Nissan 370Z Forum

Nissan 370Z Forum (http://www.the370z.com/)
-   Track / Autocross / Drifting / Dragstrip (http://www.the370z.com/track-autocross-drifting-dragstrip/)
-   -   official 1/4 mile track times (http://www.the370z.com/track-autocross-drifting-dragstrip/36566-official-1-4-mile-track-times.html)

Z eliminator 01-17-2016 12:41 PM

im at 650 ft elevation

z

SharpByCoop 01-18-2016 07:48 AM

When I ran my 11.13's, the temp (45°) and AD at Atco was the equivalent of -1000 feet.

That's just how it is.

Coop

ajcool2 01-18-2016 12:32 PM

Ugh well hopefully it doesn't happen to me. I might buy an extra one to have on standby.

Spectrum 01-20-2016 07:12 AM

Quote:

Originally Posted by Z eliminator (Post 3390189)
i also cracked my flex plate
it make a sound like the rods are hitting the block
a banging sound at the back of the engine block
GTM heat treated mine and so far it has held up
make sure you get new bolts when you install the new plate
the torque converter is a pain to fill and it takes a few times to get the tranny fluid full.
the time to beat is 12.343 @ 114.14 ( 183.8 KM/H) for a 7 AT
Jnaut ran a 12.28 with a 6 MT

Z

In my situation there was no sound.

I have replaced transmissiom oil before and I know it takes time and long procedure.

Yes, I have seen your time 12.3 and it's really great. I think I'm not too far.

BTW, good luck in your new build.

Spectrum 01-20-2016 07:16 AM

What's the procedure here to get my number post in the list ?.

I posted the time slip.

tranceformer 02-01-2016 08:37 PM

Quote:

Originally Posted by Spectrum (Post 3392485)
What's the procedure here to get my number post in the list ?.

I posted the time slip.

Just send me a PM, I update every few weeks as I get a chance.

Also, could you send me a better copy of the slip? I can't see what some of the numbers correspond to... part of it is cut off.

ajcool2 03-26-2016 09:09 PM

Welp finally got some bolt-ons and was able to make it to the track for the first time this season. I ended up running a 12.62@111 and trapped 112 multiple times. I still need a full tune which will probably be done after my next phase of mods. Current mods are AAM intakes, Art pipes, Ark Grip exhaust and NST Pulleys. I'll upload the video later tonight.

http://i5.photobucket.com/albums/y18...psizj243fu.jpg

ajcool2 03-26-2016 09:41 PM

My other times for the day.

http://i5.photobucket.com/albums/y18...psqwy6hq9z.jpg

ajcool2 03-27-2016 01:48 AM

Just uploaded the video.

https://youtu.be/24zYmSvboj4

b1adesofcha0s 03-27-2016 12:47 PM

Quote:

Originally Posted by ajcool2 (Post 3444807)
Just uploaded the video.

https://youtu.be/24zYmSvboj4

Hey that exhaust looks very familiar :p :tup:

ajcool2 03-28-2016 12:13 AM

Quote:

Originally Posted by b1adesofcha0s (Post 3444971)
Hey that exhaust looks very familiar :p :tup:

Yup lol. It sounds better than I thought it would. Thx for the deal.

b1adesofcha0s 03-28-2016 08:50 AM

Quote:

Originally Posted by ajcool2 (Post 3445342)
Yup lol. It sounds better than I thought it would. Thx for the deal.

Glad you're putting it to good use. You should come check out my new exhaust sometime. Sounds a lot better :rofl2:

FPenvy 03-28-2016 08:52 AM

no tune and a 12.63.........something is off here.

what tires are being used?

ajcool2 03-28-2016 11:41 AM

Quote:

Originally Posted by b1adesofcha0s (Post 3445470)
Glad you're putting it to good use. You should come check out my new exhaust sometime. Sounds a lot better :rofl2:

LOL yeah I bet it does! Let me know when the next meet is I'll come through.

ajcool2 03-28-2016 11:49 AM

Quote:

Originally Posted by FPenvy (Post 3445471)
no tune and a 12.63.........something is off here.

what tires are being used?

I'm running AAM intakes without the sleeve so I did a quick street tune to fix the AFR's and get the car running right. The timing still needs to be tuned so I'll be hitting the dyno in the next few weeks to get everything dialed in properly.

The tires are the same one that were on the car when I bought it in June. I'll check to see exactly what they are.


All times are GMT -5. The time now is 02:10 PM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 PL2