Mine's Motorsport VX-Rom vs Osiris vs any other ECU reflash

Mines 370z · 06-19-2013, 12:48 PM

Quote:

Originally Posted by JARblue

You're exactly right

If you're going to get on a track with this car, the stock pads and stock brake fluid are not adequate. Replacing both of them is absolutely necessary. Also, a Z with no oil cooler or only the stock oil cooler is probably going to need an aftermarket oil cooler for sustained track use.

I know right..I did see a few oil coolers out there that look promising. Z1 one's sells a few of them, with various sizes. It would depend on how hard you run the Z on the track or where you live in reference to temperature.

Chuck33079 · 06-19-2013, 12:50 PM

You're in Atlanta. Buy a 34 row oil cooler whether you plan on tracking the car or not.

Mines 370z · 06-19-2013, 01:13 PM

Quote:

Originally Posted by Chuck33079

You're in Atlanta. Buy a 34 row oil cooler whether you plan on tracking the car or not.

You think so? I know the large the row the more oil it can cool at any given time. You don't think it's a bit much?

Chuck33079 · 06-19-2013, 01:19 PM

It's a hell of a lot easier to make a plate to block off part of the cooler in winter than it is to add cooling capacity in the summer. And I don't think I've really heard of too many Zs running too cool. You're in the south, it gets hot in the summer and not too cold in the winter.

Sh0velMan · 06-19-2013, 01:21 PM

Quote:

Originally Posted by Chuck33079

It's a hell of a lot easier to make a plate to block off part of the cooler in winter than it is to add cooling capacity in the summer. And I don't think I've really heard of too many Zs running too cool. You're in the south, it gets hot in the summer and not too cold in the winter.

Plus if you have a thermostatic sandwich plate, it would have to be pretty damned cold outside for you to have issues with the oil not getting warm enough since most of them only flow 5% or less when 'closed'.

JARblue · 06-19-2013, 01:22 PM

Quote:

Originally Posted by Chuck33079

It's a hell of a lot easier to make a plate to block off part of the cooler in winter than it is to add cooling capacity in the summer. And I don't think I've really heard of too many Zs running too cool. You're in the south, it gets hot in the summer and not too cold in the winter.

Yeah, I hit 220F oil temps in the winter in Texas without even trying. I probably wouldn't even need a block off plate.

Mines 370z · 06-19-2013, 01:27 PM

Quote:

Originally Posted by Chuck33079

It's a hell of a lot easier to make a plate to block off part of the cooler in winter than it is to add cooling capacity in the summer. And I don't think I've really heard of too many Zs running too cool. You're in the south, it gets hot in the summer and not too cold in the winter.

Ok I gotcha...since we are on the oil cooler, what are your thoughts on the oil pan spacer. I heard the clearance is an issue for lowered cars.

Chuck33079 · 06-19-2013, 01:32 PM

I'd never make the oil pan the lowest part of the car. The cooler wil add a quart or so of capacity. That'll be fine.

Mines 370z · 06-19-2013, 01:44 PM

Quote:

Originally Posted by Chuck33079

I'd never make the oil pan the lowest part of the car. The cooler wil add a quart or so of capacity. That'll be fine.

Gotcha!

Sh0velMan · 06-19-2013, 01:45 PM

Quote:

Originally Posted by Chuck33079

I'd never make the oil pan the lowest part of the car. The cooler wil add a quart or so of capacity. That'll be fine.

Chuck33079 · 06-19-2013, 01:47 PM

If after the oil cooler is installed and the fan settings adjusted through your choice of software you're still seeing high oil temps, then I'd look at the oil pan GTM sells with their new MHI turbo kit. They sell it by itself and it adds quite a bit of capacity. I seriously doubt you'll need it unless your car sees a lot of track time. Realistically, with a cooler you'll be fine.

06-19-2013, 12:50 PM	#62 (permalink)
Chuck33079 A True Z Fanatic Join Date: Nov 2011 Location: Houston Posts: 12,265 Drives: 2011 370ztt Rep Power: 29538	You're in Atlanta. Buy a 34 row oil cooler whether you plan on tracking the car or not. __________________ 2011 MB Touring-Sport-6sp-Nav/GTM TT/FI TT TDX/JTran/Kosmic/Eibach/Hotchkis/SPC/CSF/RPS/SoThatsWhereAllMyMoneyWent

06-19-2013, 01:19 PM	#64 (permalink)
Chuck33079 A True Z Fanatic Join Date: Nov 2011 Location: Houston Posts: 12,265 Drives: 2011 370ztt Rep Power: 29538	It's a hell of a lot easier to make a plate to block off part of the cooler in winter than it is to add cooling capacity in the summer. And I don't think I've really heard of too many Zs running too cool. You're in the south, it gets hot in the summer and not too cold in the winter. __________________ 2011 MB Touring-Sport-6sp-Nav/GTM TT/FI TT TDX/JTran/Kosmic/Eibach/Hotchkis/SPC/CSF/RPS/SoThatsWhereAllMyMoneyWent

06-19-2013, 01:32 PM	#68 (permalink)
Chuck33079 A True Z Fanatic Join Date: Nov 2011 Location: Houston Posts: 12,265 Drives: 2011 370ztt Rep Power: 29538	I'd never make the oil pan the lowest part of the car. The cooler wil add a quart or so of capacity. That'll be fine. Mines 370z likes this. __________________ 2011 MB Touring-Sport-6sp-Nav/GTM TT/FI TT TDX/JTran/Kosmic/Eibach/Hotchkis/SPC/CSF/RPS/SoThatsWhereAllMyMoneyWent

06-19-2013, 01:47 PM	#71 (permalink)
Chuck33079 A True Z Fanatic Join Date: Nov 2011 Location: Houston Posts: 12,265 Drives: 2011 370ztt Rep Power: 29538	If after the oil cooler is installed and the fan settings adjusted through your choice of software you're still seeing high oil temps, then I'd look at the oil pan GTM sells with their new MHI turbo kit. They sell it by itself and it adds quite a bit of capacity. I seriously doubt you'll need it unless your car sees a lot of track time. Realistically, with a cooler you'll be fine. __________________ 2011 MB Touring-Sport-6sp-Nav/GTM TT/FI TT TDX/JTran/Kosmic/Eibach/Hotchkis/SPC/CSF/RPS/SoThatsWhereAllMyMoneyWent

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
FREE SHIPPING on UpRev Cipher Cables, Osiris Standard, Osiris Tuner & GT MAF's!	R/T Tuning	Drivetrain/Engine	0	01-16-2013 11:28 AM
UpRev or a Reflash?	Unique_Z	Tuning	22	06-20-2012 07:58 PM
If i reset my ecu, do i have to reflash uprev	EVOHUNTER	Forced Induction	7	06-12-2012 12:47 PM
Osiris reflash with Z1 Motorsports dyno tuning	John@Z1	Engine & Drivetrain	18	10-28-2009 05:15 PM
ReFlash yet???	ErnieT	Intake/Exhaust	4	07-18-2009 06:20 PM