UpRev full tuning capabitliy??

red6spd · 07-28-2010, 09:24 PM

I want Launch Control

Diocletian · 07-29-2010, 03:39 PM

I want Drift Hero mode for my 7AT, just set the limiter to 7500 and let me bounce off it lol.

It almost works for Valet Mode but it only goes to 4500RPM.

1slow370 · 08-01-2010, 06:12 AM

u know has anyone looked at the price on a set of new cylinder heads for our car? I don't know who is ripping uprev off but each full head assembly on courtesy parts is $500. replacing the ENTIRE motor and i mean everything might cost you $10K I smell bs stop nagging us excuse because if nissan can sell a whole car with a waiver to net press a few buttons i think that uprev could at least do a pro tuner release to their supposed "certified" shops that know what they are doing. And you can't shuck off the fact that sales would go up just by letting ur customer know that it can be done. Until they at least demonstrate that they can do it i'm going with they only partially cracked it and don't have a driveable version of the software and just don't want to pour anymore resources into it.

JB-370z · 08-01-2010, 08:24 AM

Yeah but what happens when a guy like me wants to take his car to the next level and lower the compression and up the boost with new internals???

Jordo! · 08-01-2010, 01:20 PM

I don't understand all the concern...

The valves have a range of mechancial adjustment and they should be tunable within that range. While the settings may be optimal N/A, there's just no way they could be optimal FI.

I seriously doubt you can adjust it to a range where mechanical damage to the valves or cams could result -- at worst it would result in changes that affect cylinder filling, which could result in detonation or suboptimal power, but that's the case when you adjust any engine parameter.

Sooner or later, someone like Power Enterprise will come up with something... either that or we're not getting the whole story. It just seems silly to disregard the adjustment of adjustable valve timing

JB-370z · 08-01-2010, 02:13 PM

All I know; is someone needs to get on it!! ASAP

1slow370 · 08-01-2010, 03:39 PM

no see the thing is that the vvel is actually the trottle control on our motors so it actually is fairly complex when you push the gas down the valves open farther. under normal cruising conditions the throttlebodies are wide open.

Jordo! · 08-02-2010, 05:10 PM

Quote:

Originally Posted by 1slow370

no see the thing is that the vvel is actually the trottle control on our motors so it actually is fairly complex when you push the gas down the valves open farther. under normal cruising conditions the throttlebodies are wide open.

Are you telling me we don't have traditonal throttle blades (albeit, operated by a motor)?

A buddy of mine had asked about that... hmm.

Well, that makes me wonder how TPS vs. VVEL settings are interpolated...

Damn it -- I want to see the maps

EDIT: Okay, we do have a throttle blade, but it's usually open -- huh.

So engine speed is controlled mainly by VVEL. Well, then all we need is a "simple" controller that can advance and retard everything by 1 degree increments, which only operates in open loop at WOT.

No need to mess with low speed tuning -- a lot of that would be off boost or low boost anyway.

JB-370z · 08-02-2010, 05:20 PM

Sound like someone should get a job at up-rev!

Jordo! · 08-02-2010, 05:57 PM

Quote:

Originally Posted by JB-370z

Sound like someone should get a job at up-rev!

Heh. I think I'll just try and patiently wait for someone to develop a reasonably user-friendly controller.

It sounds like the major problem is that no one has cracked the VVEL ECU in order to experiment with it... someone will either do that or figure out a way to spoof signals with a piggy back... the latter approach might just be easier.

1slow370 · 08-04-2010, 03:58 AM

no see the problem with open throttle blades means you cannot hook a positive displacement supercharger to the car. your only options are turbo and centrifugal (hence stillen using a vortech) I have my own way around this particular problem but i would like to not have to install a separate electronic box and another set of throttle bodies.

Edit: is not being able to sue the most efficient form of supercharger made good enough reason for uprev to release this or not? who in there right mind is going to make a kit that is impossible to rune without having the software to back it up?

G37Sam · 08-04-2010, 05:19 AM

Thing is, UpRev can control ECU parameters directly, but the VVEL has it's own controller I believe, can that be accessed from the OBD2 port? And would getting more lift be as simple as editing a number in some table somewhere? Or would the mechanical capabilities of the VVEL restrict that?

God I hate how this VVEL is a black box that we just have to live with

Jordo! · 08-04-2010, 06:08 AM

Quote:

Originally Posted by 1slow370

no see the problem with open throttle blades means you cannot hook a positive displacement supercharger to the car. your only options are turbo and centrifugal (hence stillen using a vortech) I have my own way around this particular problem but i would like to not have to install a separate electronic box and another set of throttle bodies.

Edit: is not being able to sue the most efficient form of supercharger made good enough reason for uprev to release this or not? who in there right mind is going to make a kit that is impossible to rune without having the software to back it up?

Why can't you have a positive displacement blower? Is the problem constant pressure? Couldn't you just use a bypass or clutch type engagement?

Anway, the stock VVEL settings are probably more forgiving for any blower than a turbine anyway -- blowers aren't built in exhaust restrictions.

Quote:

Originally Posted by G37Sam

Thing is, UpRev can control ECU parameters directly, but the VVEL has it's own controller I believe, can that be accessed from the OBD2 port? And would getting more lift be as simple as editing a number in some table somewhere? Or would the mechanical capabilities of the VVEL restrict that?

God I hate how this VVEL is a black box that we just have to live with

I have read this elsewhere.

For the electronics savvy, the simplest way is probably to figure out what voltages various VVEL sensors are looking for to vary lift and valve timing and then just condition those signals by splicing into the ECU wires. Thus, no tuning code would be needed, and in theory, the ECU would "think" it's operating as normal. That's essentially how piggyback VVTi and VVTLi controllers like the Camcon and V-manage work.

So... the million dollar question is: Does anyone have the VVEL ECU wiring diagram, the schematics for the VVEL sensors, or know anything about their operation, voltages, resistance, etc?

1slow370 · 08-05-2010, 03:04 AM

all the info you want is in the fsm download it and get reading. and yeah the blower would be pushing full cfm's all the time with no throttlebodies to restrict the inlet. and clutches are real gay you might as well just have nitrous or turbo's if you going to throw out the throttle characteristics of a true positive displacement setup.

Jordo! · 08-05-2010, 05:48 AM

Quote:

Originally Posted by 1slow370

all the info you want is in the fsm download it and get reading. .

Cool, I'll check it out -- thanks

Quote:

Originally Posted by 1slow370

and yeah the blower would be pushing full cfm's all the time with no throttlebodies to restrict the inlet. and clutches are real gay you might as well just have nitrous or turbo's if you going to throw out the throttle characteristics of a true positive displacement setup.

Ha ha ha -- well, I don't know if it would be quite that bad. You'd just need a decent TPS switch to have it come on at say, 2/3 throttle. That's how the old Blitz kit was set up for the 7th gen Celica, and it worked fine.

Although, it might be okay even with a properly set up bypass valve, which all modern PD SC's have now anyway.

It should still make boost ealier and have better throttle response than a centrifugal blower or turbo.

07-28-2010, 09:24 PM	#16 (permalink)
red6spd A True Z Fanatic Join Date: Apr 2010 Location: Long Island NY Posts: 3,277 Drives: 2010 Z Coupe M6 SPT Rep Power: 21	I want Launch Control __________________ 2010 Base+Sport 6spd: Stillen G3, FI Non-Resonated CBE, FI Non-Resonated Test Pipes, UpRev Tuned, Custom 24R Oil Cooler, JDM Rear Fog-OEM Harness. ???Whp ???WTQ (Will find out come spring time)

07-29-2010, 03:39 PM	#17 (permalink)
Diocletian Enthusiast Member Join Date: Mar 2010 Location: Orlando, Fl Posts: 350 Drives: 09 370z CY A7 Rep Power: 15	I want Drift Hero mode for my 7AT, just set the limiter to 7500 and let me bounce off it lol. It almost works for Valet Mode but it only goes to 4500RPM. __________________ Injen Dual CAI \| Illuminated Kick plates \| Stillen Sway bar kit \| F.I TDX w/ 12" Resonators \| F.I HFC's \| UpRev Tune \| 300HP/225tq Mustang Dyno

08-01-2010, 06:12 AM	#18 (permalink)
1slow370 A True Z Fanatic Join Date: Aug 2009 Location: In the D Posts: 3,732 Drives: v8 74 260z ;) Rep Power: 7250	u know has anyone looked at the price on a set of new cylinder heads for our car? I don't know who is ripping uprev off but each full head assembly on courtesy parts is $500. replacing the ENTIRE motor and i mean everything might cost you $10K I smell bs stop nagging us excuse because if nissan can sell a whole car with a waiver to net press a few buttons i think that uprev could at least do a pro tuner release to their supposed "certified" shops that know what they are doing. And you can't shuck off the fact that sales would go up just by letting ur customer know that it can be done. Until they at least demonstrate that they can do it i'm going with they only partially cracked it and don't have a driveable version of the software and just don't want to pour anymore resources into it. __________________ ANSWER PRICE LIST Answers - - - - - - - - - - - - - - - - $0.75 Answers (requiring thought) - - - - $1.25 Answers (correct) - - - - - - - - - - $12.50

08-01-2010, 08:24 AM	#19 (permalink)
JB-370z A True Z Fanatic Join Date: Apr 2009 Location: Houston, Tx Posts: 1,859 Drives: Stage 2 Twin Turbos Rep Power: 19	Yeah but what happens when a guy like me wants to take his car to the next level and lower the compression and up the boost with new internals??? __________________ ll Baker Tuning ll GTM ll Powerhouse Amuse ll HKS ll Up-Rev ll iForged ll AP Racing ll Pioneer ll SPL ll Bride ll Top Secret ll OS Giken ll GTM Stage 2 Twin Turboed 370z (First in Texas, Thanks To Baker Tuning)

08-01-2010, 01:20 PM	#20 (permalink)
Jordo! A True Z Fanatic Join Date: May 2010 Location: nirvana Posts: 6,394 Drives: 2023 NATM Rep Power: 417	I don't understand all the concern... The valves have a range of mechancial adjustment and they should be tunable within that range. While the settings may be optimal N/A, there's just no way they could be optimal FI. I seriously doubt you can adjust it to a range where mechanical damage to the valves or cams could result -- at worst it would result in changes that affect cylinder filling, which could result in detonation or suboptimal power, but that's the case when you adjust any engine parameter. Sooner or later, someone like Power Enterprise will come up with something... either that or we're not getting the whole story. It just seems silly to disregard the adjustment of adjustable valve timing __________________ Enjoy it. Destroy it. Last edited by Jordo!; 08-01-2010 at 01:29 PM.

08-01-2010, 02:13 PM	#21 (permalink)
JB-370z A True Z Fanatic Join Date: Apr 2009 Location: Houston, Tx Posts: 1,859 Drives: Stage 2 Twin Turbos Rep Power: 19	All I know; is someone needs to get on it!! ASAP __________________ ll Baker Tuning ll GTM ll Powerhouse Amuse ll HKS ll Up-Rev ll iForged ll AP Racing ll Pioneer ll SPL ll Bride ll Top Secret ll OS Giken ll GTM Stage 2 Twin Turboed 370z (First in Texas, Thanks To Baker Tuning)

08-01-2010, 03:39 PM	#22 (permalink)
1slow370 A True Z Fanatic Join Date: Aug 2009 Location: In the D Posts: 3,732 Drives: v8 74 260z ;) Rep Power: 7250	no see the thing is that the vvel is actually the trottle control on our motors so it actually is fairly complex when you push the gas down the valves open farther. under normal cruising conditions the throttlebodies are wide open. __________________ ANSWER PRICE LIST Answers - - - - - - - - - - - - - - - - $0.75 Answers (requiring thought) - - - - $1.25 Answers (correct) - - - - - - - - - - $12.50

08-02-2010, 05:20 PM	#24 (permalink)
JB-370z A True Z Fanatic Join Date: Apr 2009 Location: Houston, Tx Posts: 1,859 Drives: Stage 2 Twin Turbos Rep Power: 19	Sound like someone should get a job at up-rev! __________________ ll Baker Tuning ll GTM ll Powerhouse Amuse ll HKS ll Up-Rev ll iForged ll AP Racing ll Pioneer ll SPL ll Bride ll Top Secret ll OS Giken ll GTM Stage 2 Twin Turboed 370z (First in Texas, Thanks To Baker Tuning)

08-04-2010, 03:58 AM	#26 (permalink)
1slow370 A True Z Fanatic Join Date: Aug 2009 Location: In the D Posts: 3,732 Drives: v8 74 260z ;) Rep Power: 7250	no see the problem with open throttle blades means you cannot hook a positive displacement supercharger to the car. your only options are turbo and centrifugal (hence stillen using a vortech) I have my own way around this particular problem but i would like to not have to install a separate electronic box and another set of throttle bodies. Edit: is not being able to sue the most efficient form of supercharger made good enough reason for uprev to release this or not? who in there right mind is going to make a kit that is impossible to rune without having the software to back it up? __________________ ANSWER PRICE LIST Answers - - - - - - - - - - - - - - - - $0.75 Answers (requiring thought) - - - - $1.25 Answers (correct) - - - - - - - - - - $12.50 Last edited by 1slow370; 08-04-2010 at 04:06 AM.

08-04-2010, 05:19 AM	#27 (permalink)
G37Sam A True Z Fanatic Join Date: Dec 2008 Location: Dubai, UAE Posts: 1,507 Drives: RB'd G37 Rep Power: 20	Thing is, UpRev can control ECU parameters directly, but the VVEL has it's own controller I believe, can that be accessed from the OBD2 port? And would getting more lift be as simple as editing a number in some table somewhere? Or would the mechanical capabilities of the VVEL restrict that? God I hate how this VVEL is a black box that we just have to live with __________________ '14 Viper GTS '08 RB'd G37S - Sold

08-05-2010, 03:04 AM	#29 (permalink)
1slow370 A True Z Fanatic Join Date: Aug 2009 Location: In the D Posts: 3,732 Drives: v8 74 260z ;) Rep Power: 7250	all the info you want is in the fsm download it and get reading. and yeah the blower would be pushing full cfm's all the time with no throttlebodies to restrict the inlet. and clutches are real gay you might as well just have nitrous or turbo's if you going to throw out the throttle characteristics of a true positive displacement setup. __________________ ANSWER PRICE LIST Answers - - - - - - - - - - - - - - - - $0.75 Answers (requiring thought) - - - - $1.25 Answers (correct) - - - - - - - - - - $12.50

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Full Stillen Bolt Ons + Berk Cats and UpRev Tune Results...	chuckd05	Tuning	38	10-17-2013 03:19 PM
FS: UPREV Osiris Full Tuner Package!!!	NIZMOZ	Parts for sale (Private Classifieds)	3	08-29-2010 07:50 PM
UpRev E-Tune's?	flashburn	Tuning	17	08-03-2010 10:58 AM
Got my car tuned with UpRev	G37Sam	Tuning	116	05-01-2010 10:33 PM
At UpRev getting the 370 Tuned	caneman88	Nissan 370Z General Discussions	46	10-31-2009 05:35 PM