coilovers

Scott@FontanaNissan · 10-18-2016, 05:21 PM

I recommend the KW V3's without a doubt...paired with the SPL rear camber arms...and a pair of sway bars to complete the job. I'd be happy to put together a package for ya if you'd like!

Scott VanderHeide
svanderheide@fontananissan.com
Nissan Race Shop

Elmo370z · 10-18-2016, 07:23 PM

Quote:

Originally Posted by Scott@FontanaNissan

I recommend the KW V3's without a doubt...paired with the SPL rear camber arms...and a pair of sway bars to complete the job. I'd be happy to put together a package for ya if you'd like!

Scott VanderHeide
svanderheide@fontananissan.com
Nissan Race Shop

i just like to plan ahead for these things. Do it once kind of person

jchammond · 10-18-2016, 08:03 PM

Now Elmo;
If you got money like Hotrodz; just get an assortment & have a different setup for different tracks.

Elmo370z · 10-18-2016, 08:06 PM

Damn auto text. Lol im broke. Im doing a bottom end build next year. Hopefully ill have enough for a bryant racing crankshaft

Elmo370z · 10-18-2016, 08:08 PM

Im leaning towards stance, auto fortune, or kw v3

BGTV8 · 10-18-2016, 08:09 PM

Quote:

Originally Posted by Elmo370z

3k would be the most i'd like to sink into it. The kw v3 and monoflex are between 2,300-2,600 I'm ok with that.

Elmo, I suggest you look seriously at the MCA Suspension shocks (MCA Suspension)

.... their prices are AU$ and at current exchange rates, usd.75c buys 1AUD. You might have some freight costs but import taxes ought to be minimal because of the US/AUS free trade agreement.

The MCA S15 just won WTAC at Sydney motorsport park so they clearly know how to set up suspension. Many of my race buddies use MCA in their race cars.

Only problem might be service if your alternative choice can be supported with re-valve/repair local to you.

Elmo370z · 10-18-2016, 08:15 PM

Quote:

Originally Posted by BGTV8

Elmo, I suggest you look seriously at the MCA Suspension shocks (MCA Suspension)

.... their prices are AU$ and at current exchange rates, usd.75c buys 1AUD. You might have some freight costs but import taxes ought to be minimal because of the US/AUS free trade agreement.

The MCA S15 just won WTAC at Sydney motorsport park so they clearly know how to set up suspension. Many of my race buddies use MCA in their race cars.

Only problem might be service if your alternative choice can be supported with re-valve/repair local to you.

Ill take a look at them. Thank you sir

jchammond · 10-18-2016, 08:27 PM

Quote:

Originally Posted by Elmo370z

Damn auto text. Lol im broke. Im doing a bottom end build next year. Hopefully ill have enough for a bryant racing crankshaft

You doing the rod's & 8.5:1comp. piston's....or staying 11:1?

cv129 · 10-18-2016, 09:04 PM

Quote:

Originally Posted by BGTV8

Elmo, I suggest you look seriously at the MCA Suspension shocks (MCA Suspension)

.... their prices are AU$ and at current exchange rates, usd.75c buys 1AUD. You might have some freight costs but import taxes ought to be minimal because of the US/AUS free trade agreement.

The MCA S15 just won WTAC at Sydney motorsport park so they clearly know how to set up suspension. Many of my race buddies use MCA in their race cars.

Only problem might be service if your alternative choice can be supported with re-valve/repair local to you.

Especially if you are getting more and more active in track events. I would also add the ease of adjustment (aka getting to the adjustment knob) into the consideration.

KW V3 - I remember reading that KW facility in CA would no longer revalve the non competition dampers, only rebuild. Although I think a few independent shops (Robispec comes to mind) can do that.

Bilstein PSS10 - if you are gonna consider V3, you should add this to your list.

Koni - at your price range, I think you have enough to get a set of custom valved Koni along with the supporting hardwares (top hat, springs, rear height adjuster, etc). A couple of members here (redline10000 and j-rho) went that route.

Elmo370z · 10-18-2016, 09:09 PM

Quote:

Originally Posted by jchammond

You doing the rod's & 8.5:1comp. piston's....or staying 11:1?

Im doing high rev NA build. Dry sump, billet crank, etc.... far as piston compression i thinking about 12:1 or 12:5. I still want to be able to drive the car on the streets every once in a while, i don't want to be dependent on e85 or race gas.

Elmo370z · 10-18-2016, 10:58 PM

Quote:

Originally Posted by cv129

Especially if you are getting more and more active in track events. I would also add the ease of adjustment (aka getting to the adjustment knob) into the consideration.

KW V3 - I remember reading that KW facility in CA would no longer revalve the non competition dampers, only rebuild. Although I think a few independent shops (Robispec comes to mind) can do that.

Bilstein PSS10 - if you are gonna consider V3, you should add this to your list.

Koni - at your price range, I think you have enough to get a set of custom valved Koni along with the supporting hardwares (top hat, springs, rear height adjuster, etc). A couple of members here (redline10000 and j-rho) went that route.

I'll mark everything down in my notes. Thank you

10-18-2016, 05:21 PM	#16 (permalink)
Scott@FontanaNissan Supporting Nissan Dealer Join Date: Jun 2009 Location: Fontucky, CA Posts: 857 Drives: 91 Sentra GTi-R Rep Power: 25	I recommend the KW V3's without a doubt...paired with the SPL rear camber arms...and a pair of sway bars to complete the job. I'd be happy to put together a package for ya if you'd like! Scott VanderHeide svanderheide@fontananissan.com Nissan Race Shop __________________ Scott VanderHeide - Motorsports Director - Fontana Nissan/NissanRaceShop www.nissanraceshop.com www.youtube.com/scottvanderheide

10-18-2016, 08:03 PM	#18 (permalink)
jchammond A True Z Fanatic Join Date: Nov 2014 Location: South Carolina Age: 57 Posts: 15,204 Drives: 13’ 370Z TS 7A/T Rep Power: 2684394	Now Elmo; If you got money like Hotrodz; just get an assortment & have a different setup for different tracks. Hotrodz likes this. __________________ MazWorx built long block \| FI-TT-100 Stage 2.75 \| IPT built 7A/T http://www.the370z.com/members-370z-...s-musings.html

10-18-2016, 08:06 PM	#19 (permalink)
Elmo370z A True Z Fanatic Join Date: Apr 2013 Location: st. petersburg Posts: 5,707 Drives: 09 nissan 370z Sp M6 Rep Power: 295378	Damn auto text. Lol im broke. Im doing a bottom end build next year. Hopefully ill have enough for a bryant racing crankshaft jchammond likes this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[WTB] KW V3 Coilovers	Ma Zede	Parts for sale (Private Classifieds)	3	08-22-2015 08:52 PM
[FOR SALE] Aragosta Type S Coilovers, Koni Coilovers, Trans Cooler, Hotchkis Sways, Stillen HFC	dimsler	Parts for sale (Private Classifieds)	37	05-13-2014 10:34 AM
[WTB] wtb coilovers	370zsocal	Parts for sale (Private Classifieds)	1	10-22-2013 03:58 PM
Coilovers	Endgame	Brakes & Suspension	9	11-16-2010 01:44 PM
great info about coilovers vs springs..i may jus save up for coilovers instead	res0zsfa	Brakes & Suspension	15	09-09-2010 07:05 PM

10-18-2016, 08:08 PM	#20 (permalink)
Elmo370z A True Z Fanatic Join Date: Apr 2013 Location: st. petersburg Posts: 5,707 Drives: 09 nissan 370z Sp M6 Rep Power: 295378	Im leaning towards stance, auto fortune, or kw v3