This maybe a problem no-one can solve literally !!!

Naum16

I don't have a garage remote opener that's why I wanna program my home link. I click the learn button on the garage door motor but never seems to find the signal. Starting to give up

gurneyeagle

Call the garage door opener company. Some of the newer ones have codes outside the normal range of HomeLink.

I live in a town home community where two phases were built six months apart. For some reason, Phase II has a different garage door opener that no one has been able to open via HomeLink.

Mine hooked up fine. We were even able to get a neighbor's car to open my garage door, so it's not a HomeLink problem.

__________________
Waiting on the Z35! SOLD - 2011 Gun Metallic Touring 7AT w Sports Pkg & Nav, Nismo Bumper and Rims, RC Grille, RC Brake Ducts, H&R Spacers, Painted Door Hdls, GTR Start Button, Nav By-Pass, EVO R Fog Light, CF Ducktail, CF Interior Trim

diddy535

You need to have the garage door opener (remote) to program the homelink. It goes off of the signal the garage door remote sends and then mimics it which is how it opens your garage door. The way to program it requires you to hold and press the garage door remote and the homelink at the same time, while next to each other in the car. That's why you're not finding a signal when you try to program it - you need the remote to do it.

It's made to be a replacement for the remote or a connivence - like if you have a two car garage and one remote, you can program your 370z and leave the remote in your other car to use. It's not designed to be programed without a remote on hand.

__________________

sparky

I agree, not sure what the manual says but I needed to do it like this as well as the learn button. I was doing 2 cars at the same time so it got a little confusing but it did eventually work.
To OP you do have to hold homelink button down for 1 or 2 seconds to get the door to open and for me if you're too far away it won't work either.

__________________
2012 370Z GM 7AT/JWM LEDs / 3M clear bra / 35% tint / GTR start button / FI CBE SS 18" RES / Momo shift knob / K & N Typhoon / Z1 hood struts / H&R 20mm f/r / illuminated kickplates

njustidokite

https://www.geniedoor.com/support/pr...r-programming/


This helped solve my rolling code. Hope this helps