260 oil temp with 34 row cooler.... help!

Hotrodz · 06-04-2020, 09:18 PM

I run Enos 0 w50. It will slowly climb to 260 and hold. No limp mode but will pull some timing!

Sent from my SM-G965U using Tapatalk

AlWakRa · 06-05-2020, 04:33 PM

Quote:

Originally Posted by Elmo370z

Interesting. He was using red 50 weight. Better venting would of probably helped in the Florida swap like weather.

I think Florida weather is very similar to here, hot and humid, but we don't track in summer as temps could go over 120F at day and nights would be very humid and over 105F. Vents will help specially if he wanted to back off for a lap and then continue. Although, redline is highly regarded here as I remember.

Quote:

Originally Posted by Hotrodz

I run Enos 0 w50. It will slowly climb to 260 and hold. No limp mode but will pull some timing!

Sent from my SM-G965U using Tapatalk

Seb recommended it to me due to my use, it was available locally, but when I went to get it, it was out of stock, but a friend got Amsoil dealership here in Qatar and I started using it.

Hotrodz · 06-05-2020, 04:51 PM

Quote:

Originally Posted by AlWakRa

I think Florida weather is very similar to here, hot and humid, but we don't track in summer as temps could go over 120F at day and nights would be very humid and over 105F. Vents will help specially if he wanted to back off for a lap and then continue. Although, redline is highly regarded here as I remember.

Seb recommended it to me due to my use, it was available locally, but when I went to get it, it was out of stock, but a friend got Amsoil dealership here in Qatar and I started using it.

LOL, I have close to two cases because I boght them right before I blew my motor 18 months ago. I guess I am prepared. There are some racing oils out there now in xxw50. I think Motul makes one and I can't remember the other companies.

Sent from my SM-G965U using Tapatalk

Spooler · 06-12-2020, 03:26 PM

Quote:

Originally Posted by AlWakRa

I think Florida weather is very similar to here, hot and humid, but we don't track in summer as temps could go over 120F at day and nights would be very humid and over 105F. Vents will help specially if he wanted to back off for a lap and then continue. Although, redline is highly regarded here as I remember.

Seb recommended it to me due to my use, it was available locally, but when I went to get it, it was out of stock, but a friend got Amsoil dealership here in Qatar and I started using it.

Not a chance. I live in Georgia not far from the coast. It is not even close to the temps I experienced in Somalia or Saudi Arabia. That heat was no freaking joke.

Wigjiggy · 07-15-2020, 10:17 AM

Newby question: What about oil to water heat exchangers for oil cooling. Like the Laminova by Mocal. Are they better than conventional oil coolers? I don’t hear them mentioned much, so I’m guessing they’re not applicable.

Rusty · 07-15-2020, 12:29 PM

Quote:

Originally Posted by Wigjiggy

Newby question: What about oil to water heat exchangers for oil cooling. Like the Laminova by Mocal. Are they better than conventional oil coolers? I don’t hear them mentioned much, so I’m guessing they’re not applicable.

You still have to have a cooler for the water side, plus a pump. Too much extra plumbing.

Wigjiggy · 07-15-2020, 04:51 PM

Quote:

Originally Posted by Rusty

You still have to have a cooler for the water side, plus a pump. Too much extra plumbing.

Ah. Makes sense. Sounds like it would over complicate things. Thank you.

DarkJak · 07-15-2020, 09:30 PM

Quote:

Originally Posted by Wigjiggy

Newby question: What about oil to water heat exchangers for oil cooling. Like the Laminova by Mocal. Are they better than conventional oil coolers? I don’t hear them mentioned much, so I’m guessing they’re not applicable.

Complexity. I believe there are a couple Z folks on FB who have used one and routed the water side to their radiator.
It does add more load to the radiator though, so it's not entirely free cooling.

That said, a lot of cars do this from the factory because if done by the actual manufacturer, it's nicer packaging than a separate oil cooler, and also helps get oil up to temp faster.

06-04-2020, 09:18 PM	#1 (permalink)
Hotrodz A True Z Fanatic Join Date: Aug 2012 Location: NW, AZ Posts: 9,330 Drives: 10 Nissan 370z Nismo Rep Power: 2684386	I run Enos 0 w50. It will slowly climb to 260 and hold. No limp mode but will pull some timing! Sent from my SM-G965U using Tapatalk __________________ *Fast Intentions TT Installed and Tuned by Seb at SpecialtyZ 610whp 560tq:\|Fast Intentions 3" TT-TDX*\|SpecialtyZ/Fast Intentions 72 Row Oil Cooler\|SZ 6 Puck Clutch & Flywheel\|3GsCustoms\|Z1\|Wavetrac\|Hotchkis\|Whiteline \|Blitz\|Fortune Auto 500\|Fujimura\|SPL\|H&R\|TK\|TWM\|RPM Rollbar\|Sparco\|Next Level Performance\|TrackSpec\|AeroFlow Dynamics\|Pioneer\|

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Oil Cooler/Temp issue (no it's not what your thinking)	2011 Nismo#91	Track / Autocross / Drifting / Dragstrip	17	01-15-2018 04:39 PM
The two temp gauges show different temp.	cobra	Exterior & Interior	5	04-28-2014 05:50 PM
Not getting up to temp with oil cooler?	xdeslitx	Southern California Region	38	03-15-2012 10:07 PM
SOLD: GTM Differential Cooler / Mounting Shroud / Temp Controller	Equinox	Parts for sale (Private Classifieds)	9	01-04-2012 07:49 PM
fs: Megan Racing Oil Temp/Water Temp/Oil Psi Gauge	cossie1600	Parts for sale (Private Classifieds)	0	04-13-2010 09:17 PM

07-15-2020, 10:17 AM	#5 (permalink)
Wigjiggy Base Member Join Date: Jan 2019 Location: Florida Posts: 127 Drives: 2013 370Z Rep Power: 8	Newby question: What about oil to water heat exchangers for oil cooling. Like the Laminova by Mocal. Are they better than conventional oil coolers? I don’t hear them mentioned much, so I’m guessing they’re not applicable.