2015 A/T Nismo Tech Build

jchammond

You should have the 3.69 rear axle gearing,,,gotta heat them tires good & evenly;
should get in the 1.80's 60'.

__________________
MazWorx built long block | FI-TT-100 Stage 2.75 | IPT built 7A/T

http://www.the370z.com/members-370z-...s-musings.html

markesc

z1 wavetrack with 4.08's! do it!!

$3,000 well spent if you want to put the power to the ground:

https://www.z1motorsports.com/transm...l-p-11644.html

hustleman222

This was my first time with drag radials on and I don't believe I got them hot enough. Beautiful weather out and got into the 12.7s

Attached Images

1509327158286.jpg (180.6 KB, 51 views)

__________________
316whp/262tq 12.38 @ 110mph on 3.91 gears
336whp/273tq Didn't push it hard enough.
Turbo Time

hustleman222

I recently took off the Motordyne upper intake and replaced it with the Z1 Motorsports upper. Then added the EPS big bore throttle bodies. I'm going to try and get to the track and see what it does... Stay tuned.

Btw, the fronts came in and I'm loving it

Attached Images

	1513788039573.jpg (176.0 KB, 67 views)
	1513788036349.jpg (214.1 KB, 68 views)

__________________
316whp/262tq 12.38 @ 110mph on 3.91 gears
336whp/273tq Didn't push it hard enough.
Turbo Time

hustleman222

Just wanted to throw a few picks out and give a shout-out to getyourwheels.com they have had some pretty awesome customer service. I emailed a question and Jason got right back to me in about 3 mins, this was 2 weeks after I received my wheels.
Btw I had the door handles painted to color match and I wrapped the front nismo moldings to match the wheels

Attached Images

	1514612317433.jpg (314.7 KB, 44 views)
	1514612315155.jpg (298.0 KB, 62 views)

__________________
316whp/262tq 12.38 @ 110mph on 3.91 gears
336whp/273tq Didn't push it hard enough.
Turbo Time

hustleman222

I finally made it back to the strip with similar weather. (75 degrees / bar @ 30.1) Without getting retuned after adding EPS Throttle bodies, and swapping out the motordyne intake for the ported Z1 I ran consistent 12.88, 12.925 (2x), 12.95. None of the 60' times were below a 2.03, take that for what you will. This was WITHOUT a retune. Here shortly I have Admin intakes coming in and will have a retune for them.
Do it for science! And yeah... That's right...I finally got that trophy. (Bracket winner)

EDIT: After getting the retune with the Admin intakes, EPS throttle bodies, and Z1 upper swapped out the initial run had the low end torque and hp lower than the M370 manifold. Jay worked with it and got it back to around the same on the low end.

Attached Images

	1519440411868.jpg (192.6 KB, 50 views)
	1519440408898.jpg (200.6 KB, 71 views)

__________________
316whp/262tq 12.38 @ 110mph on 3.91 gears
336whp/273tq Didn't push it hard enough.
Turbo Time

jchammond

Very Good; as I nipped the 12’s with my first of 3 passes before my car got totaled on the way home.
I know I could have got lower with smaller rear wheels/tires & some weight out of the back.
Had 345/30/19’s on 12’s...but they heated well with the line-loc & hooked all 3 passes.
Other 2 were 13.011 & 13.022


Sent from my iPhone using Tapatalk

__________________
MazWorx built long block | FI-TT-100 Stage 2.75 | IPT built 7A/T

http://www.the370z.com/members-370z-...s-musings.html