Z1 - 2 piece Rotors - Sport/Akebono brakes (front)

babyzilla · 06-06-2023, 03:42 PM

Just a thought: you guys said you know he owns a company. Link the site for it. We can leave positive reviews of how he ethically conducts business

gsg740 · 06-06-2023, 04:27 PM

Quote:

Originally Posted by JARblue

What a bs excuse. The reason for warped rotors (excess pad deposits) is bad braking habits.

The problem with the Z1 2pc rotors is they are too light; they don't have enough mass to cool off properly.

Z1 2pc rotors are totally garbage for tracking, I wrapped two sets in 3 track days. Definitely under 100 mile per set. I agree the z1 rings does not have enough mass to absorb all the stopping energy from tracking condition. And also the wrapping could also contribute by its non-floating design.

People should avoid buying used 2pc rotors, especially the Z1 ones.

RumbleFish · 06-06-2023, 05:24 PM

Quote:

Originally Posted by babyzilla

Just a thought: you guys said you know he owns a company. Link the site for it. We can leave positive reviews of how he ethically conducts business

It's a specialized pharma type co. that doesn't really deal with the public so much https://rssynthesis.com/

I also think it's just him and maybe 1 other person.

I've been hammering dude with texts and, well, this isn't over yet...stay tuned.

RumbleFish · 06-06-2023, 05:29 PM

Quote:

Originally Posted by gsg740

Z1 2pc rotors are totally garbage for tracking, I wrapped two sets in 3 track days. Definitely under 100 mile per set. I agree the z1 rings does not have enough mass to absorb all the stopping energy from tracking condition. And also the wrapping could also contribute by its non-floating design.

People should avoid buying used 2pc rotors, especially the Z1 ones.

All of that is undoubtedly true.

I was sold these rotors as "never used on the track", "practically new", "nothing wrong with them" but when I asked why he was running track pads on the street,
he said "everybody who uses them on the track, uses them on the street...idiot!"

So, he admitted that he had used these at the track. All I know is they were warped, not suffering from 'pad residue'.

RumbleFish · 06-06-2023, 05:55 PM

Quote:

Originally Posted by cv129

Brake cooling for Nismo bumpers

In his own words: “Z1's effort to reduce weight is on of the reasons they warp so easily”

I always ask people to clarify, is the xxx miles street or track miles.

I did, he said he never used them on the track and then subsequently, he basically admitted that he did use them on the track.

Rusty · 06-06-2023, 09:56 PM

He found out that the Z1 rotors don't work on the track. Now he's trying to recoup some of his mistake.

cv129 · 06-06-2023, 10:24 PM

Quote:

Originally Posted by Rusty

He found out that the Z1 rotors don't work on the track. Now he's trying to recoup some of his mistake.

Don’t forget he also sold a pair of Paragon 2 pc that’s warped beyond correction.

For someone that paid like $10k for a set of BBS center lock wheels, a $1.5m+ address, I just don’t understand the need to lie just to recoup a few hundred bucks.

RumbleFish · 06-07-2023, 11:18 AM

Quote:

Originally Posted by cv129

Don’t forget he also sold a pair of Paragon 2 pc that’s warped beyond correction.

For someone that paid like $10k for a set of BBS center lock wheels, a $1.5m+ address, I just don’t understand the need to lie just to recoup a few hundred bucks.

Yeah, he said the Paragon's were perfectly fine too. Called me a 'show and shine desk jockey'. I offered to race him at Willow Springs anytime.

I told him if pays me the $350 for the rebuild kit, I won't make his life miserable.

NecioVato · 06-07-2023, 06:04 PM

Sorry - not to change the subject but since I know I’ll be needing brakes soon - and I only drive on the street - original brakes on the car with 56k on the odo - and they are still holding well (just passed inspection with them) - but….knowing I’ll need some sooner rather than later - should I avoid the Z1 2 piece since I only street drive them? And if so - recommendations that won’t break the bank or similarly priced?

Thanks in advance,

….and @Rumblefish - sorry man - THAT SUCKS and just confirms more and more that PEOPLE SUCK!

DaveZ03 · 06-08-2023, 06:42 AM

Quote:

Originally Posted by NecioVato

Sorry - not to change the subject but since I know I’ll be needing brakes soon - and I only drive on the street - original brakes on the car with 56k on the odo - and they are still holding well (just passed inspection with them) - but….knowing I’ll need some sooner rather than later - should I avoid the Z1 2 piece since I only street drive them? And if so - recommendations that won’t break the bank or similarly priced?

Thanks in advance,

….and @Rumblefish - sorry man - THAT SUCKS and just confirms more and more that PEOPLE SUCK!

I have the 2 piece on my Z, street driven only, and I haven't had an issue with them. Keep in mind I'm not hard on the breaks though and even when I am doing spirited driving, I still don't have any issues. As mentioned before, the rotors aren't really intended for track use, despite how they are advertised. Street only, in my opinion, you should be fine.

RumbleFish · 06-09-2023, 11:53 AM

Update: Got the $350 refund from this clown

Wanted me to send back the warped rings. Too bad I don't have them any longer...not that I'd have sent them anyway. I sent him the receipt for the rebuild kit.

So ends this saga.

theART · 01-04-2024, 10:16 PM

Came here to learn about Z1 rotors, and got sucked into the internet drama!

On serious note, RacingBrake is a bit out of my price range, so will be going with Frozen Rotors for my Z. Its not 2 piece, however everyone say they last a long time.

Wish these Nismo 2 piece fit Akibono brakes

https://www.z1motorsports.com/brake-...s-p-47120.html

06-06-2023, 09:56 PM	#21 (permalink)
Rusty Ronin Samurai - Assassin Join Date: Dec 2011 Location: Fayettenam,Pennsyltucky Age: 68 Posts: 34,867 Drives: 2011 Nismo GM 6M Rep Power: 2684436	He found out that the Z1 rotors don't work on the track. Now he's trying to recoup some of his mistake. RumbleFish and Memphis370Z like this. __________________ 浪人 - 殺し屋 "The Difficult Anytime, The Impossible By Appointment Only" http://www.the370z.com/members-370z-...o-journal.html

06-07-2023, 06:04 PM	#24 (permalink)
NecioVato Enthusiast Member Join Date: Jul 2009 Location: Dallas TX Posts: 319 Drives: 2017 Black Nismo Z Rep Power: 19786	Sorry - not to change the subject but since I know I’ll be needing brakes soon - and I only drive on the street - original brakes on the car with 56k on the odo - and they are still holding well (just passed inspection with them) - but….knowing I’ll need some sooner rather than later - should I avoid the Z1 2 piece since I only street drive them? And if so - recommendations that won’t break the bank or similarly priced? Thanks in advance, ….and @Rumblefish - sorry man - THAT SUCKS and just confirms more and more that PEOPLE SUCK! RumbleFish likes this.

06-09-2023, 11:53 AM	#26 (permalink)
RumbleFish Premium Member Join Date: Oct 2013 Location: Los Feliz, Ca. Posts: 1,212 Drives: '10-Sport-M6 Rep Power: 8239	Update: Got the $350 refund from this clown Wanted me to send back the warped rings. Too bad I don't have them any longer...not that I'd have sent them anyway. I sent him the receipt for the rebuild kit. So ends this saga. theART, NecioVato, Unique_Z and 3 others like this. __________________ How far, this...Utopia? F.I. CBE V2/Stillen G3 CAI/GTM 25R OC/EcuTek tune (Specialty Z)/ KW V3's/Stillen Sway bars/SPC rear camber kit/Z1 FUCA/Mich. PSS4S 255/35-295/30

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[FOR SALE] For sale: akebono front calipers, z1 2 piece front rotors	fryzia23	Parts for sale (Private Classifieds)	2	12-20-2021 08:51 PM
[WTB] WTB Z1 Akebono 2 piece front and rear rotors	kafaya1	Parts for sale (Private Classifieds)	1	08-11-2021 04:38 PM
[FOR SALE] Z1 2 Piece Akebono Front Rotors	tenkies	Parts for sale (Private Classifieds)	12	02-23-2018 09:21 AM
[FOR SALE] Z1 2 Piece Akebono Slotted Front Rotors - $450	PJ23	Parts for sale (Private Classifieds)	6	11-25-2017 05:13 PM
Z1 Motorsports: 2 Piece Akebono Front Rotors	John@Z1	Suspension/Brakes	95	11-09-2017 04:30 PM

06-06-2023, 03:42 PM	#16 (permalink)
babyzilla Enthusiast Member Join Date: Apr 2017 Location: Maryland Posts: 487 Drives: 15 Nismo Tech 6MT Rep Power: 23631	Just a thought: you guys said you know he owns a company. Link the site for it. We can leave positive reviews of how he ethically conducts business

01-04-2024, 10:16 PM	#27 (permalink)
theART Base Member Join Date: Feb 2009 Location: BC Posts: 163 Drives: To Drive Rep Power: 7822	Came here to learn about Z1 rotors, and got sucked into the internet drama! On serious note, RacingBrake is a bit out of my price range, so will be going with Frozen Rotors for my Z. Its not 2 piece, however everyone say they last a long time. Wish these Nismo 2 piece fit Akibono brakes https://www.z1motorsports.com/brake-...s-p-47120.html