Brake Cooling Duct Kit for 2014 Sport

loufitness

Guys,
Looking for a Brake Cooling Duct kit for a 2014 Base with Sport Brakes...but appears the Stillen product only supports 2009 - 2012. Advise...or known kits available? I am not skilled enough to self fabricate.

Also, It appears that the entire stock dust cover is removed with duct cooling...is that correct?

__________________
2014 Pearl White Sport Pkg / Motordyne Shockwave / 25 Row Setrab / SS Brake lines / Motul RBF 600 / Hawk DTC-60 / SPL Upper Control Arms / Enkei RP07 / Hankook RS4 275/40/18 Square / Schroth Harness / EVO-R Carbon Fiber Accents / Bilstein B16 PSS 10

2011 Nismo#91

It's probably the only years they actually tested it out on. It should "probably fit" but it's just stillen covering their asses. The stock dust covers are removed.

__________________
GTR TT 493Whp/431lbft, Ecutek, Southbend 6puck,Quaife, RPM RollBar 4Point, R888R, JRZ RSPro F(10R/10C) R(10R/6C) 1000f500r inlbs+150inlbs Tender, SPL everywhere.Full Specs

DarkJak

99% sure it'll fit at the rotor end, because there weren't any changes there in later years that would block the plates.

You'll need to figure out a way to mount them to the front though. The front ducts won't fit because the bumper design changed.

__________________
@stupidtoycars | My track vids
09 7AT|MCS 2WNR|Topgunz Rotrex|Ecutek (Eugene)|Maxxis RC1|Titan-7 TS-5|OSG LSD|Rear Mount Derale Oil Cooler (WIP)+25 Trans Cooler|Fismo|G-LOC R12/R10|Zeta III L|NLR Wing and Splitter|CJM Pan and Fuel Hat|Radium Surge Tank|AP Racing CP9668

danegrey

Still sales the front fangs
https://www.stillen.com/exterior/ext...ssan-370z.html

__________________
Lots of Changes
the Z needs to be driven and driven hard for the car lives for it

takjak2

The kit will still work, you will need to re drill the front mounts to accommodate the slightly different bolt pattern

__________________
Mods | Stuff | Things | Seat Time | Nismo
facebook.com/TeamSparrowSpeed

Rusty

__________________

浪人 - 殺し屋
"The Difficult Anytime, The Impossible By Appointment Only"
http://www.the370z.com/members-370z-...o-journal.html

loufitness

Any DIY write-ups/pictures on how to connect to the newer 2014+ stock fascia?

__________________
2014 Pearl White Sport Pkg / Motordyne Shockwave / 25 Row Setrab / SS Brake lines / Motul RBF 600 / Hawk DTC-60 / SPL Upper Control Arms / Enkei RP07 / Hankook RS4 275/40/18 Square / Schroth Harness / EVO-R Carbon Fiber Accents / Bilstein B16 PSS 10

Rusty

Give Stillen a call.

__________________

浪人 - 殺し屋
"The Difficult Anytime, The Impossible By Appointment Only"
http://www.the370z.com/members-370z-...o-journal.html

JARblue

__________________

flyfish

On my 2016 Sport I had to fab up some mounting plates out of aluminum. I then centered everything, drilled a few holes in the plates and mounted the supplied bracket to my plate. The supplied bracket did not fit as you can see from the first picture. Forgot to take pics before painting...

Stillen bracket placed on opening, mounting holes do not line up;

1.jpg



My plate placed on the opening;

2.jpg



Both brackets placed on the opening;

3.jpg



Front side just for ref;

4.jpg



Mounted, pic from the rear;

5.jpg



Front view;

6.jpg



Hopefully this will give you a few ideas, not sure what a 14 Sport bumper looks like compared to a 16.

Good luck!

__________________
2016 Sport 6sp Deep Blue Pearl || AAM intake || FI TDX non-res CF + HF-Cats || TEIN MonoSport w/EFDC-II || Hotchkis sways || Z1 34 row oil + ps cooler + diff cover + oil pan spacer || TWM Short Shifter || SPL everything || MA-MS diff cooler || Stillen brake duct || ++

Rusty

That bracket looks like it was made for a different bumper. Wondering if Nissan changed a few things and Stillen didn't know about it.

__________________

浪人 - 殺し屋
"The Difficult Anytime, The Impossible By Appointment Only"
http://www.the370z.com/members-370z-...o-journal.html

loufitness

Thanks for the pictures Flyfish!
I may have to hire someone to help fabricate the new fascia intake. I wish Stillen would step up support 2013 and newer. I called stillen and got a disappointing response...in essence they said "go figure it our yourself".

__________________
2014 Pearl White Sport Pkg / Motordyne Shockwave / 25 Row Setrab / SS Brake lines / Motul RBF 600 / Hawk DTC-60 / SPL Upper Control Arms / Enkei RP07 / Hankook RS4 275/40/18 Square / Schroth Harness / EVO-R Carbon Fiber Accents / Bilstein B16 PSS 10