Velox rear diffuser

OptionZero · 09-20-2017, 04:52 PM

Quote:

Originally Posted by NorthStyle

My bad on that man... feel like I talked you into getting it and now won't work for the vast majority of us.

Carlito seemed to want one, so i offered it to him at cost + shipping

don't really want to go to the hassle of hacking anything to make it fit

secondnissan · 09-20-2017, 05:18 PM

After adjusting my fast intentions exhaust cans will clear on lowest setting of diffuser. Front bracket needs to be modified (narrowed) to fit in between exhaust pipes. Relatively minor. Dont sell just yet. I will post pictures when I'm done. Only limited time to work on it.

Hotrodz · 09-20-2017, 06:12 PM

Quote:

Originally Posted by secondnissan

After adjusting my fast intentions exhaust cans will clear on lowest setting of diffuser. Front bracket needs to be modified (narrowed) to fit in between exhaust pipes. Relatively minor. Dont sell just yet. I will post pictures when I'm done. Only limited time to work on it.

Nice to hear some good news on this!

Sent from my SM-N910P using Tapatalk

OptionZero · 09-20-2017, 06:21 PM

When you say modified the cans, did you mean return them to "normal," since i believe yours were modified?

Rusty · 09-20-2017, 07:12 PM

Quote:

Originally Posted by OptionZero

When you say modified the cans, did you mean return them to "normal," since i believe yours were modified?

Since the cans are hidden with the diffuser now. You can take a BMF hammer to the cans for clearance.

I hope no one does this. I bet it has crossed a few minds.

secondnissan · 09-20-2017, 09:16 PM

Drivers side muffler sat about a 1/2 in lower to clear fins on nismo differential cover. I cut the fin off and raised the muffler to match passenger side muffler.

Spooler · 09-20-2017, 10:06 PM

Quote:

Originally Posted by Rusty

Since the cans are hidden with the diffuser now. You can take a BMF hammer to the cans for clearance.

I hope no one does this. I bet it has crossed a few minds.

I ran over an alligator (tire tread) on the interstate and dented one of my cans on the backside. Problem solved.

Hotrodz · 09-20-2017, 11:23 PM

Quote:

Originally Posted by secondnissan

Drivers side muffler sat about a 1/2 in lower to clear fins on nismo differential cover. I cut the fin off and raised the muffler to match passenger side muffler.

Pictures please and thank you!

Hotrodz · 09-21-2017, 03:17 PM

Well...I went by the shop this morning and there is no way the diffuser is going to work on my Z. The muffler can hang way to low. So they will be up for sale in the near future.

Spooler · 09-21-2017, 03:30 PM

Quote:

Originally Posted by hotrodz

well...i went by the shop this morning and there is no way the diffuser is going to work on my z. The muffler can hang way to low. So they will be up for sale in the near future.

crap!!!!!!!

Rusty · 09-21-2017, 04:34 PM

Quote:

Originally Posted by Hotrodz

Well...I went by the shop this morning and there is no way the diffuser is going to work on my Z. The muffler can hang way to low. So they will be up for sale in the near future.

Cut the diffuser to fit around the cans. Or straight pipe it.

Hotrodz · 09-21-2017, 04:43 PM

Quote:

Originally Posted by Rusty

Cut the diffuser to fit around the cans. Or straight pipe it.

You can buy it from me and show me my old one armed brother!

Sent from my SM-N910P using Tapatalk

Rusty · 09-21-2017, 05:49 PM

Quote:

Originally Posted by Hotrodz

You can buy it from me and show me my old one armed brother!

Sent from my SM-N910P using Tapatalk

Thanks for the offer. But I think I could make my own. Because of the cans and the diff cooler. I would have to design it around those 2 things. From the pictures I've seen on the diffuser. It mounts in front at the same spot as the diff cooler. I would have to have an opening in the center of the diffuser for the opening of the diff cooler.

Hotrodz · 09-21-2017, 06:08 PM

I have a couple of ideas up my sleeve for having one built. The first has come with a hefty but fair price to do a custom build. Like many things if there is more than just me doing the purchase I'm sure the price would be less.

Sent from my SM-N910P using Tapatalk

NorthStyle · 09-21-2017, 11:32 PM

Quote:

Originally Posted by Hotrodz

Well...I went by the shop this morning and there is no way the diffuser is going to work on my Z. The muffler can hang way to low. So they will be up for sale in the near future.

Do yours hang that much lower than the normal TDX due to being 3"? Just wondering since secondnissan's clears minus the bracket and you say that yours won't fit at all.

09-20-2017, 05:18 PM	#122 (permalink)
secondnissan Base Member Join Date: May 2011 Location: chicago burbs Posts: 70 Drives: 10 370z 7at Rep Power: 13	After adjusting my fast intentions exhaust cans will clear on lowest setting of diffuser. Front bracket needs to be modified (narrowed) to fit in between exhaust pipes. Relatively minor. Dont sell just yet. I will post pictures when I'm done. Only limited time to work on it. Hotrodz likes this.

09-20-2017, 06:21 PM	#124 (permalink)
OptionZero A True Z Fanatic Join Date: Apr 2011 Location: Sacramento Posts: 3,159 Drives: 15 370Z Nismo 6MT Rep Power: 203226	When you say modified the cans, did you mean return them to "normal," since i believe yours were modified? __________________ OptionZero Build Thread

09-20-2017, 09:16 PM	#126 (permalink)
secondnissan Base Member Join Date: May 2011 Location: chicago burbs Posts: 70 Drives: 10 370z 7at Rep Power: 13	Drivers side muffler sat about a 1/2 in lower to clear fins on nismo differential cover. I cut the fin off and raised the muffler to match passenger side muffler. Hotrodz likes this.

09-21-2017, 03:17 PM	#129 (permalink)
Hotrodz Premium Member Join Date: Aug 2012 Location: NW, AZ Posts: 9,330 Drives: 10 Nissan 370z Nismo Rep Power: 2684384	Well...I went by the shop this morning and there is no way the diffuser is going to work on my Z. The muffler can hang way to low. So they will be up for sale in the near future. __________________ *Fast Intentions TT Installed and Tuned by Seb at SpecialtyZ 610whp 560tq:\|Fast Intentions 3" TT-TDX*\|SpecialtyZ/Fast Intentions 72 Row Oil Cooler\|SZ 6 Puck Clutch & Flywheel\|3GsCustoms\|Z1\|Wavetrac\|Hotchkis\|Whiteline \|Blitz\|Fortune Auto 500\|Fujimura\|SPL\|H&R\|TK\|TWM\|RPM Rollbar\|Sparco\|Next Level Performance\|TrackSpec\|AeroFlow Dynamics\|Pioneer\|

09-21-2017, 06:08 PM	#134 (permalink)
Hotrodz Premium Member Join Date: Aug 2012 Location: NW, AZ Posts: 9,330 Drives: 10 Nissan 370z Nismo Rep Power: 2684384	I have a couple of ideas up my sleeve for having one built. The first has come with a hefty but fair price to do a custom build. Like many things if there is more than just me doing the purchase I'm sure the price would be less. Sent from my SM-N910P using Tapatalk __________________ *Fast Intentions TT Installed and Tuned by Seb at SpecialtyZ 610whp 560tq:\|Fast Intentions 3" TT-TDX*\|SpecialtyZ/Fast Intentions 72 Row Oil Cooler\|SZ 6 Puck Clutch & Flywheel\|3GsCustoms\|Z1\|Wavetrac\|Hotchkis\|Whiteline \|Blitz\|Fortune Auto 500\|Fujimura\|SPL\|H&R\|TK\|TWM\|RPM Rollbar\|Sparco\|Next Level Performance\|TrackSpec\|AeroFlow Dynamics\|Pioneer\|

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
EVO-R Nismo rear diffuser / LED rear light mount	EVOR	Exterior & Interior	24	08-08-2019 08:56 AM
[FOR SALE] ShineAuto Rear Spats & EVO-R Rear Diffuser	pfdaxe	Parts for sale (Private Classifieds)	5	07-14-2014 11:56 AM
Fujimara Rear Diffuser VS. EVO-R NEW Diffuser	KB2	Exterior & Interior	12	02-11-2014 08:03 PM
[WTB] Stillen G3, NISMO Exhaust, Rear Spats & Diffuser, Add-On Rear Spoiler	pfdaxe	Parts for sale (Private Classifieds)	4	10-25-2012 09:29 AM
WTB: Stillen G3, Nismo Exhaust, Rear Spats & Diffuser, Add-On Rear Spoiler	pfdaxe	Wanted	0	10-19-2012 09:58 AM