0-60 times

kekermahoney · 08-13-2009, 11:17 PM

just curious to hear about other people's 0-60 times, both stock and after mods.. I get consistant 4.8-4.9's bone stock and i'm wondering what I could expect after some mods IE exhaust, CAI, etc...

davidyan · 08-14-2009, 12:09 AM

haven't tested it yet but was curious as to how you are measuring the 0-60 times. At the track? G-Tech Pro?

shabarivas · 08-14-2009, 12:11 AM

And how are you measuring that???

Z eliminator · 08-14-2009, 06:52 AM

Based on the 1/8 mile my 370z 7 AT sport did it 4.4 seconds 2.01 60ft times. (Stillen G3 intake and 4.08 gears. ) Stock air preasure in rear tires.

kekermahoney · 08-14-2009, 09:13 PM

Quote:

Originally Posted by Z eliminator

Based on the 1/8 mile my 370z 7 AT sport did it 4.4 seconds 2.01 60ft times. (Stillen G3 intake and 4.08 gears. ) Stock air preasure in rear tires.

I have a gtech.. 4.4.. nice! just the intake and taller gears? no exhaust mods?

frost · 08-14-2009, 09:19 PM

I won't bother to hit to the track until it gets under 90 degrees here at night. But I will keep you informed

Z eliminator · 08-14-2009, 10:40 PM

My berk cats and stillen exhaust are being installed this tuesday night.
Can not wait to see what it runs like

kekermahoney · 08-18-2009, 06:55 PM

Quote:

Originally Posted by Z eliminator

My berk cats and stillen exhaust are being installed this tuesday night.
Can not wait to see what it runs like

let us know how it works out for you!

jpit · 10-09-2009, 04:48 PM

I have a MT Touring with sport package and have added Berk HFCs and R2C intakes. Just ran 3 0-60 runs and the best was 5.169 recorded with laplogger. Car had about 1/2tank of gas and driver weighs about 180, temp was 60 degrees. I am happy with this result (equals about what a pro driver gets with a stock 370Z) and could probably break into the 4s but really don't want to take too many miles off the life of the clutch.

Zsteve · 10-31-2009, 11:16 AM

Just used my G Tech today and got 5.12 for my 0 - 60 time with a 2.2 60ft. Had the weight set for 3500 lbs for car, and driver. Tried it in "D" and using the paddles and of course got the better time with the paddles. I even stepped on the brake and got the rpms up to about 2K before launch. I would have thought Id do better but Im not sure how accurate the GTech is but I will use that as my base for when I get the FI CBE installed and then do another and see what gains I get from the CBE.

Matt · 10-31-2009, 07:39 PM

Quote:

Originally Posted by Zsteve

Just used my G Tech today and got 5.12 for my 0 - 60 time with a 2.2 60ft. Had the weight set for 3500 lbs for car, and driver. Tried it in "D" and using the paddles and of course got the better time with the paddles. I even stepped on the brake and got the rpms up to about 2K before launch. I would have thought Id do better but Im not sure how accurate the GTech is but I will use that as my base for when I get the FI CBE installed and then do another and see what gains I get from the CBE.

Zsteve · 10-31-2009, 09:22 PM

zoom zoom

m4a1mustang · 10-31-2009, 09:43 PM

Dude lol I totlaly installed like intake and exhaust in my z in forza 3 and totally get 4.8 0-60 but since mt says 4.7 i bet with the exhaust im like 4.5 since stock z in forza gets like 5.0 so that's a .2 gain, so like 4.7-.2 = 4.5, that's def prob acurate... man lol i smoke cameros like nobodies biz.

Matt · 11-03-2009, 11:01 AM

Are the manual/paddle shifter drivers pushing 0-60 in 2nd gear or shifting to 3rd? I've seen references to 2nd gear hitting redline at 62 mph, so I'm unsure if the small delay from shifting to 3rd is worth the time, or if hitting 60 in 2nd is worth the risk.

jpit · 11-04-2009, 12:38 AM

Are you guys getting any wheel hop with your launches?

08-13-2009, 11:17 PM	#1 (permalink)
kekermahoney Base Member Join Date: Jul 2009 Location: NJ Posts: 57 Drives: 370z sport 6spd Rep Power: 15	0-60 times just curious to hear about other people's 0-60 times, both stock and after mods.. I get consistant 4.8-4.9's bone stock and i'm wondering what I could expect after some mods IE exhaust, CAI, etc...

10-31-2009, 11:16 AM	#10 (permalink)
Zsteve A True Z Fanatic Join Date: Sep 2009 Location: TX Posts: 3,298 Drives: the 2 balled club Rep Power: 21	Just used my G Tech today and got 5.12 for my 0 - 60 time with a 2.2 60ft. Had the weight set for 3500 lbs for car, and driver. Tried it in "D" and using the paddles and of course got the better time with the paddles. I even stepped on the brake and got the rpms up to about 2K before launch. I would have thought Id do better but Im not sure how accurate the GTech is but I will use that as my base for when I get the FI CBE installed and then do another and see what gains I get from the CBE. __________________ 2010 LS3 C6 Silver coupe corvette

10-31-2009, 09:22 PM	#12 (permalink)
Zsteve A True Z Fanatic Join Date: Sep 2009 Location: TX Posts: 3,298 Drives: the 2 balled club Rep Power: 21	zoom zoom __________________ 2010 LS3 C6 Silver coupe corvette

10-31-2009, 09:43 PM	#13 (permalink)
m4a1mustang A True Z Fanatic Join Date: Feb 2009 Location: Northern VA Posts: 55,385 Drives: on two wheels Rep Power: 6962	Dude lol I totlaly installed like intake and exhaust in my z in forza 3 and totally get 4.8 0-60 but since mt says 4.7 i bet with the exhaust im like 4.5 since stock z in forza gets like 5.0 so that's a .2 gain, so like 4.7-.2 = 4.5, that's def prob acurate... man lol i smoke cameros like nobodies biz. __________________ - Steve Zs & Coffee - Saturdays at 10AM in Fairfax, VA and Columbia, MD (Click the banner!) LIKE us on Facebook!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Official Nürburgring TOP 200 lap times	AK370Z	Track / Autocross / Drifting / Dragstrip	30	04-08-2016 02:12 AM
lap times	boosted180	Track / Autocross / Drifting / Dragstrip	5	03-11-2010 11:16 AM
acceleration times	Bushguts	Other Vehicles	6	07-24-2009 07:06 PM
LA Times article and video	AB370Z	Nissan 370Z Photos / Spyshots / Video / Media Gallery	4	12-21-2008 06:13 AM
LA Times: Hook'n up with the 370Z	cstr_Cali	Nissan 370Z Photos / Spyshots / Video / Media Gallery	5	12-02-2008 11:56 AM

08-14-2009, 12:09 AM	#2 (permalink)
davidyan Base Member Join Date: Jun 2009 Location: CA Posts: 244 Drives: PG 370Z Sport 6MT Rep Power: 15	haven't tested it yet but was curious as to how you are measuring the 0-60 times. At the track? G-Tech Pro?

08-14-2009, 12:11 AM	#3 (permalink)
shabarivas A True Z Fanatic Join Date: Apr 2009 Location: Sacramento, CA Posts: 2,188 Drives: 370z MB 6mt Rep Power: 914	And how are you measuring that???

08-14-2009, 06:52 AM	#4 (permalink)
Z eliminator A True Z Fanatic Join Date: Jul 2009 Location: Ontario Canada Posts: 1,659 Drives: 370 Z 7AT Sports Rep Power: 18	Based on the 1/8 mile my 370z 7 AT sport did it 4.4 seconds 2.01 60ft times. (Stillen G3 intake and 4.08 gears. ) Stock air preasure in rear tires.

08-14-2009, 09:19 PM	#6 (permalink)
frost Retired admin Join Date: Dec 2008 Location: Winterfell Posts: 106,613 Drives: Your Wife Crazy Rep Power: 0	I won't bother to hit to the track until it gets under 90 degrees here at night. But I will keep you informed

08-14-2009, 10:40 PM	#7 (permalink)
Z eliminator A True Z Fanatic Join Date: Jul 2009 Location: Ontario Canada Posts: 1,659 Drives: 370 Z 7AT Sports Rep Power: 18	My berk cats and stillen exhaust are being installed this tuesday night. Can not wait to see what it runs like

10-09-2009, 04:48 PM	#9 (permalink)
jpit Enthusiast Member Join Date: Feb 2009 Location: Washington State Posts: 440 Drives: 370Z Tour MT w/Spt Rep Power: 16	I have a MT Touring with sport package and have added Berk HFCs and R2C intakes. Just ran 3 0-60 runs and the best was 5.169 recorded with laplogger. Car had about 1/2tank of gas and driver weighs about 180, temp was 60 degrees. I am happy with this result (equals about what a pro driver gets with a stock 370Z) and could probably break into the 4s but really don't want to take too many miles off the life of the clutch.

11-03-2009, 11:01 AM	#14 (permalink)
Matt A True Z Fanatic Join Date: Oct 2009 Location: Augusta, GA Age: 41 Posts: 1,680 Drives: 2010 Avalanche LT Rep Power: 18	Are the manual/paddle shifter drivers pushing 0-60 in 2nd gear or shifting to 3rd? I've seen references to 2nd gear hitting redline at 62 mph, so I'm unsure if the small delay from shifting to 3rd is worth the time, or if hitting 60 in 2nd is worth the risk.

11-04-2009, 12:38 AM	#15 (permalink)
jpit Enthusiast Member Join Date: Feb 2009 Location: Washington State Posts: 440 Drives: 370Z Tour MT w/Spt Rep Power: 16	Are you guys getting any wheel hop with your launches?