10-11-2014, 04:07 PM
|
#1 (permalink)
|
|
Base Member
Join Date: Sep 2014
Location: Abingdon md
Posts: 86
Drives: 10 370z Monterey
Rep Power: 12
|
Quote:
Originally Posted by kholy
So my one concern is that Nissan told me my compression test came back and said i had 80lbs of compression and they told me i should be around 170. Would my motor have started if i was really at 80lbs of compression?
Also, I was thinking of contacting the BBB.... suggestions? not really sure how the best way to go about this is. I also had a claim open with NNA so i could call them back as well.
|
with these motors its hard to perform a compression test because the throttle boddies need to be wide open to get a good reading and the way ours work there not until the car actually is runing they stay closed no matter what on start up then fully open and allow the cam actuators to control revs . the only way to get good accurate numbers on these cars is to leak down them ..
|
|
|
Similar Threads
20Likes
Hybrid Mode
