Dyno numbers

Tedmeister · 02-05-2021, 05:53 PM

I have been working on this race project for over a year now.
Car has had a lot of issues from previous owner, but it was finally
ready for a base line dyno run. No tuning, just cat delete, side exit
exhaust with small muffler and OBX long tube headers. I had to replace
the rebuilt engine that came with the car with one from an '18 NISMO with
27k miles. I was surprised by how high torque was compared the the WHP.

Tedmeister · 02-09-2021, 04:10 AM

In which gear are most people doing their dyno runs? Mine were all done in fourth. Also I moved my 34 row oil cooler from my previous Z to a track
only S2000, the oil filter for the S2000 screwed right onto sandwich adapter.
The S2000 oil filter is substantially larger than the Z filter. I have a 40 row oil
cooler on this car, would it be helpful and better for the oil pump to install the
S2000 filter on my Z to increase flow?

JLarson · 02-09-2021, 06:13 AM

Dyno runs in 4th are pretty common. 5th will give a slightly higher reading.

JARblue · 02-09-2021, 09:34 AM

5th gear has a 1:1 ratio on the MT. Need to use that on an inertia dyno. Gear choice is not as critical on a load dyno.

Hotrodz · 02-09-2021, 10:59 AM

Quote:

Originally Posted by JLarson

Dyno runs in 4th are pretty common. 5th will give a slightly higher reading.

^^^Agreed! Seb does 4th gear runs because they are more accurate and better for tuning. Most will tune in forth gear and if you want a glory number then he will do a 5th gear run. Dyno numbers are for measuring cocks and boobs unless you are competing and you need to meet power to weight ratios. If you can't put the power down or drive the car then so what!

Sent from my SM-G965U using Tapatalk

Tedmeister · 02-11-2021, 06:01 PM

Had the car weighed with a full roll cage, aluminum front splitter and
aluminum rear diffuser and mostly empty fuel tank. 2747lbs.
With me in the car total of 2922lbs and 42.3% in rear and 57.7% front.
Hopefully with the wing and diffuser there will be enough downforce,
to balance the car. But at this weight I can strategically balast.
Will take the car for its maiden run at Sebring in two weeks.

Mn23 · 02-18-2021, 06:52 AM

Can you share some pictures of the interior? Want to see how it looks like when it’s gutted.

Tedmeister · 02-18-2021, 06:01 PM

Here are some interior pics. The previous owner cut into the rear wheel
wells and removed everything aft of the frame behind the diff. There was
nothing to attach the rear bumper to, so a crash bar was welded on so the
bumper could be riveted to it. I welded in supports so the top of the bumper and the rear lights could be attached to something.

Tedmeister · 02-18-2021, 06:03 PM

more pics

justin_boy · 02-28-2021, 03:22 AM

Quote:

Originally Posted by Hotrodz

^^^Agreed! Seb does 4th gear runs because they are more accurate and better for tuning. Most will tune in forth gear and if you want a glory number then he will do a 5th gear run. Dyno numbers are for measuring cocks and boobs unless you are competing and you need to meet power to weight ratios. If you can't put the power down or drive the car then so what!

Sent from my SM-G965U using Tapatalk

seb just did a fifth gear run in mine last week lol

Hotrodz · 02-28-2021, 08:36 AM

Quote:

Originally Posted by justin_boy

seb just did a fifth gear run in mine last week lol

Cool!

Sent from my SM-G965U using Tapatalk

justin_boy · 03-01-2021, 10:23 AM

Quote:

Originally Posted by Hotrodz

Cool!

Sent from my SM-G965U using Tapatalk

lol now im thinking if 329 was that high only cause it was done in 5th. I think it was 326 in 4th

Hotrodz · 03-01-2021, 02:14 PM

Quote:

Originally Posted by justin_boy

lol now im thinking if 329 was that high only cause it was done in 5th. I think it was 326 in 4th

LOL, that is why he calls it the glory number. It not really inflated because the car and dyno are at 1:1 ratio, but for tuning purposes he tunes in forth gear.

Sent from my SM-G965U using Tapatalk

02-09-2021, 06:13 AM	#3 (permalink)
JLarson A True Z Fanatic Join Date: Jun 2017 Location: Media, PA Posts: 4,074 Drives: 14 Nissan 370z MR M6 Rep Power: 2684369	Dyno runs in 4th are pretty common. 5th will give a slightly higher reading. __________________ 2014 370z Touring Sport Magma Red MT // BP Single Turbo 6467 // 63mm TB's // Z1 Ported Upper Mani // RJM Pedal // Zspeed Stage 3 Clutch // 526 WHP, 451 WTQ 2006 350z (Sold) // 1990 300zx (Sold) // 1985 300zx 2+2 (Sold)

02-09-2021, 09:34 AM	#4 (permalink)
JARblue A True Z Fanatic Join Date: Mar 2011 Location: Austin, TX Age: 43 Posts: 36,449 Drives: 11 Z34, 98 E36 M3 Rep Power: 2684440	5th gear has a 1:1 ratio on the MT. Need to use that on an inertia dyno. Gear choice is not as critical on a load dyno. __________________ 2011 370Z 6MT Sport Gun Metallic \| ARC \| CJM \| Ecutek \| FI \| Fujimura \| R2C \| SPL \| Stillen \| TWM \| Z1 \| ZSpeed \|

02-11-2021, 06:01 PM	#6 (permalink)
Tedmeister Base Member Join Date: Feb 2017 Location: Florida Posts: 68 Drives: 12 M6 Rep Power: 6776	Had the car weighed with a full roll cage, aluminum front splitter and aluminum rear diffuser and mostly empty fuel tank. 2747lbs. With me in the car total of 2922lbs and 42.3% in rear and 57.7% front. Hopefully with the wing and diffuser there will be enough downforce, to balance the car. But at this weight I can strategically balast. Will take the car for its maiden run at Sebring in two weeks. danegrey, Rusty, Hotrodz and 1 others like this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Low dyno numbers	LawlZ1211	Tuning	4	02-16-2018 11:42 PM
My dyno numbers	P's_Z	Tuning	39	04-25-2014 05:13 PM
My dyno numbers	RumbleFish	Tuning	17	02-28-2014 08:17 PM
My Dyno Numbers	joshs09slvrZ	Tuning	20	10-27-2011 07:39 AM
Dyno Numbers	PR370z	Intake/Exhaust	13	12-05-2010 09:56 AM

02-09-2021, 04:10 AM	#2 (permalink)
Tedmeister Base Member Join Date: Feb 2017 Location: Florida Posts: 68 Drives: 12 M6 Rep Power: 6776	In which gear are most people doing their dyno runs? Mine were all done in fourth. Also I moved my 34 row oil cooler from my previous Z to a track only S2000, the oil filter for the S2000 screwed right onto sandwich adapter. The S2000 oil filter is substantially larger than the Z filter. I have a 40 row oil cooler on this car, would it be helpful and better for the oil pump to install the S2000 filter on my Z to increase flow?

02-18-2021, 06:52 AM	#7 (permalink)
Mn23 Base Member Join Date: Jun 2016 Location: GTA Posts: 49 Drives: 17 Black 370Z Rep Power: 8	Can you share some pictures of the interior? Want to see how it looks like when it’s gutted.