First 1/4 pass 12.9 @ 106mph

jnaut · 08-13-2010, 08:44 PM

Quote:

Originally Posted by RCZ

Lol you hear that Jay, you go slower with FI headers.... great purchase decision

Quote:

Originally Posted by Z eliminator

for sure just look at shumbys first dyno's with the headers on

well.... raul u and i both i was faster than u before the sc. hahaha but seriously ultimately i plan on a big bore set-up which the headers will be perfect.

eliminator, that may be case with shumbys car but u cant compare sc to n/a.

but yes over all i do feel you will lose low end tq with headers. so i supplemented the lack of tq with gears.

jnaut · 08-13-2010, 08:54 PM

Quote:

Originally Posted by Z eliminator

What did you want to see on the time slip. It strange that the car only had a G3 intake, stillen exhaust and berk cats on with the stock rev limiter set at 7500 on the 12.8009 pass.
Now that it has the stillen headers and makes 19 rwhp more my best pass now is 12.92.
It now has trapped at 113. vs 110.3 on that run. When i look at the dyno i have lost hp and torque between 4800 to 5900 rpm. but have gained power from 5900 to 8100. With the headers, tune, and pulley.
It s hard to belive it gone quicker on the stock 19 inch tires VS the drag radials.
I feel that the the performance of the car is governed by the outside air temp, humidity and oil temps. When the outside air temp is between 50 to 55 degtress out side my car comes to life and it just screams. ( it sounds different ).

Not trying to attack you, but for you to trap 113 mph that is a hell of lot of hp/tq. i feel there might have been drama with the computer system at your track. i would constantly trap 114mph running 11.9/12.0 in my mustang. yes i do understand the cars are totally different, but hp to weight is the same.

Sibze · 08-13-2010, 10:34 PM

I was there when he ran 13.0's why is it so hard for you to believe he did a 12.8? Because you can't?

First no one believes him and wants time slips now it's "something must have been wrong with the computer"

I was at the track tonight with a guy that owns a Honda bike. The best he had ever done was a 11.3 something tonight he did a 10.77, although something must have been wrong with the computer lol!

chuckd05 · 08-13-2010, 10:34 PM

Jnaut, Im going to the track in 2 weeks... trying to best my 12.94 .... Battle for the fastest 6 speed is on my friend , I think I still have u beat by a few hundreths! lol

Im so angry at myself for not throwing 4.08's in my VLSD pumpkin I installed... I ran my 12.95 with the open diff than threw the VLSD in, I should of done the gears...

How did your car like the flywheel ? I just un installed my pulley and am contemplating the flywheel next .... Is the chatter bad with the Fidanza ?

Sibze · 08-13-2010, 10:40 PM

O jeez 12.95 there must have been some "drama" with the computer!

Edit: Chuck that was directed back at jnauy not you! I trust your time!

frost · 08-13-2010, 11:01 PM

Quote:

Originally Posted by jnaut

Not trying to attack you, but for you to trap 113 mph that is a hell of lot of hp/tq. i feel there might have been drama with the computer system at your track.

I know right, sometimes my space bar doesn't work right. My girl thinks it's because all of the times I came on the keyboard looking at porn, but I told her my computer was just loaded with too much drama.

Seriously though, that comment was:

Sibze · 08-13-2010, 11:03 PM

LOL

this is why we love you Frost!

Trips · 08-13-2010, 11:23 PM

jnaut · 08-14-2010, 07:14 AM

Quote:

Originally Posted by Sibze

I was there when he ran 13.0's why is it so hard for you to believe he did a 12.8? Because you can't?

First no one believes him and wants time slips now it's "something must have been wrong with the computer"

I was at the track tonight with a guy that owns a Honda bike. The best he had ever done was a 11.3 something tonight he did a 10.77, although something must have been wrong with the computer lol!

did you read my post??

i never once said i dont believe he ran 12.8's . i was only questioning the validity of a 113 mph trap speed. and not due to him lying but the reliability of the computer clocking the trap speed.

jnaut · 08-14-2010, 07:22 AM

Quote:

Originally Posted by chuckd05

Jnaut, Im going to the track in 2 weeks... trying to best my 12.94 .... Battle for the fastest 6 speed is on my friend , I think I still have u beat by a few hundreths! lol

Im so angry at myself for not throwing 4.08's in my VLSD pumpkin I installed... I ran my 12.95 with the open diff than threw the VLSD in, I should of done the gears...

How did your car like the flywheel ? I just un installed my pulley and am contemplating the flywheel next .... Is the chatter bad with the Fidanza ?

yes, chuck there is input shaft rattle!! it is most noticeable after the car has been driven for a while and if you go through a drive through it echos pretty good off the wall. i deff would have put the gears in especially with and open diff, no srm drama. but good luck!! ill be back the wednesday.

tranceformer · 08-14-2010, 08:08 AM

Quote:

Originally Posted by Sibze

First no one believes him and wants time slips now it's "something must have been wrong with the computer"

It may or may not be the case now, but computers screw up from time to time.

Example, my last trip to the track my 1/8 mile trap speeds were: 144, 131, 332, 101, 200. And my Z is stock.

08-14-2010, 02:07 PM

LMFAO @ 332 haha

tranceformer · 08-14-2010, 02:28 PM

Quote:

Originally Posted by blue660r01

LMFAO @ 332 haha

I don't have a roll cage so I coasted down the rest of the track to 13.6@103mph.

Z eliminator · 08-14-2010, 03:09 PM

Here's the time slip June 27, 11.32 am.
60 ft 2.091
330 / 5.64
1/8 / 8.485
mph / 85.66
1000/ 10.958
1/4 / 13.006
mph/ 112.08

I can not find the 113 mph trap time slip but Sibze was there.
Here is the 112.08 trap run.

You should look at my dyno's 320.1 rwhp @ 7300 rpm and 302 @ 7850 and its a 7 AT.
The air temp was 62 degrees and the RH was 57 %,
I could not do burn outs as i had not pulled my brake fuse.
The colder it is the faster it runs. I can not wait for a cold night in mid october.
" i would never post a false time in this post. "
In Septmber the Z club drag day will be held in St Thomas race way and its a faster track than where im running now.
The track i run at now is the best track in Canada.
Chris goes to the track with me all the time and he watches all my time's and takes videos for me
He will be posting my 2 runs last time i went to the track.
Z

jnaut · 08-14-2010, 03:33 PM

Quote:

Originally Posted by Z eliminator

Here's the time slip June 27, 11.32 am.
60 ft 2.091
330 / 5.64
1/8 / 8.485
mph / 85.66
1000/ 10.958
1/4 / 13.006
mph/ 112.08

I can not find the 113 mph trap time slip but Sibze was there.
Here is the 112.08 trap run.

You should look at my dyno's 320.1 rwhp @ 7300 rpm and 302 @ 7850 and its a 7 AT.
The air temp was 62 degrees and the RH was 57 %,
I could not do burn outs as i had not pulled my brake fuse.
The colder it is the faster it runs. I can not wait for a cold night in mid october.
" i would never post a false time in this post. "
In Septmber the Z club drag day will be held in St Thomas race way and its a faster track than where im running now.
The track i run at now is the best track in Canada.
Chris goes to the track with me all the time and he watches all my time's and takes videos for me
He will be posting my 2 runs last time i went to the track.
Z

I love that is was 62 degress @ 11 am in june.... very jealous haha. i dont doubt the fact that u have the slips.

just your boy jumped all over my nuts

and stating something that i did not say...anyways good runnin for sure! are you on drag radials? or a street tire? we dont really cool down here until december-ish so we have a long time until nice weather arrives. so, good racing keep it up!

08-13-2010, 10:34 PM	#153 (permalink)
Sibze A True Z Fanatic Join Date: May 2009 Location: Ontario, Canada Posts: 16,202 Drives: In your way Rep Power: 63	I was there when he ran 13.0's why is it so hard for you to believe he did a 12.8? Because you can't? First no one believes him and wants time slips now it's "something must have been wrong with the computer" I was at the track tonight with a guy that owns a Honda bike. The best he had ever done was a 11.3 something tonight he did a 10.77, although something must have been wrong with the computer lol! Last edited by Sibze; 08-13-2010 at 10:37 PM.

08-13-2010, 10:34 PM	#154 (permalink)
chuckd05 A True Z Fanatic Join Date: Oct 2009 Location: NY Posts: 2,391 Drives: No longer a Z Rep Power: 19	Jnaut, Im going to the track in 2 weeks... trying to best my 12.94 .... Battle for the fastest 6 speed is on my friend , I think I still have u beat by a few hundreths! lol Im so angry at myself for not throwing 4.08's in my VLSD pumpkin I installed... I ran my 12.95 with the open diff than threw the VLSD in, I should of done the gears... How did your car like the flywheel ? I just un installed my pulley and am contemplating the flywheel next .... Is the chatter bad with the Fidanza ? __________________ 09 370Z 6M PW - FBO Best 1/4 mile = 12.926 @ 109 SOLD -- 08 BMW 135i - FBO 12.1@120mph SOLD -- white 09 e92 335 Coupe Mtech - 11.9 @ 119 :-)

08-13-2010, 10:40 PM	#155 (permalink)
Sibze A True Z Fanatic Join Date: May 2009 Location: Ontario, Canada Posts: 16,202 Drives: In your way Rep Power: 63	O jeez 12.95 there must have been some "drama" with the computer! Edit: Chuck that was directed back at jnauy not you! I trust your time! Last edited by Sibze; 08-13-2010 at 10:59 PM.

08-13-2010, 11:23 PM	#158 (permalink)
Trips Administrator Join Date: May 2009 Location: Disneyland, Ca Posts: 8,728 Drives: 🔰 Rep Power: 10	__________________

08-14-2010, 03:09 PM	#164 (permalink)
Z eliminator A True Z Fanatic Join Date: Jul 2009 Location: Ontario Canada Posts: 1,659 Drives: 370 Z 7AT Sports Rep Power: 18	Here's the time slip June 27, 11.32 am. 60 ft 2.091 330 / 5.64 1/8 / 8.485 mph / 85.66 1000/ 10.958 1/4 / 13.006 mph/ 112.08 I can not find the 113 mph trap time slip but Sibze was there. Here is the 112.08 trap run. You should look at my dyno's 320.1 rwhp @ 7300 rpm and 302 @ 7850 and its a 7 AT. The air temp was 62 degrees and the RH was 57 %, I could not do burn outs as i had not pulled my brake fuse. The colder it is the faster it runs. I can not wait for a cold night in mid october. " i would never post a false time in this post. " In Septmber the Z club drag day will be held in St Thomas race way and its a faster track than where im running now. The track i run at now is the best track in Canada. Chris goes to the track with me all the time and he watches all my time's and takes videos for me He will be posting my 2 runs last time i went to the track. Z __________________ 12.343 @114.14 . 4.5 stroker motor is now being built. Dec 1 2015. Last edited by Z eliminator; 08-14-2010 at 03:11 PM.

08-13-2010, 11:03 PM	#157 (permalink)
Sibze A True Z Fanatic Join Date: May 2009 Location: Ontario, Canada Posts: 16,202 Drives: In your way Rep Power: 63	LOL this is why we love you Frost!

08-14-2010, 02:07 PM	#162 (permalink)
blue660r01 Guest Posts: n/a	LMFAO @ 332 haha

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
where to pass thru the firewall	510z	Audio & Video	14	07-03-2010 10:33 AM
12.942 @ 106.80 Pass Tonight with room to improve in my 6M	chuckd05	Track / Autocross / Drifting / Dragstrip	59	06-29-2010 01:21 AM
(Breaking News) Health Care Program pass by Congress!	PapoZalsa	The Lounge (Off Topic)	18	03-21-2010 10:24 PM
New game to pass time at work	300zx_2_370z	The Lounge (Off Topic)	0	04-06-2009 05:43 PM