Nissan 370Z Forum

Nissan 370Z Forum (http://www.the370z.com/)
-   Track / Autocross / Drifting / Dragstrip (http://www.the370z.com/track-autocross-drifting-dragstrip/)
-   -   official 1/4 mile track times (http://www.the370z.com/track-autocross-drifting-dragstrip/36566-official-1-4-mile-track-times.html)

tranceformer 12-03-2015 07:31 PM

updated!

Spectrum 12-24-2015 07:36 AM

1 Attachment(s)
I got best 12.7.

Bolt ons, 7AT basic sport 09. Uprev tuned and custom long tube CAI and street tires ( nitto Invo 19 305 ).

I'm from United Arab Emirates.

1/4 mile run on Yas Drag center Track.

More tests to come during next month. My target is to get world best 370z NA record then I will go FI.

Spectrum 01-15-2016 01:53 PM

1 Attachment(s)
After doing some runs yesterday ... and with little more power, I was able to run 1.90 60ft .. and with spin in 2nd gear ... I run 12.72 ...

But the bad result was ...... see the attached picture ..

FPenvy 01-15-2016 02:16 PM

Quote:

Originally Posted by Spectrum (Post 3389217)
After doing some runs yesterday ... and with little more power, I was able to run 1.90 60ft .. and with spin in 2nd gear ... I run 12.72 ...

But the bad result was ...... see the attached picture ..

cracked flexplate?

Spectrum 01-15-2016 09:18 PM

Quote:

Originally Posted by FPenvy (Post 3389244)
cracked flexplate?

Yes .. it's almost become into two pieces. Time to upgrade.

FPenvy 01-16-2016 12:49 AM

Quote:

Originally Posted by Spectrum (Post 3389535)
Yes .. it's almost become into two pieces. Time to upgrade.


How did it feel to let you know it was cracked?

ssmoked 01-16-2016 08:10 AM

Quote:

Originally Posted by Spectrum (Post 3389217)
After doing some runs yesterday ... and with little more power, I was able to run 1.90 60ft .. and with spin in 2nd gear ... I run 12.72 ...

But the bad result was ...... see the attached picture ..

Did you recently took the engine/transmission apart to mod it for more power?

Spectrum 01-16-2016 11:11 AM

Quote:

Originally Posted by FPenvy (Post 3389594)
How did it feel to let you know it was cracked?

Oil leak started from the torque converter.. After the runs on track and spinning the tires on 2nd. So I decided to come with semi slicks tires next time .. While driving back I noticed some smoke in fuel station which was caused by the oil on the exhaust. Next day checked and noticed the crack, so removed everything.

Spectrum 01-16-2016 11:11 AM

Quote:

Originally Posted by ssmoked (Post 3389682)
Did you recently took the engine/transmission apart to mod it for more power?

Nope. The car is only with bolt ons.

ssmoked 01-16-2016 11:49 PM

Quote:

Originally Posted by Spectrum (Post 3389749)
Nope. The car is only with bolt ons.

How many miles on the Z?

Spectrum 01-17-2016 06:39 AM

Quote:

Originally Posted by ssmoked (Post 3390106)
How many miles on the Z?

Around 70 K.

ssmoked 01-17-2016 07:02 AM

Quote:

Originally Posted by Spectrum (Post 3390154)
Around 70 K.

Did you break torqued it to high rpm on the drag to cause the flex plate to crack?

Spectrum 01-17-2016 08:25 AM

Quote:

Originally Posted by ssmoked (Post 3390158)
Did you break torqued it to high rpm on the drag to cause the flex plate to crack?

It happened during the drag day.

Z eliminator 01-17-2016 09:08 AM

i also cracked my flex plate
it make a sound like the rods are hitting the block
a banging sound at the back of the engine block
GTM heat treated mine and so far it has held up
make sure you get new bolts when you install the new plate
the torque converter is a pain to fill and it takes a few times to get the tranny fluid full.
the time to beat is 12.343 @ 114.14 ( 183.8 KM/H) for a 7 AT
Jnaut ran a 12.28 with a 6 MT

Z

2010Nismo370z 01-17-2016 12:22 PM

You guys with top times are all 0 elevation track im here at 1200 elevation trying to break the all motor record no cams or anything like that....0 elevation I would be right up there fellaz haha!


All times are GMT -5. The time now is 05:13 AM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 PL2