UpRev tuned @ Granite State Dyno 8/17

mag_black · 08-19-2013, 06:40 PM

Problem w/ 5th is I need to exceed 155 mph which hit's governor. That would've made all my other runs in 4th w/o tune kind of useless or would've made all my runs w/o a tune, short.

I think you're right though. Next time I go, I'll run in 5th and then tune it from there.

Did you run in 5th or 4th? I totally forgot, but I wanted to remind myself to have him run it once in 5th.

roy'sz · 08-19-2013, 08:14 PM

I had my governor takenn off my car. 5th gear is direct drive. Also what type of dyno was it? Name bramd?

mag_black · 08-19-2013, 08:59 PM

DynoJet 224X 2wd dyno. I should have files by tomorrow, tuner is real nice guy and is busy. It'll be nice to see power under the curve. I can definitely feel it; I drove my car and then drove Forza370z's nismo on a closed road and could feel my low - mid stand out more. It revs easier and quicker.

I will say it again; I'm happy w/ city driving. I'm just bothered by peak hp/tq.

roy'sz · 08-19-2013, 09:47 PM

I think you cant exceed a certain speed on the dyno. According to your previous post...in 4th you couldnt hit your target speed of 155mph. I think you accidently got it twisted. On the dynojet I was on I couldnt exceed 163.

If you want more midrange you should consider the motordyne manifold. The runners in it are a little longer creating more midrange power. We habe a similar setup so I can attest that I love the way my car performs.

Just remember, the only reason why your car read lower was because of the gear. Also possibly temp. Just curious though what was your targeted hp?

mag_black · 08-20-2013, 12:10 AM

315/255 and i would've been happy.

I should've done more research. I'm finding things I want to change/add to my tune (mainly fan control).

ANMVQ · 08-20-2013, 05:58 AM

5th?? I thought it should be 4th.. I know autos are different but mine is always in 4th.
Not sure about the type of dyno but I know on the mustangs(low) I made 298 WHP and 230WTRQ back when I did my tune with just I:E. But your numbers dont look that bad.

roy'sz · 08-20-2013, 06:48 AM

Below are listed the gear ratios and final drive ratios of the 370Z's manual transmission:

Gear Ratios (Manual)

1st 3.794

2nd 2.324
3rd 1.624
4th 1.271
5th 1.000
6th 0.794
Reverse 3.446
Final Drive 3.692

This should help explain what I said. If you dyno in 5th you get the direct drive power being put to the wheels instead of it being multipled down.

fxroar · 08-20-2013, 08:24 AM

Most of the tuners I know tune in 4th but make final runs on 5th 1:1 ratio. You should have broken your target whp/trq easily with your setup.

Sh0velMan · 08-20-2013, 08:49 AM

Quote:

Originally Posted by fxroar

Most of the tuners I know tune in 4th but make final runs on 5th 1:1 ratio. You should have broken your target whp/trq easily with your setup.

Most people posting dyno sheets with ~270+ Ft Lbs torque numbers N/A are dynoing in 4th gear.

Multiply the torque numbers by 0.787 and you'll have the "real" wheel torque number.

This doesn't necessarily apply to Dynojets... the way they measure torque seems to be very different than other dynos, I myself have sheets showing torque in the 260's and I know they were done in 5th, then I have sheets from the next day on a Mustang with power very close and the torque in the 230's.

mag_black · 08-20-2013, 04:02 PM

So which dyno is considered the most reliable? I always thought it was a dynojet.

roy'sz · 08-20-2013, 05:30 PM

It is.

mag_black · 08-21-2013, 09:38 AM

Still waiting on dyno files. I'm going to bug him again for it.

mag_black · 08-22-2013, 04:17 PM

I actually have a few good runs that made 306-308. The power curve on 306 shows the best in terms of performance gain, so I used that and posted it.

08-19-2013, 06:40 PM	#16 (permalink)
mag_black A True Z Fanatic Join Date: Mar 2013 Location: Massachusetts Posts: 1,400 Drives: 09 370Z MT6 Rep Power: 666	Problem w/ 5th is I need to exceed 155 mph which hit's governor. That would've made all my other runs in 4th w/o tune kind of useless or would've made all my runs w/o a tune, short. I think you're right though. Next time I go, I'll run in 5th and then tune it from there. Did you run in 5th or 4th? I totally forgot, but I wanted to remind myself to have him run it once in 5th. __________________ fujimura ≠ abbeyRoadCompany ≠ fastIntentions ≠ motordyne ≠ avantGarde ≠ ecutek ≠ nismo ≠ stillen ≠ stoptech ≠ gtm ≠ spl ≠ carbonfiberelement ≠ stance™ Last edited by mag_black; 08-19-2013 at 06:43 PM. Reason: typo

08-19-2013, 08:14 PM	#17 (permalink)
roy'sz A True Z Fanatic Join Date: Aug 2011 Location: palmdale, ca Posts: 1,299 Drives: 2010 nissan 370z Rep Power: 15	I had my governor takenn off my car. 5th gear is direct drive. Also what type of dyno was it? Name bramd? __________________ https://www.youtube.com/watch?v=RtvG...data_playerARK HFC'S-ARK Grip-Stillen G3-M370-UPREV-Kinetix upper control arm-WC Latheworks-Stage2 Bad@$$ Driver(318whp/268tq)-

08-19-2013, 08:59 PM	#18 (permalink)
mag_black A True Z Fanatic Join Date: Mar 2013 Location: Massachusetts Posts: 1,400 Drives: 09 370Z MT6 Rep Power: 666	DynoJet 224X 2wd dyno. I should have files by tomorrow, tuner is real nice guy and is busy. It'll be nice to see power under the curve. I can definitely feel it; I drove my car and then drove Forza370z's nismo on a closed road and could feel my low - mid stand out more. It revs easier and quicker. I will say it again; I'm happy w/ city driving. I'm just bothered by peak hp/tq. __________________ fujimura ≠ abbeyRoadCompany ≠ fastIntentions ≠ motordyne ≠ avantGarde ≠ ecutek ≠ nismo ≠ stillen ≠ stoptech ≠ gtm ≠ spl ≠ carbonfiberelement ≠ stance™

08-19-2013, 09:47 PM	#19 (permalink)
roy'sz A True Z Fanatic Join Date: Aug 2011 Location: palmdale, ca Posts: 1,299 Drives: 2010 nissan 370z Rep Power: 15	I think you cant exceed a certain speed on the dyno. According to your previous post...in 4th you couldnt hit your target speed of 155mph. I think you accidently got it twisted. On the dynojet I was on I couldnt exceed 163. If you want more midrange you should consider the motordyne manifold. The runners in it are a little longer creating more midrange power. We habe a similar setup so I can attest that I love the way my car performs. Just remember, the only reason why your car read lower was because of the gear. Also possibly temp. Just curious though what was your targeted hp? __________________ https://www.youtube.com/watch?v=RtvG...data_playerARK HFC'S-ARK Grip-Stillen G3-M370-UPREV-Kinetix upper control arm-WC Latheworks-Stage2 Bad@$$ Driver(318whp/268tq)-

08-20-2013, 12:10 AM	#20 (permalink)
mag_black A True Z Fanatic Join Date: Mar 2013 Location: Massachusetts Posts: 1,400 Drives: 09 370Z MT6 Rep Power: 666	315/255 and i would've been happy. I should've done more research. I'm finding things I want to change/add to my tune (mainly fan control). __________________ fujimura ≠ abbeyRoadCompany ≠ fastIntentions ≠ motordyne ≠ avantGarde ≠ ecutek ≠ nismo ≠ stillen ≠ stoptech ≠ gtm ≠ spl ≠ carbonfiberelement ≠ stance™ Last edited by mag_black; 08-20-2013 at 12:12 AM.

08-20-2013, 05:58 AM	#21 (permalink)
ANMVQ A True Z Fanatic Join Date: Mar 2011 Location: Framingham MA Posts: 2,732 Drives: 2014 Q50 AWD Rep Power: 19	5th?? I thought it should be 4th.. I know autos are different but mine is always in 4th. Not sure about the type of dyno but I know on the mustangs(low) I made 298 WHP and 230WTRQ back when I did my tune with just I:E. But your numbers dont look that bad. __________________ 14 Q50 AWD, ARK, ECUTEK (SEB), Takda,

08-20-2013, 06:48 AM	#22 (permalink)
roy'sz A True Z Fanatic Join Date: Aug 2011 Location: palmdale, ca Posts: 1,299 Drives: 2010 nissan 370z Rep Power: 15	Below are listed the gear ratios and final drive ratios of the 370Z's manual transmission: Gear Ratios (Manual) 1st 3.794 2nd 2.324 3rd 1.624 4th 1.271 5th 1.000 6th 0.794 Reverse 3.446 Final Drive 3.692 This should help explain what I said. If you dyno in 5th you get the direct drive power being put to the wheels instead of it being multipled down. __________________ https://www.youtube.com/watch?v=RtvG...data_playerARK HFC'S-ARK Grip-Stillen G3-M370-UPREV-Kinetix upper control arm-WC Latheworks-Stage2 Bad@$$ Driver(318whp/268tq)-

08-20-2013, 08:24 AM	#23 (permalink)
fxroar Track Member Join Date: Oct 2009 Location: San Diego, CA Posts: 525 Drives: '10 40th Anniversary Rep Power: 16	Most of the tuners I know tune in 4th but make final runs on 5th 1:1 ratio. You should have broken your target whp/trq easily with your setup. __________________ Fast Intentions / K&N / Blox / Evo-R / Uprev / Forgestar 19" F14 / R40 / NST / Z1 / SDCE / H&R / Kenwood / ISS Forged 20" FM10R

08-20-2013, 04:02 PM	#25 (permalink)
mag_black A True Z Fanatic Join Date: Mar 2013 Location: Massachusetts Posts: 1,400 Drives: 09 370Z MT6 Rep Power: 666	So which dyno is considered the most reliable? I always thought it was a dynojet. __________________ fujimura ≠ abbeyRoadCompany ≠ fastIntentions ≠ motordyne ≠ avantGarde ≠ ecutek ≠ nismo ≠ stillen ≠ stoptech ≠ gtm ≠ spl ≠ carbonfiberelement ≠ stance™

08-20-2013, 05:30 PM	#26 (permalink)
roy'sz A True Z Fanatic Join Date: Aug 2011 Location: palmdale, ca Posts: 1,299 Drives: 2010 nissan 370z Rep Power: 15	It is. __________________ https://www.youtube.com/watch?v=RtvG...data_playerARK HFC'S-ARK Grip-Stillen G3-M370-UPREV-Kinetix upper control arm-WC Latheworks-Stage2 Bad@$$ Driver(318whp/268tq)-

08-21-2013, 09:38 AM	#27 (permalink)
mag_black A True Z Fanatic Join Date: Mar 2013 Location: Massachusetts Posts: 1,400 Drives: 09 370Z MT6 Rep Power: 666	Still waiting on dyno files. I'm going to bug him again for it. __________________ fujimura ≠ abbeyRoadCompany ≠ fastIntentions ≠ motordyne ≠ avantGarde ≠ ecutek ≠ nismo ≠ stillen ≠ stoptech ≠ gtm ≠ spl ≠ carbonfiberelement ≠ stance™

08-22-2013, 04:17 PM	#28 (permalink)
mag_black A True Z Fanatic Join Date: Mar 2013 Location: Massachusetts Posts: 1,400 Drives: 09 370Z MT6 Rep Power: 666	I actually have a few good runs that made 306-308. The power curve on 306 shows the best in terms of performance gain, so I used that and posted it. __________________ fujimura ≠ abbeyRoadCompany ≠ fastIntentions ≠ motordyne ≠ avantGarde ≠ ecutek ≠ nismo ≠ stillen ≠ stoptech ≠ gtm ≠ spl ≠ carbonfiberelement ≠ stance™

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Uprev tuned, but still CEL	SnooPPP	Tuning	8	10-08-2012 01:09 PM
Uprev e-tune vs dyno tuning with uprev??	babbagandu	Tuning	6	05-07-2012 10:53 PM
Wicked CAS Open House / GRANITE STATE DYNO & TUNE GRAND OPENING	Wicked CAS	North East Region	2	05-03-2012 08:31 AM
UpRev tuned!	conor1123	Tuning	35	04-23-2012 12:41 PM
UpRev tuned my car	kevin1985912	Tuning	6	08-02-2010 12:33 AM