Vert mods (with pics)

jazz · 05-25-2011, 03:26 PM

i dont! and the car only fit on the laser alignment at midas grrr

Fire · 05-25-2011, 03:30 PM

I understand that. I have to pay about $130 for each alignment.

jazz · 06-11-2011, 12:49 PM

car feels alot better...it might of been wax on the tires still. i did add about 5 lbs in the tires though.

BTW im up to 1021 km lol stop with the rain already!

Dsphoto · 06-20-2011, 06:28 AM

Just did the uprev tune for 93 octane gas and an oil cooler. 337whp! and 254 ft-lbs torque, and the delivery is smooth and linear! Thank you Performance Auto Sports. Welcome To The Experience | Performance Motorsport 2011'.

jazz · 06-20-2011, 12:15 PM

id like to see the dyno print off! what type was it on?

Dsphoto · 06-20-2011, 01:43 PM

Mustang. I will scan it tonight or tomorrow as soon as I have a chance.

Joebarchuck · 06-20-2011, 07:09 PM

Any convertible with an amuse wing or at least a big wing?

Fire · 06-20-2011, 10:06 PM

Don't know if anybody sells a big wing for the vert. This is the Spoiler Solutions factory style wing. I assume you are looking for a cf or fibreglass and not a tuner wing eh?

Joebarchuck · 06-21-2011, 01:12 PM

I like your spoiler but it won't pull off the amuse back bumper. I love the amuse back bumper but for sure the roadster does not pull it off from the pics I saw and the only reason is because of the angle that the amuse bumper has which is made to increase the angle of the coupe therefore the only way to pull the back amuse bumper off the roadster would be in my opinion to have a large wing such as the amuse wing.

Fire · 06-21-2011, 05:26 PM

You will probably have to look into "universal" wings. Sorry cannot be alot of help here.

Dsphoto · 06-21-2011, 08:16 PM

Dyno chart...

Alchemy · 06-22-2011, 07:18 AM

Quote:

Originally Posted by Dsphoto

Dyno chart...

NICE!!!!!! I have similar mods done to mine. I hope im pushin 340 whp after my UpRev tune!!!!!! Congrats man.

jazz · 06-22-2011, 07:26 AM

W

W good for you!

i should see that number with my build too then.

stillen g2
stillen headers
stillen HFC
HKS CBexhaust
and custom UpRev

Dsphoto · 06-22-2011, 07:26 AM

The numbers tell only part of the story. The car pulls smoother and is much more responsive across the range. Low and mid range performance are substantially improved far beyond what the peak numbers show. Go for the uprev but make sure the tuner is good. Interaction between the different maps is very complicated. Good software poorly applied will yield less than stellar results.
My two cents.

jazz · 06-22-2011, 03:25 PM

ya man, i am so happy for you and your numbers! as soon as i get the issues with the car worked out ill be doing some pulls and we can have a dyno race!

05-25-2011, 03:26 PM	#91 (permalink)
jazz Track Member Join Date: Feb 2011 Location: barrie ON Posts: 910 Drives: 11Zcab/12venzaV6awd Rep Power: 15	i dont! and the car only fit on the laser alignment at midas grrr __________________ One part rubber, three parts Krazy Glue.

05-25-2011, 03:30 PM	#92 (permalink)
Fire A True Z Fanatic Join Date: Aug 2010 Location: WNY Posts: 4,117 Drives: 12 ZL1 6mt black Rep Power: 42	I understand that. I have to pay about $130 for each alignment. __________________ 2012 Chevy Camaro ZL1 6MT coupe Back N' Black. 680hp

06-11-2011, 12:49 PM	#93 (permalink)
jazz Track Member Join Date: Feb 2011 Location: barrie ON Posts: 910 Drives: 11Zcab/12venzaV6awd Rep Power: 15	car feels alot better...it might of been wax on the tires still. i did add about 5 lbs in the tires though. BTW im up to 1021 km lol stop with the rain already! __________________ One part rubber, three parts Krazy Glue.

06-20-2011, 06:28 AM	#94 (permalink)
Dsphoto Base Member Join Date: Sep 2010 Location: Suffolk cty New York Posts: 159 Drives: 10 BC 370ZR S/T M6 Rep Power: 14	Just did the uprev tune for 93 octane gas and an oil cooler. 337whp! and 254 ft-lbs torque, and the delivery is smooth and linear! Thank you Performance Auto Sports. Welcome To The Experience \| Performance Motorsport 2011'. __________________ 78 Z1R, '08 ZX10R, 2010 BC Roadster S/T, 6M, Stillen G2 CAI, Invidia CBE, Berk test pipes, Painted headlights (180˚Custom), JDM rear fog, B&M short shifter, Stillen front plate mount, stubby antenna, setrab oil cooler, uprev. 337rwhp 254ft/lb corrected!

06-20-2011, 12:15 PM	#95 (permalink)
jazz Track Member Join Date: Feb 2011 Location: barrie ON Posts: 910 Drives: 11Zcab/12venzaV6awd Rep Power: 15	id like to see the dyno print off! what type was it on? __________________ One part rubber, three parts Krazy Glue.

06-20-2011, 01:43 PM	#96 (permalink)
Dsphoto Base Member Join Date: Sep 2010 Location: Suffolk cty New York Posts: 159 Drives: 10 BC 370ZR S/T M6 Rep Power: 14	Mustang. I will scan it tonight or tomorrow as soon as I have a chance. __________________ 78 Z1R, '08 ZX10R, 2010 BC Roadster S/T, 6M, Stillen G2 CAI, Invidia CBE, Berk test pipes, Painted headlights (180˚Custom), JDM rear fog, B&M short shifter, Stillen front plate mount, stubby antenna, setrab oil cooler, uprev. 337rwhp 254ft/lb corrected!

06-20-2011, 07:09 PM	#97 (permalink)
Joebarchuck Base Member Join Date: Aug 2010 Location: Los Angeles Posts: 202 Drives: 2010 370Z Roadster Rep Power: 14	Any convertible with an amuse wing or at least a big wing? __________________ Red 2010 370Z Roadster: Stillen G3, Stillen Exhaust, Up-Rev Tune (312 RWHP), Eibach Pro Springs, 20mm spacers front and back, Rear Camber Kit, Tinted Windows, GT-R Start Button, Interior Mods

06-21-2011, 01:12 PM	#99 (permalink)
Joebarchuck Base Member Join Date: Aug 2010 Location: Los Angeles Posts: 202 Drives: 2010 370Z Roadster Rep Power: 14	I like your spoiler but it won't pull off the amuse back bumper. I love the amuse back bumper but for sure the roadster does not pull it off from the pics I saw and the only reason is because of the angle that the amuse bumper has which is made to increase the angle of the coupe therefore the only way to pull the back amuse bumper off the roadster would be in my opinion to have a large wing such as the amuse wing. __________________ Red 2010 370Z Roadster: Stillen G3, Stillen Exhaust, Up-Rev Tune (312 RWHP), Eibach Pro Springs, 20mm spacers front and back, Rear Camber Kit, Tinted Windows, GT-R Start Button, Interior Mods

06-21-2011, 05:26 PM	#100 (permalink)
Fire A True Z Fanatic Join Date: Aug 2010 Location: WNY Posts: 4,117 Drives: 12 ZL1 6mt black Rep Power: 42	You will probably have to look into "universal" wings. Sorry cannot be alot of help here. __________________ 2012 Chevy Camaro ZL1 6MT coupe Back N' Black. 680hp

06-21-2011, 08:16 PM	#101 (permalink)
Dsphoto Base Member Join Date: Sep 2010 Location: Suffolk cty New York Posts: 159 Drives: 10 BC 370ZR S/T M6 Rep Power: 14	Dyno chart... __________________ 78 Z1R, '08 ZX10R, 2010 BC Roadster S/T, 6M, Stillen G2 CAI, Invidia CBE, Berk test pipes, Painted headlights (180˚Custom), JDM rear fog, B&M short shifter, Stillen front plate mount, stubby antenna, setrab oil cooler, uprev. 337rwhp 254ft/lb corrected!

06-22-2011, 07:26 AM	#103 (permalink)
jazz Track Member Join Date: Feb 2011 Location: barrie ON Posts: 910 Drives: 11Zcab/12venzaV6awd Rep Power: 15	WW good for you! i should see that number with my build too then. stillen g2 stillen headers stillen HFC HKS CBexhaust and custom UpRev __________________ One part rubber, three parts Krazy Glue.

06-22-2011, 07:26 AM	#104 (permalink)
Dsphoto Base Member Join Date: Sep 2010 Location: Suffolk cty New York Posts: 159 Drives: 10 BC 370ZR S/T M6 Rep Power: 14	The numbers tell only part of the story. The car pulls smoother and is much more responsive across the range. Low and mid range performance are substantially improved far beyond what the peak numbers show. Go for the uprev but make sure the tuner is good. Interaction between the different maps is very complicated. Good software poorly applied will yield less than stellar results. My two cents. __________________ 78 Z1R, '08 ZX10R, 2010 BC Roadster S/T, 6M, Stillen G2 CAI, Invidia CBE, Berk test pipes, Painted headlights (180˚Custom), JDM rear fog, B&M short shifter, Stillen front plate mount, stubby antenna, setrab oil cooler, uprev. 337rwhp 254ft/lb corrected!

06-22-2011, 03:25 PM	#105 (permalink)
jazz Track Member Join Date: Feb 2011 Location: barrie ON Posts: 910 Drives: 11Zcab/12venzaV6awd Rep Power: 15	ya man, i am so happy for you and your numbers! as soon as i get the issues with the car worked out ill be doing some pulls and we can have a dyno race! __________________ One part rubber, three parts Krazy Glue.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Custom HEADLIGHT Paint & Lighting MODIFICATIONS\|Photos & Details\|UPDATED SUMMER 2011	ONEighty	Body Interior/Exterior	362	01-07-2021 07:32 AM
which one to buy? the Infiniti G vert or the 370Z vert?	blitzebill	Nissan 370Z Roadster (Convertible)	83	08-03-2012 07:25 AM
My New Intake & Exhaust Mods Pics	SPOHN	Intake/Exhaust	16	03-14-2011 07:45 AM
2002 ZX-7R Kawasaki Ninja with Mods (pics inside!)	Mozen	Other Vehicle For sale	1	07-07-2010 02:45 AM
Some Nice Mods for the Nismo - Pics	mdbrich	Exterior & Interior	9	04-27-2010 08:01 PM