Think his name is Bill. A GTR tuner but I'm right where you're at now. Can be tuned but with none of the features. Might still pull the trigger as
|
|
LinkBack | Thread Tools | Display Modes |
01-07-2016, 01:39 PM | #16 (permalink) |
A True Z Fanatic
Join Date: Oct 2011
Location: Southwest FL
Posts: 1,374
Drives: G37S
Rep Power: 29 |
Think his name is Bill. A GTR tuner but I'm right where you're at now. Can be tuned but with none of the features. Might still pull the trigger as I believe 08 can still get the knock sensor and control timing. I currently have Uprev.
|
01-07-2016, 04:47 PM | #17 (permalink) |
Base Member
Join Date: Aug 2014
Location: Los Angeles, CA.
Posts: 193
Drives: 08 G37S S/C
Rep Power: 40 |
Well the statement that it CAN be tuned is more than I got before! This would still be a huge benefit for Stillen supercharged cars who want to run speed density. So it seems like there is SOME progress SOMEWHERE, even if it's quiet and slow... there might be a light at the end of the tunnel yet!
|
01-07-2016, 06:09 PM | #18 (permalink) | |
Base Member
Join Date: May 2015
Location: Atlanta
Posts: 126
Drives: 2008 G37S 6MT
Rep Power: 10 |
Quote:
I'm going to ask ecutek if they can manage to just program one or two features in instead of the whole thing, but I'm sure that'll cost way more than nominal pricing . After reading half the internet, I've found out two things: 1) haltech platinum pro series standalone is a good option, but that'll be a failsafe if I can't get this to work. 2) it MAY BE POSSIBLE to SWAP ECUs. After talking with Tommy (@tommyboykim on IG), it seems like I'll have to transplant the wiring harness along with the newer ecu. Meaning I have to get all the modules too. Anyone know where I can find a list of all the control modules so I know what to burn my money on? |
|
01-08-2016, 06:11 AM | #20 (permalink) | ||
Base Member
Join Date: May 2015
Location: Atlanta
Posts: 126
Drives: 2008 G37S 6MT
Rep Power: 10 |
Quote:
How To Use NICOclub.com I'm pulling the I/O signals from the 09 and 08 and comparing the two to see if I can just do a straight up swap with minimal modifications to my wiring harness...or if I'ma have to swap out the entire control system. Quote:
on another note, even if swapping the ECU /and wiring harness works, the car is still going to have to go to the dealership to have it reprogrammed with the VIN, NATS, and new key...everything else (all the ECU re-learning procedures) can be performed by owner. I'll have an update probably by the end of next week with a tentative grocery list of things to make this work. |
||
01-11-2016, 05:42 PM | #21 (permalink) |
Base Member
Join Date: May 2015
Location: Atlanta
Posts: 126
Drives: 2008 G37S 6MT
Rep Power: 10 |
I've found a few leads that I'm trying to follow up at the moment...I'm working out the signal input/output labels and signal strength to see if it can cross over signals effectively or even at all.
There have been a few ecu mods that I've come across, but nothing substantial. Just recently got back in touch w/Ecutek, they told me that their techs are gonna start looking at this. Happy at this point...seems like things are moving. |
01-19-2016, 06:20 AM | #22 (permalink) |
Base Member
Join Date: May 2015
Location: Atlanta
Posts: 126
Drives: 2008 G37S 6MT
Rep Power: 10 |
So I've gotten in contact with T. Sinclair and P. Blamire from Ecutek...they say they don't have any solutions, and I'm guessing they're not willing to dedicate any resources to solving it. I know I probably wouldn't in the larger aspect of things.
Still trying to signal match the 08/09 ECU input/output signals...haven't really been on the ball with that lately, pet got sick, nephew wanted to chill, etc. Hopefully no more distractions for now *knock on wood*. A guy I talk to down in Florida claims to have the full Ecutek working on his G. I had originally thought that he had a 2010 IPL, but I guess not. He messaged me last night saying he was going to get in touch with his tuner. If this is legit, then I'll be getting Ecutek this year definitely...I had found a hookup on getting UpRev for the low in the meantime till I had figured out this situation with Ecutek. So with that said, if this tuner turns out to be the genius my guy claims he is...and I'll definitely refer his name to everyone I come across, since I'm pretty sure he wouldn't want me divulging exactly HOW he can get Ecutek RaceROM to operate in its entirety on an 08 G37S. |
01-27-2016, 01:47 PM | #23 (permalink) |
Base Member
Join Date: May 2015
Location: Atlanta
Posts: 126
Drives: 2008 G37S 6MT
Rep Power: 10 |
*******UPDATE*******
got in touch with Tommy K. In florida, he has an 08 ipl w/ ecutek RaceROM. Find a like ecm, same transmission, it's a strait swap and reprogramming at the dealership (to reprogram NATS and the key) I'm super ecstatic about this, I'll be getting the ecm in the next week months or so (just bought upper ctrl arms, ported TBs, and am about to buy new injectors/fuel pump. I think the reason why J. Visconti's attempt didn't work is because the guy bought an ECM for a model w/ a different transmission. |
01-28-2016, 09:46 AM | #24 (permalink) | |
Premium Member
Join Date: May 2013
Location: St. Pete, FL
Posts: 3,848
Drives: 520whp Fire Breather
Rep Power: 86951 |
Awesome! I am looking forward to hearing your results.
__________________
2013 Gun Metallic Sport - Gamma V3 Twin Turbogized DIY Gamma V3 TT Install * Jayhovah's Gamma V3 TT Install Pic'Z and Vid'Z * DIY: Washer Reservoir for the Boosted Quote:
|
|
01-28-2016, 10:05 AM | #25 (permalink) | |
A True Z Fanatic
Join Date: Dec 2010
Location: Houston
Posts: 14,532
Drives: '10 G37 6MT
Rep Power: 2465056 |
Quote:
|
|
01-28-2016, 12:37 PM | #26 (permalink) | |
Base Member
Join Date: May 2015
Location: Atlanta
Posts: 126
Drives: 2008 G37S 6MT
Rep Power: 10 |
Quote:
I'll have to check, but I'm pretty sure he said 2008 w/ 2010 ipl ECM . 2008 G37S 6mt coupe + 2010 IPL ECM= 2008 IPL G37S Last edited by hooey_b; 01-28-2016 at 12:42 PM. Reason: Grammar nazi check |
|
02-01-2016, 05:40 AM | #30 (permalink) |
Base Member
Join Date: May 2015
Location: Atlanta
Posts: 126
Drives: 2008 G37S 6MT
Rep Power: 10 |
ok, so here's some more details I found out as of last night:
I talked to Tony of Autosports Engineering down in Florida, he's the one who has gotten it to work! so there are two different ways, depending on how much money you're willing to spend/blow: 1) obtain an ECM of like model and drivetrain, an 09 or 2010, and it's a straight swap out with a reprogramming of the NATS, BCM, and key to get it operational again. You'll need someone with knowledge of and access to the Nissan Consult Diagnostic tool to do the re-programming, or just go to the dealership. 2) if you get something from 2011 or later, you're going to need to swap out the ENTIRE WIRING HARNESS. I'll leave it at that lol. Big shout out to Tony (Autosports Engineering) for being the one to give the final solution to the problem w/ details, also shout out to Jon P of Z1, Nakia Bramwell, Tobin Sinclaire (Ecutek), and Mike Mixon (bullitt5897) for providing the knowledge/references to help the research. I just dropped $$$ on a bunch of other stuff thinking it would be a while before I found a way for this to work, so it'll be a min (few months) before I get any headway on this stage of the project. |
Bookmarks |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
ECUTEK - Everything | osbornsm | Tuning | 142 | 04-25-2019 01:35 PM |
ECUTEK from z1 | MicntaeG35 | Tuning | 11 | 12-30-2015 04:06 PM |
Just went ECUtek | Zipper1 | Tuning | 27 | 12-01-2015 02:50 PM |
I <3 EcuTek | avery370z | Tuning | 57 | 08-01-2015 11:45 AM |
EcuTek | ANMVQ | Tuning | 82 | 11-27-2013 10:40 PM |