This maybe a problem no-one can solve literally !!!

sparky · 04-27-2013, 10:47 AM

Quote:

Originally Posted by diddy535

You need to have the garage door opener (remote) to program the homelink. It goes off of the signal the garage door remote sends and then mimics it which is how it opens your garage door. The way to program it requires you to hold and press the garage door remote and the homelink at the same time, while next to each other in the car. That's why you're not finding a signal when you try to program it - you need the remote to do it.

It's made to be a replacement for the remote or a connivence - like if you have a two car garage and one remote, you can program your 370z and leave the remote in your other car to use. It's not designed to be programed without a remote on hand.

I agree, not sure what the manual says but I needed to do it like this as well as the learn button. I was doing 2 cars at the same time so it got a little confusing but it did eventually work.
To OP you do have to hold homelink button down for 1 or 2 seconds to get the door to open and for me if you're too far away it won't work either.

njustidokite · 07-04-2020, 10:45 AM

https://www.geniedoor.com/support/pr...r-programming/

This helped solve my rolling code. Hope this helps

Naum16 · 04-09-2013, 10:47 PM

Thanks ill give it a try maybe that's the problem

bensonwilles · 04-23-2013, 03:35 AM

Hey Naum16!!
I think my suggestion might help you why don't don't you try to reprogram it??
This would definitely help you

If talking about me then I normally used to reprogram it when ever I used to face any kind of problem!!

zakimak · 04-24-2013, 10:07 PM

Scrolling code?.. if that's the case there should be a learning button on the garage opener that you must press in order for it to learn the sequence of the home link after you've already program it with the remote

04-23-2013, 03:35 AM	#4 (permalink)
bensonwilles Base Member Join Date: Apr 2013 Location: 75 T Laura St, Jacksonv Posts: 1 Drives: 04 Nissan 350Z CS M6 Rep Power: 14	Suggestion!! Hey Naum16!! I think my suggestion might help you why don't don't you try to reprogram it?? This would definitely help you If talking about me then I normally used to reprogram it when ever I used to face any kind of problem!! __________________ automatic gates

04-24-2013, 10:07 PM	#5 (permalink)
zakimak 6/2/80 - 9/29/14 - RIP Lukas Join Date: Jun 2011 Location: Ottawa, Ontario Posts: 450 Drives: ZR; Q45; VTR1K, GT65 Rep Power: 18	Scrolling code?.. if that's the case there should be a learning button on the garage opener that you must press in order for it to learn the sequence of the home link after you've already program it with the remote __________________ What doesn't kill you might make you a cripple so chose wisely. Free Stuff for Premium Members - Yeah Really

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Locked my key fob in the hatch. Literally.	marks370z	Nissan 370Z General Discussions	27	11-08-2012 06:01 PM
DFW Map Rally -- Can you solve it?	sccarally	Texas	1	05-19-2012 04:46 PM
Holy Crap! (Literally)	Ron	The Lounge (Off Topic)	24	06-23-2011 10:53 AM
Crap, we've been one-upped by Hyundai! (Literally)	flashburn	Other Vehicles	49	02-14-2011 10:36 AM
Internet tv, kicked the dish....literally	Carbon_z	The Lounge (Off Topic)	11	12-29-2010 04:06 PM

07-04-2020, 10:45 AM	#2 (permalink)
njustidokite Enthusiast Member Join Date: Oct 2010 Location: Long Island, NY Posts: 297 Drives: 09' 370z Blue,TS Rep Power: 16	https://www.geniedoor.com/support/pr...r-programming/ This helped solve my rolling code. Hope this helps

04-09-2013, 10:47 PM	#3 (permalink)
Naum16 Base Member Join Date: Mar 2013 Location: IN Posts: 152 Drives: 09 370z Rep Power: 14	Thanks ill give it a try maybe that's the problem