex and the guys were very nice and knowledgeable. I made 3 base runs for $80 and was only charged 1 hour for test pipe install (labor $80/hr). I couldn't complain about that. They made quick work and had me tuning in no time.

Pricing:
labor $80/hr
uprev tune/dyno $500
dyno 3 runs $80
Re-tune/dyno $150

I spoke to Alex a week later about tweaking my tune. I wanted fan control to be changed and offered to have me come in free of charge! If you guys ever want work done, I would highly recommend them to anyone in the NE area. Some other tuners/shops that I won't name, charge $120/labor and a lot more for re-tuning. I was also told that Alex tunes for other big name shops in the NE area.

Dyno Sheets
=== Base run w/ FI CBE and Stillen G3's

( Click to show/hide )

=== Added ART pipes

FI|Stillen
FI|Stillen
FI|Stillen|ART

( Click to show/hide )

( Click to show/hide )

Post tune review and findings
UpRev tuned @ Granite State Dyno 8/17

Leuz · 08-17-2013, 12:11 AM

Very interested in seeing the results between stock tune and TP/tune. Sub'd

mag_black · 08-17-2013, 10:39 AM

Added base run w/ cbe and intake -- 80 degrees and 50% humidity

370Z JT · 08-17-2013, 11:53 AM

Nice.

I'm guessing 320whp, 260wtq after pipes and tune.

tiger123 · 08-17-2013, 11:54 AM

Sub'd for results.

mag_black · 08-17-2013, 07:16 PM

Somewhat lack luster for numbers; I'm a bit heartbroken. We install test pipes and got 304/248 and then started tuning around 1:30pm. I'm not going to make excuses for heat and motor being heatsoaked -- it is what it is.

My final numbers never got any better than the 304/248 run which was just test pipes, no tune. A/F was corrected, he tried to add timing but it wouldn't allow more than 30 degrees when somewhat cool and 26 when heatsoaked.

Now w/ all that said, I feel the drivability of the vehicle is better than before. I feel like I have more midrange and car seems more responsive. I know it's not all about peak numbers, but I can't help but feel like I should've gotten more out of it. All in all, I'm happy w/ city driving, but I'm not w/ the numbers.

Maps:
Tuned 93, valet, Tuned 93 w/ wstar's throttle, same as 3, anti-theft. I'll post the sheet up in a bit

roy'sz · 08-17-2013, 11:28 PM

Change your filters in december and do some passes when its 50* out or so....then you will see your numbers you want.

mag_black · 08-18-2013, 04:35 PM

Quote:

Originally Posted by roy'sz

Change your filters in december and do some passes when its 50* out or so....then you will see your numbers you want.

Thanks; I'll definitely run it again when it's cooler out.

roy'sz · 08-18-2013, 05:01 PM

Rule #1 with anything performance...eliminate heat. I plan on redynoing my z in the winter and I plan on throwing bags of ice on top of the intake manifold along with the coolant line delete from the throttle bodies.

mag_black · 08-18-2013, 10:07 PM

I'm really bummed about the peak numbers. Not so much that they're not high enough, but that they didn't move from test pipe run and when tuning started.

I should have the files tomorrow for upload. For now, I'll post pics.

roy'sz · 08-19-2013, 06:52 AM

Depending on what you have on your car for mods tps won't net a lot of hp. When you have ambient temps that are that warm your car will start to cook on the dyno. When its cold out you will see better peak numbers. That's part of the reason you see cars doing dyno's at night at some shops because the weather is extremely cooler and less heat soak happens.

You will probably get around 310-315 once you change your filters and dyno run in the winter but I doubt anything higher than that.

mag_black · 08-19-2013, 12:48 PM

The 2nd dyno sheet I added only has numbers from cbe/intake/tp, cbe/intake and cbe/intake. I should have the other files today to see what the tuning is actually doing. If you look at sheet 1 and then sheet 2, you'll see that two of the sheet 1 runs made it on to sheet 2.

I have no idea what the tuning is doing because it's not sheet 2 at all, and the best numbers of the day are on sheet 2 which is only cbe/intake/tp. That's why I'm really not happy.

Any runs after "runfile_22.drf" (304/248) on sheet 2 didn't make anymore peak hp/tq.

roy'sz · 08-19-2013, 01:22 PM

Just curious....what gear were you doing pulls in? Also what was the time between pulls?

mag_black · 08-19-2013, 01:57 PM

4th and he would do 3 - 5 pulls. He let it rest probably about 2 - 3 times w/ about 10- 15 mins w/ fans on it. I have to look at my videos to confirm, but that seems about right.

When we talked about what was done. They only thing that was mentioned was corrected A/F and adding timing. IDK if I got the full explanation or not.

roy'sz · 08-19-2013, 03:42 PM

Having the right a to f makes all the difference. The reason you didnt see the numbers you wanted was because it wasn't a direct drive dyno....meanimg he meeded to do 5th gear pull. 5th has a 1:1 ratio where 4th is 1.something to 1. With as warm as it was you should be close to my numbers.

08-16-2013, 10:49 PM	#1 (permalink)
mag_black A True Z Fanatic Join Date: Mar 2013 Location: Massachusetts Posts: 1,400 Drives: 09 370Z MT6 Rep Power: 666	UpRev tuned @ Granite State Dyno 8/17 I'm starting this thread for my dyno session tomorrow at 9am. I will have a base run w/ FI 18" CBE and Stillen G3's. After, I'll install Motordyne ART pipes and do UpRev tuning. I would imagine that I'm getting one run w/ the ART pipes before they start tuning, so I should somewhat see what the pipes have added to the party. forza370z is stopping by and we'll have some before/after videos and dyno sheets. For those that are tuned, please feel free to add some advice. Things I have so far from searching: Maps: Stock valet anti-theft tuned 93 tuned 93 wstar's smooth throttle Review: Granite State Alex and the guys were very nice and knowledgeable. I made 3 base runs for $80 and was only charged 1 hour for test pipe install (labor $80/hr). I couldn't complain about that. They made quick work and had me tuning in no time. Pricing: labor $80/hr uprev tune/dyno $500 dyno 3 runs $80 Re-tune/dyno $150 I spoke to Alex a week later about tweaking my tune. I wanted fan control to be changed and offered to have me come in free of charge! If you guys ever want work done, I would highly recommend them to anyone in the NE area. Some other tuners/shops that I won't name, charge $120/labor and a lot more for re-tuning. I was also told that Alex tunes for other big name shops in the NE area. Dyno Sheets === Base run w/ FI CBE and Stillen G3's ( Click to show/hide ) === Added ART pipes FI\|Stillen FI\|Stillen FI\|Stillen\|ART ( Click to show/hide ) === Best Runs I made 306-308; My 306 run was the best in terms of performance gains. Best run comparisons: FI\|Stillen FI\|Stillen\|ARTs FI\|Stillen\|ARTs\|Uprev. ( Click to show/hide ) Post tune review and findings UpRev tuned @ Granite State Dyno 8/17 Leuz likes this. __________________ fujimura ≠ abbeyRoadCompany ≠ fastIntentions ≠ motordyne ≠ avantGarde ≠ ecutek ≠ nismo ≠ stillen ≠ stoptech ≠ gtm ≠ spl ≠ carbonfiberelement ≠ stance™ Last edited by mag_black; 08-22-2013 at 04:37 PM.

08-17-2013, 12:11 AM	#2 (permalink)
Leuz Track Member Join Date: Nov 2012 Location: NorCal Posts: 555 Drives: Bunny Rep Power: 13	Very interested in seeing the results between stock tune and TP/tune. Sub'd __________________ 2013 PW 370Z Touring+Sport, NAV Tint 35% side, 18% back \| RJM clutch pedal \| ZSpeed SS lines \| Stillen Gen3 CAI \| Fast Intentions HFC and TDX 12'' CF CBE \| UpRev

08-17-2013, 10:39 AM	#3 (permalink)
mag_black A True Z Fanatic Join Date: Mar 2013 Location: Massachusetts Posts: 1,400 Drives: 09 370Z MT6 Rep Power: 666	Added base run w/ cbe and intake -- 80 degrees and 50% humidity __________________ fujimura ≠ abbeyRoadCompany ≠ fastIntentions ≠ motordyne ≠ avantGarde ≠ ecutek ≠ nismo ≠ stillen ≠ stoptech ≠ gtm ≠ spl ≠ carbonfiberelement ≠ stance™

08-17-2013, 11:53 AM	#4 (permalink)
370Z JT A True Z Fanatic Join Date: Jan 2010 Location: United States Posts: 2,905 Drives: 370Z PW 7AT Rep Power: 378	Nice. I'm guessing 320whp, 260wtq after pipes and tune. __________________ Click for My Journal Top Secret \| EVO-R \| Fujimura Auto \| Shine Auto \| Seibon \| MRWorks \| Swift \| SPC \| SSR \| UpRev \| Project Kics \| NST \| Titek \| Eibach \| Nismo \| Whiteline \| Quaife \| Invidia \| Fly1 \| CF Element \| Carbon Signal

08-17-2013, 11:54 AM	#5 (permalink)
tiger123 Enthusiast Member Join Date: Jan 2013 Location: Chicago Posts: 367 Drives: 09 AT Tour/Sport/Nav Rep Power: 13	Sub'd for results. __________________ G2\|\|Berk CBE/HFC\|\|LED In-Out\|\|35% Tint\|\|V1\|\|GT-R Dome Lights\|\|JDM Rear Fog Light\|\|Z Speed Undershroud (SS)\|\|Red GT-R Start Button\|\|StopTech Rotors\|\|Project MU\|\|Z1 Oil Cooler\|\|EcuTek\|\|

08-17-2013, 07:16 PM	#6 (permalink)
mag_black A True Z Fanatic Join Date: Mar 2013 Location: Massachusetts Posts: 1,400 Drives: 09 370Z MT6 Rep Power: 666	Somewhat lack luster for numbers; I'm a bit heartbroken. We install test pipes and got 304/248 and then started tuning around 1:30pm. I'm not going to make excuses for heat and motor being heatsoaked -- it is what it is. My final numbers never got any better than the 304/248 run which was just test pipes, no tune. A/F was corrected, he tried to add timing but it wouldn't allow more than 30 degrees when somewhat cool and 26 when heatsoaked. Now w/ all that said, I feel the drivability of the vehicle is better than before. I feel like I have more midrange and car seems more responsive. I know it's not all about peak numbers, but I can't help but feel like I should've gotten more out of it. All in all, I'm happy w/ city driving, but I'm not w/ the numbers. Maps: Tuned 93, valet, Tuned 93 w/ wstar's throttle, same as 3, anti-theft. I'll post the sheet up in a bit __________________ fujimura ≠ abbeyRoadCompany ≠ fastIntentions ≠ motordyne ≠ avantGarde ≠ ecutek ≠ nismo ≠ stillen ≠ stoptech ≠ gtm ≠ spl ≠ carbonfiberelement ≠ stance™ Last edited by mag_black; 08-19-2013 at 08:55 PM.

08-17-2013, 11:28 PM	#7 (permalink)
roy'sz A True Z Fanatic Join Date: Aug 2011 Location: palmdale, ca Posts: 1,299 Drives: 2010 nissan 370z Rep Power: 15	Change your filters in december and do some passes when its 50* out or so....then you will see your numbers you want. mag_black likes this. __________________ https://www.youtube.com/watch?v=RtvG...data_playerARK HFC'S-ARK Grip-Stillen G3-M370-UPREV-Kinetix upper control arm-WC Latheworks-Stage2 Bad@$$ Driver(318whp/268tq)-

08-18-2013, 05:01 PM	#9 (permalink)
roy'sz A True Z Fanatic Join Date: Aug 2011 Location: palmdale, ca Posts: 1,299 Drives: 2010 nissan 370z Rep Power: 15	Rule #1 with anything performance...eliminate heat. I plan on redynoing my z in the winter and I plan on throwing bags of ice on top of the intake manifold along with the coolant line delete from the throttle bodies. __________________ https://www.youtube.com/watch?v=RtvG...data_playerARK HFC'S-ARK Grip-Stillen G3-M370-UPREV-Kinetix upper control arm-WC Latheworks-Stage2 Bad@$$ Driver(318whp/268tq)-

08-18-2013, 10:07 PM	#10 (permalink)
mag_black A True Z Fanatic Join Date: Mar 2013 Location: Massachusetts Posts: 1,400 Drives: 09 370Z MT6 Rep Power: 666	I'm really bummed about the peak numbers. Not so much that they're not high enough, but that they didn't move from test pipe run and when tuning started. I should have the files tomorrow for upload. For now, I'll post pics. __________________ fujimura ≠ abbeyRoadCompany ≠ fastIntentions ≠ motordyne ≠ avantGarde ≠ ecutek ≠ nismo ≠ stillen ≠ stoptech ≠ gtm ≠ spl ≠ carbonfiberelement ≠ stance™

08-19-2013, 06:52 AM	#11 (permalink)
roy'sz A True Z Fanatic Join Date: Aug 2011 Location: palmdale, ca Posts: 1,299 Drives: 2010 nissan 370z Rep Power: 15	Depending on what you have on your car for mods tps won't net a lot of hp. When you have ambient temps that are that warm your car will start to cook on the dyno. When its cold out you will see better peak numbers. That's part of the reason you see cars doing dyno's at night at some shops because the weather is extremely cooler and less heat soak happens. You will probably get around 310-315 once you change your filters and dyno run in the winter but I doubt anything higher than that. __________________ https://www.youtube.com/watch?v=RtvG...data_playerARK HFC'S-ARK Grip-Stillen G3-M370-UPREV-Kinetix upper control arm-WC Latheworks-Stage2 Bad@$$ Driver(318whp/268tq)-

08-19-2013, 12:48 PM	#12 (permalink)
mag_black A True Z Fanatic Join Date: Mar 2013 Location: Massachusetts Posts: 1,400 Drives: 09 370Z MT6 Rep Power: 666	The 2nd dyno sheet I added only has numbers from cbe/intake/tp, cbe/intake and cbe/intake. I should have the other files today to see what the tuning is actually doing. If you look at sheet 1 and then sheet 2, you'll see that two of the sheet 1 runs made it on to sheet 2. I have no idea what the tuning is doing because it's not sheet 2 at all, and the best numbers of the day are on sheet 2 which is only cbe/intake/tp. That's why I'm really not happy. Any runs after "runfile_22.drf" (304/248) on sheet 2 didn't make anymore peak hp/tq. __________________ fujimura ≠ abbeyRoadCompany ≠ fastIntentions ≠ motordyne ≠ avantGarde ≠ ecutek ≠ nismo ≠ stillen ≠ stoptech ≠ gtm ≠ spl ≠ carbonfiberelement ≠ stance™ Last edited by mag_black; 08-19-2013 at 12:51 PM.

08-19-2013, 01:22 PM	#13 (permalink)
roy'sz A True Z Fanatic Join Date: Aug 2011 Location: palmdale, ca Posts: 1,299 Drives: 2010 nissan 370z Rep Power: 15	Just curious....what gear were you doing pulls in? Also what was the time between pulls? __________________ https://www.youtube.com/watch?v=RtvG...data_playerARK HFC'S-ARK Grip-Stillen G3-M370-UPREV-Kinetix upper control arm-WC Latheworks-Stage2 Bad@$$ Driver(318whp/268tq)-

08-19-2013, 01:57 PM	#14 (permalink)
mag_black A True Z Fanatic Join Date: Mar 2013 Location: Massachusetts Posts: 1,400 Drives: 09 370Z MT6 Rep Power: 666	4th and he would do 3 - 5 pulls. He let it rest probably about 2 - 3 times w/ about 10- 15 mins w/ fans on it. I have to look at my videos to confirm, but that seems about right. When we talked about what was done. They only thing that was mentioned was corrected A/F and adding timing. IDK if I got the full explanation or not. __________________ fujimura ≠ abbeyRoadCompany ≠ fastIntentions ≠ motordyne ≠ avantGarde ≠ ecutek ≠ nismo ≠ stillen ≠ stoptech ≠ gtm ≠ spl ≠ carbonfiberelement ≠ stance™

08-19-2013, 03:42 PM	#15 (permalink)
roy'sz A True Z Fanatic Join Date: Aug 2011 Location: palmdale, ca Posts: 1,299 Drives: 2010 nissan 370z Rep Power: 15	Having the right a to f makes all the difference. The reason you didnt see the numbers you wanted was because it wasn't a direct drive dyno....meanimg he meeded to do 5th gear pull. 5th has a 1:1 ratio where 4th is 1.something to 1. With as warm as it was you should be close to my numbers. __________________ https://www.youtube.com/watch?v=RtvG...data_playerARK HFC'S-ARK Grip-Stillen G3-M370-UPREV-Kinetix upper control arm-WC Latheworks-Stage2 Bad@$$ Driver(318whp/268tq)-

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Uprev tuned, but still CEL	SnooPPP	Tuning	8	10-08-2012 01:09 PM
Uprev e-tune vs dyno tuning with uprev??	babbagandu	Tuning	6	05-07-2012 10:53 PM
Wicked CAS Open House / GRANITE STATE DYNO & TUNE GRAND OPENING	Wicked CAS	North East Region	2	05-03-2012 08:31 AM
UpRev tuned!	conor1123	Tuning	35	04-23-2012 12:41 PM
UpRev tuned my car	kevin1985912	Tuning	6	08-02-2010 12:33 AM