Quote:
|
1 Attachment(s)
Annnndddd I did it. 12.80 stock. My other runs of the day were 12.9's and a 12.89. Also last night I trapped 110.
|
How much do you weigh?
Sent from my iPhone using Tapatalk |
Quote:
|
1 Attachment(s)
Here are my other runs from today.
|
great work ajcool! way to represent for the 370Z is your car 6spd
|
Quote:
0.074 R/T? holy ****. you must have thought you blew that one right at the start. lol. good job! |
Quote:
Either way, great run |
Good job & way to represent the 7sp.Auto! Mine weighs 3640 w/me in it and full fuel....subtract 3/4 of fuel and I'm still over 3500
Sent from my iPhone using Tapatalk |
Quote:
|
Quote:
|
1 Attachment(s)
Quote:
|
Nice slips Aj.. you would of beaten me every run!!
YzGyz |
Nice slips Aj.. you would of beaten me every run!!
YzGyz |
Quote:
|
updated!
|
1 Attachment(s)
I got best 12.7.
Bolt ons, 7AT basic sport 09. Uprev tuned and custom long tube CAI and street tires ( nitto Invo 19 305 ). I'm from United Arab Emirates. 1/4 mile run on Yas Drag center Track. More tests to come during next month. My target is to get world best 370z NA record then I will go FI. |
1 Attachment(s)
After doing some runs yesterday ... and with little more power, I was able to run 1.90 60ft .. and with spin in 2nd gear ... I run 12.72 ...
But the bad result was ...... see the attached picture .. |
Quote:
|
Quote:
|
Quote:
How did it feel to let you know it was cracked? |
Quote:
|
Quote:
|
Quote:
|
Quote:
|
Quote:
|
Quote:
|
Quote:
|
i also cracked my flex plate
it make a sound like the rods are hitting the block a banging sound at the back of the engine block GTM heat treated mine and so far it has held up make sure you get new bolts when you install the new plate the torque converter is a pain to fill and it takes a few times to get the tranny fluid full. the time to beat is 12.343 @ 114.14 ( 183.8 KM/H) for a 7 AT Jnaut ran a 12.28 with a 6 MT Z |
You guys with top times are all 0 elevation track im here at 1200 elevation trying to break the all motor record no cams or anything like that....0 elevation I would be right up there fellaz haha!
|
im at 650 ft elevation
z |
When I ran my 11.13's, the temp (45°) and AD at Atco was the equivalent of -1000 feet.
That's just how it is. Coop |
Ugh well hopefully it doesn't happen to me. I might buy an extra one to have on standby.
|
Quote:
I have replaced transmissiom oil before and I know it takes time and long procedure. Yes, I have seen your time 12.3 and it's really great. I think I'm not too far. BTW, good luck in your new build. |
What's the procedure here to get my number post in the list ?.
I posted the time slip. |
Quote:
Also, could you send me a better copy of the slip? I can't see what some of the numbers correspond to... part of it is cut off. |
Welp finally got some bolt-ons and was able to make it to the track for the first time this season. I ended up running a 12.62@111 and trapped 112 multiple times. I still need a full tune which will probably be done after my next phase of mods. Current mods are AAM intakes, Art pipes, Ark Grip exhaust and NST Pulleys. I'll upload the video later tonight.
http://i5.photobucket.com/albums/y18...psizj243fu.jpg |
|
|
Quote:
|
All times are GMT -5. The time now is 10:27 AM. |
Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 PL2