MA Motorsports Diff Cooler Install

synolimit · 05-24-2017, 08:59 AM

They help! Ive heard others hit 300+ in a lap or two. Ive yet to see mine over 260* which is why i havent replaced my oem VLSD. If the oem silicone stays cool then the oem LSD should still function correcty.

Spooler · 05-24-2017, 12:53 PM

Hey Rusty do you have a picture of this cooler mounted under the car. Curious to see how it is mounted.

Rusty · 05-24-2017, 04:04 PM

Quote:

Originally Posted by Spooler

Hey Rusty do you have a picture of this cooler mounted under the car. Curious to see how it is mounted.

No I don't. I seen it mounted on a Z that MA Motorsports had at ZDayZ. The front part mounts to the frame just behind the diff. The piece that sticks down. The rear part of the bracket, which has the fan mounts to the frame, just behind the bumper. The pump is on top of the assembly. When installed. You can't see it unless you crawl under the bumper to look. What I'm planning is to cut the lower part of the bumper. Made an aluminum shroud from the fan to the rear so that it has straight air flow. And I think it will look neat.

Rusty · 05-24-2017, 04:06 PM

Quote:

Originally Posted by synolimit

They help! Ive heard others hit 300+ in a lap or two. Ive yet to see mine over 260* which is why i havent replaced my oem VLSD. If the oem silicone stays cool then the oem LSD should still function correcty.

What? No Wavetrac yet? I thought you would have one installed by now.

synolimit · 05-24-2017, 08:43 PM

Quote:

Originally Posted by Rusty

What? No Wavetrac yet? I thought you would have one installed by now.

Nope, not yet. Idk what to install next. Nothings really needed.

BGTV8 · 05-25-2017, 06:41 AM

Man, I am so jealous right now ............

Rusty · 05-25-2017, 06:52 AM

Quote:

Originally Posted by BGTV8

Man, I am so jealous right now ............

You planning on running a diff cooler in your car?

BGTV8 · 05-25-2017, 07:24 AM

Yes, plus gearbox cooler, all controlled by M150.

M150 and dash turned up last week and ECU to be fitted mid-June and will drive twin Jenvey stepper motors to control the ITB kit.

Should be on track by end of July ...........

Limiting factor is a 3 days/week job running oversight on a mega-buck project based 2000kms from home base has morphed into a fustercluck demanding full-time attention so my weekly commute is now 4000kms and 3-4 mights away from home.

Biggest danger is now finding out exactly how much my half of the new house is worth when she-who-must-be-obeyed cracks the sh1ts and tells me my residence is now in the shed .......... or even further away.

I should be retired and enjoying the toys ............

MAMotorsports · 05-25-2017, 11:29 AM

Im sure ill be at some more events to say hi to more people haha.

Here are some photos of the "prototype" installed. The retail unit has an industrial black powdercoat to help keep up appearances.

carlitos_370z · 05-25-2017, 12:07 PM

Damn! That looks great Daelen

MAMotorsports · 05-25-2017, 12:47 PM

Thanks!

Finalizing a few things on the website side of stuff, so I do not have it posted yet.

If anyone is interested in one of these, shoot me a PM and I will get you pricing info and can handle the orders if need be.

-Daelen

Rusty · 05-25-2017, 02:22 PM

Here's pictures of the gauges I'm going to install when I do the diff cooler install. Custom ordered from Speedhut.

derraj06 · 05-25-2017, 06:07 PM

gauges look good! I need to either finish mine or move my evap canister somewhere else so I can fit one of these in the car. Looking forward to seeing how it performs for you.

Rusty · 05-28-2017, 07:38 PM

SPL solid diff bushings.

cv129 · 05-28-2017, 08:20 PM

Winning a prize is all the nudge Rusty needs to go balls out again haha. Might as well get your coilovers while your wallet is opened

05-24-2017, 08:59 AM	#16 (permalink)
synolimit A True Z Fanatic Join Date: May 2013 Location: Columbus, OH Posts: 5,051 Drives: 2013 Silver 370z Rep Power: 3390	They help! Ive heard others hit 300+ in a lap or two. Ive yet to see mine over 260* which is why i havent replaced my oem VLSD. If the oem silicone stays cool then the oem LSD should still function correcty. Elmo370z likes this. __________________ 13 370z-

05-24-2017, 12:53 PM	#17 (permalink)
Spooler A True Z Fanatic Join Date: Jun 2014 Location: Ga Posts: 14,041 Drives: 2013 Nismo 370z Rep Power: 2684393	Hey Rusty do you have a picture of this cooler mounted under the car. Curious to see how it is mounted. Rusty likes this.

05-25-2017, 06:41 AM	#21 (permalink)
BGTV8 A True Z Fanatic Join Date: Dec 2009 Location: 03350 Australia Posts: 1,515 Drives: 09 Nissan 370Z M6 Rep Power: 39974	Man, I am so jealous right now ............ Rusty likes this.

05-25-2017, 07:24 AM	#23 (permalink)
BGTV8 A True Z Fanatic Join Date: Dec 2009 Location: 03350 Australia Posts: 1,515 Drives: 09 Nissan 370Z M6 Rep Power: 39974	Yes, plus gearbox cooler, all controlled by M150. M150 and dash turned up last week and ECU to be fitted mid-June and will drive twin Jenvey stepper motors to control the ITB kit. Should be on track by end of July ........... Limiting factor is a 3 days/week job running oversight on a mega-buck project based 2000kms from home base has morphed into a fustercluck demanding full-time attention so my weekly commute is now 4000kms and 3-4 mights away from home. Biggest danger is now finding out exactly how much my half of the new house is worth when she-who-must-be-obeyed cracks the sh1ts and tells me my residence is now in the shed .......... or even further away. I should be retired and enjoying the toys ............ TechnicZ, danegrey, Rusty and 2 others like this.

05-25-2017, 11:29 AM	#24 (permalink)
MAMotorsports Track Member Join Date: Jul 2015 Location: Glen Arm, MD Posts: 872 Drives: 370Z Rep Power: 17	Im sure ill be at some more events to say hi to more people haha. Here are some photos of the "prototype" installed. The retail unit has an industrial black powdercoat to help keep up appearances. GaleForce, Rusty, carlitos_370z and 4 others like this. __________________ Daelen @ MA Motorsports MA-Motorsports.com https://www.facebook.com/pages/MA-Mo...C/125379858828

05-25-2017, 12:07 PM	#25 (permalink)
carlitos_370z A True Z Fanatic Join Date: Jul 2013 Location: Puerto Rico Posts: 7,157 Drives: 13 Nissan 370Z SP M6 Rep Power: 7586	Damn! That looks great Daelen Rusty and MAMotorsports like this.

05-25-2017, 12:47 PM	#26 (permalink)
MAMotorsports Track Member Join Date: Jul 2015 Location: Glen Arm, MD Posts: 872 Drives: 370Z Rep Power: 17	Thanks! Finalizing a few things on the website side of stuff, so I do not have it posted yet. If anyone is interested in one of these, shoot me a PM and I will get you pricing info and can handle the orders if need be. -Daelen RN SHARK and Rusty like this. __________________ Daelen @ MA Motorsports MA-Motorsports.com https://www.facebook.com/pages/MA-Mo...C/125379858828

05-25-2017, 06:07 PM	#28 (permalink)
derraj06 Enthusiast Member Join Date: Jun 2013 Location: Huntsville, AL Posts: 406 Drives: MB 370z Rep Power: 12	gauges look good! I need to either finish mine or move my evap canister somewhere else so I can fit one of these in the car. Looking forward to seeing how it performs for you. Rusty likes this. __________________ 2010 Monterey Blue 370Z

05-28-2017, 08:20 PM	#30 (permalink)
cv129 A True Z Fanatic Join Date: Jul 2011 Location: Dallas, TX Posts: 3,264 Drives: 09 Nismo, 16 Nismo Rep Power: 163995	Winning a prize is all the nudge Rusty needs to go balls out again haha. Might as well get your coilovers while your wallet is opened Rusty and Hotrodz like this. __________________ Setrab \| RE-71 \| SPL \| JRZ \| Nismo \| ARK \| Whiteline \| RacingBrake \| CJM Oil Pan \| Ti shield

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Z1 Motorsports 25 row oil cooler install	falconfixer	DIY Section (Do-It-Yourself)	5	05-30-2014 04:32 PM
7AT 4.08 Gear swap QUAIFE LSD Trans cooler diff cooler	matcop	Engine & Drivetrain	17	09-07-2013 10:09 AM
Akuma Motorsports Rear Diff Cooler	Kevin@AkumaMS	Engine & Drivetrain	24	05-23-2013 08:01 PM
Z1 Motorsports Thermostatic Sandwich Plate kit (For Nissan Motorsports Oil Cooler)	Dustin@Z1	Drivetrain/Engine	3	06-08-2012 11:10 AM
DIY: GT Motorsports Oil Cooler Kit Install/Review	rackley	DIY Section (Do-It-Yourself)	28	03-10-2010 10:38 AM