Nissan Dealer (or any shop) in the Bay that can do oil cooler install over weekends?

Ventruck · 07-31-2016, 11:33 PM

Bumping (although it's not far from the top) this thread looking for any more suggestions.

onzedge has been great help, and led me to two resources. One of which I'm strongly considering, although it's gonna be a trip.

Not to 180 this thread but priorities also shifted over to clutch-related work (CSC/CMC/Flywheel/Clutch) as I had a bit of a sticky pedal the other week. I'd be arriving with parts and fluids on-hand. Got the South Bend Stage 2 package at ZSpeed and on that note, Joe's been great at clarifying and communicating with me. Clutch just needed to be shipped separately from South Bend, but everything else came to my door.

Found a local place that says they can do the work. Positive responses on Yelp and such, but I'm not 100% sure they can do this as reliably as the other place in the running (a community go-to dealer). Gonna try to get the shift knob off for starters so that's one less potential thing to go wrong.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
DIY: Stillen 19 Row Oil Cooler Install - driver side (stock PS cooler unmoved)	djpathfinder	DIY Section (Do-It-Yourself)	21	11-30-2015 05:47 AM
4.08 gears install shop/dealer recomendation	Mark Gomez	Engine & Drivetrain	1	10-22-2013 01:36 PM
Last weekends Vid from NOLA	cdoxp800	Track / Autocross / Drifting / Dragstrip	9	07-02-2012 08:22 PM
dealer recommendation for oil cooler install	Prashiy	Southern California Region	5	03-15-2012 01:19 PM
I asked NISSAN Dealer if they would install Stillen HFC	355890	Nissan 370Z General Discussions	15	05-06-2009 10:46 AM

07-31-2016, 11:33 PM	#5 (permalink)
Ventruck Track Member Join Date: Jun 2016 Location: California Posts: 785 Drives: '13 Sport+Touring M6 Rep Power: 22899	Bumping (although it's not far from the top) this thread looking for any more suggestions. onzedge has been great help, and led me to two resources. One of which I'm strongly considering, although it's gonna be a trip. Not to 180 this thread but priorities also shifted over to clutch-related work (CSC/CMC/Flywheel/Clutch) as I had a bit of a sticky pedal the other week. I'd be arriving with parts and fluids on-hand. Got the South Bend Stage 2 package at ZSpeed and on that note, Joe's been great at clarifying and communicating with me. Clutch just needed to be shipped separately from South Bend, but everything else came to my door. Found a local place that says they can do the work. Positive responses on Yelp and such, but I'm not 100% sure they can do this as reliably as the other place in the running (a community go-to dealer). Gonna try to get the shift knob off for starters so that's one less potential thing to go wrong.