Chassis Help! Need a track day set-up.

m13s

Agree what everyone said on the YAW sensor. I am new to the platform but physics are physics.

I would think about going to 18" square setup to start, add stiffer springs front and rear with a good set of coil overs. Talk to your tire and suspension guys to see what they recommend for the type of driving that you do at the track. Pressures are key along with camber.

Depending on budget you will have to make a determination as to what you feel works for your wallet.

For my track set up we run 18x10.5 squared, 3.5 - front and - 2 in the rear. 2 way adjustable JRZ and I'll have to check the spring rates. We do NOT have any nannies on the car including ABS.

Rusty

1. How many trackdays you have done?
2. Stock sway bars?
3. What are your alignment specs? Post please.
4. What are your rim spec?
5. What are your tire specs?
6. What is your tire pressure front and rear?
7. What other mods have you done to the car?

__________________

浪人 - 殺し屋
"The Difficult Anytime, The Impossible By Appointment Only"
http://www.the370z.com/members-370z-...o-journal.html