What did you do with your Z today VI (ON TOPIC DISCUSSION ONLY)

Leingod · 12-16-2016, 07:22 AM

Quote:

Originally Posted by mishuko

Effective today the car is paid off! Now I can call my insurance broker and tell them to take my lienholder name off. I know the guy so I'm gonna leave a million messages

I heard you say my name 0_o

mishuko · 12-16-2016, 07:35 AM

Quote:

Originally Posted by Leingod

I heard you say my name 0_o

Lol nien! I'm just all happy n ****! Paid it off quicker than normal

JARblue · 12-16-2016, 09:36 AM

Got a big ol' roofing nail in my 1500 mile Pilot Sport A/S3's

On the shoulder. Attempted to plug it and blew at 80 PSI test

mishuko · 12-16-2016, 10:09 AM

Quote:

Originally Posted by JARblue

Got a big ol' roofing nail in my 1500 mile Pilot Sport A/S3's

On the shoulder. Attempted to plug it and blew at 80 PSI test

Fk kk kk

That's like when I got a sidewall puncture on my re11 half way thru my l zdayz road trip lol

God-Speed · 12-16-2016, 10:10 AM

Quote:

Originally Posted by JARblue

Got a big ol' roofing nail in my 1500 mile Pilot Sport A/S3's

On the shoulder. Attempted to plug it and blew at 80 PSI test

That sucks!! Sorry to hear that!

ChaseZ · 12-16-2016, 10:57 AM

Quote:

Originally Posted by JARblue

Got a big ol' roofing nail in my 1500 mile Pilot Sport A/S3's

On the shoulder. Attempted to plug it and blew at 80 PSI test

That sucks.

And reminds me I found a screw in my front 71R before I parked the car that I should pull off and bring it for a plug. Slow leak and car ain't leaving the garage so I'd forgotten all about it.

ChaseZ · 12-16-2016, 11:00 AM

Quote:

Originally Posted by mishuko

Fk kk kk

That's like when I got a sidewall puncture on my re11 half way thru my l zdayz road trip lol

Even worse when it's a sidewall

And EVEN worse when it's on a road trip to Zdayz!!

AntiVenom · 12-16-2016, 12:04 PM

received my moonbeam kit from carbon signal. unfortunately they decided to play with my emotions and not send the side blades. i have no doubt they will resolve the problem, but just had that WTF?! moment as i was unpacking everything.

B&W_Evader · 12-16-2016, 01:15 PM

Damn, that must of been loud!

JTM88 · 12-16-2016, 03:39 PM

Finished installing sport Akebonos on my Z. The stopping feels so much better than the worn out base brakes!

Sent from my iPhone using Tapatalk

ChopsZ · 12-18-2016, 05:24 PM

Went over to one of my friend's place the other night to check out the paint job he's done on my Shine Auto rear spats that I got with my Nismo wheels. They look great and can't wait to install them, though it'll be a month or more out since I drop off the Z at the dealership the second week of Jan to have them repaint the front and rear bumpers (factory known issue of the paint chipping off where the bumpers meet the fenders). It's only taken them 7 months to get around to doing it... Schmucks.

Also, went to another friend's personal shop last night (complete with above ground Atlas lift). He typically works on high dollar hot rods and old VW Bugs. Anyway, with a big 3/4" ratchet drive and a couple of 1/2" x 10" extensions, we were able to break loose the demon bolt on the driver's side. On the passenger side, we ended up snapping two sockets, a Snap-On and a Craftsman. It was getting late so we snugged the driver's side one back down and will be attacking it again this Wednesday.

He told me I'm not leaving Wednesday until my exhaust is making noise! LOL

Here's a pic of the spats before paint. He did a lot of prep to get these nice and smooth. Over the next couple of weeks, he'll take a little time here and there to wet sand them to match the rest of the car.

Jayhovah · 12-19-2016, 10:41 AM

25mm wheel spacers all around. I feel like it looks better, but makes my wheel gap much more pronounced. I have a set of SWIFTs in a box that will go in someday... Anyone here running swifts with 25mm spacers? Any concerns with rubbing?

Z_ealot · 12-19-2016, 11:27 AM

Temporarily fixed axle clicking on driver side of the Z, strangely enough the passenger side axle nut was nice and tight where as the driver side was able to be turned with only a quarter of my body weight on the torque wrench. Guess we'll see how long she holds like that.

blueranger · 12-19-2016, 09:15 PM

Installed Radium Engineering Oil Catch Cans

Sent from my iPhone using Tapatalk

axmea? · 12-19-2016, 09:41 PM

Quote:

Originally Posted by Z_ealot

Temporarily fixed axle clicking on driver side of the Z, strangely enough the passenger side axle nut was nice and tight where as the driver side was able to be turned with only a quarter of my body weight on the torque wrench. Guess we'll see how long she holds like that.

Did you use the kawasaki nut?

12-16-2016, 09:36 AM	#8793 (permalink)
JARblue A True Z Fanatic Join Date: Mar 2011 Location: Austin, TX Age: 43 Posts: 36,449 Drives: 11 Z34, 98 E36 M3 Rep Power: 2684440	Got a big ol' roofing nail in my 1500 mile Pilot Sport A/S3's On the shoulder. Attempted to plug it and blew at 80 PSI test __________________ 2011 370Z 6MT Sport Gun Metallic \| ARC \| CJM \| Ecutek \| FI \| Fujimura \| R2C \| SPL \| Stillen \| TWM \| Z1 \| ZSpeed \|

12-16-2016, 12:04 PM	#8798 (permalink)
AntiVenom Track Member Join Date: Nov 2014 Location: North Carolina Posts: 695 Drives: 2011 KAD 6MT Rep Power: 11	received my moonbeam kit from carbon signal. unfortunately they decided to play with my emotions and not send the side blades. i have no doubt they will resolve the problem, but just had that WTF?! moment as i was unpacking everything. __________________ The GREY GHOST Chronicle instagram: jdmunilla

12-16-2016, 01:15 PM	#8799 (permalink)
B&W_Evader Track Member Join Date: Aug 2011 Location: CA Posts: 972 Drives: slower than before Rep Power: 386	Damn, that must of been loud! __________________ \|RIP\|6spd-sport\|OSG-LSD\|XP8\|RBF600\|Eibach Sways\|RE-71R\|FI-34Row\|Gen3-CAI\|Yaw P.S.\|

12-16-2016, 03:39 PM	#8800 (permalink)
JTM88 Enthusiast Member Join Date: Oct 2016 Location: Houston, TX Posts: 276 Drives: 2012 370Z Rep Power: 13	Finished installing sport Akebonos on my Z. The stopping feels so much better than the worn out base brakes! Sent from my iPhone using Tapatalk onzedge likes this. __________________ 2012 Base Gun Metallic MT6 -CNT Racing CBE-Swift Sport Springs-Sport Akebono BBK-Z1 Motorsports Intakes-König Oversteer Wheels-1320 Resonated Test Pipes -RJM Rev 2.1 Clutch Pedal- Last edited by JTM88; 12-18-2016 at 07:01 PM.

12-18-2016, 05:24 PM	#8801 (permalink)
ChopsZ Track Member Join Date: May 2016 Location: Central Florida Age: 48 Posts: 965 Drives: 2016 370Z GM 6MT Rep Power: 2301	Went over to one of my friend's place the other night to check out the paint job he's done on my Shine Auto rear spats that I got with my Nismo wheels. They look great and can't wait to install them, though it'll be a month or more out since I drop off the Z at the dealership the second week of Jan to have them repaint the front and rear bumpers (factory known issue of the paint chipping off where the bumpers meet the fenders). It's only taken them 7 months to get around to doing it... Schmucks. Also, went to another friend's personal shop last night (complete with above ground Atlas lift). He typically works on high dollar hot rods and old VW Bugs. Anyway, with a big 3/4" ratchet drive and a couple of 1/2" x 10" extensions, we were able to break loose the demon bolt on the driver's side. On the passenger side, we ended up snapping two sockets, a Snap-On and a Craftsman. It was getting late so we snugged the driver's side one back down and will be attacking it again this Wednesday. He told me I'm not leaving Wednesday until my exhaust is making noise! LOL Here's a pic of the spats before paint. He did a lot of prep to get these nice and smooth. Over the next couple of weeks, he'll take a little time here and there to wet sand them to match the rest of the car. littlejuanito, Memphis370Z and MadSciSnails like this. __________________ She's For Sale! PERFORMANCE: Aero Workz \| Akebono \| BC Racing \| EcuTek \| HKS \| MaxBore \| Motordyne \| Nismo \| RJM \| SPL \| StopTech \| Z1 AUDIO: Arc Audio \| Bazooka \| Helix \| Pioneer \| Stereo Integrity

12-19-2016, 11:27 AM	#8803 (permalink)
Z_ealot A True Z Fanatic Join Date: Sep 2010 Location: Albuquerque, NM Posts: 2,045 Drives: 09 370Z Touring/Sprt Rep Power: 10090	Temporarily fixed axle clicking on driver side of the Z, strangely enough the passenger side axle nut was nice and tight where as the driver side was able to be turned with only a quarter of my body weight on the torque wrench. Guess we'll see how long she holds like that. axmea? likes this.

12-19-2016, 09:15 PM	#8804 (permalink)
blueranger Track Member Join Date: Aug 2012 Location: Albuquerque NM Posts: 577 Drives: 2010 Roadster 7AT Rep Power: 306	Installed Radium Engineering Oil Catch Cans Sent from my iPhone using Tapatalk __________________ F.I. Stage 1 Twin Turbo #48 \| E85 FlexFuel \| Built 7AT \| F.I. 34 Row Oil Cooler \| F.I. Flex Plate \| F.I. 19 row Trans Cooler \| MT ET Street S/S \| ECUTEK Tuned by Seb \| RPM Roll Bar

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[MAZOC] Official "Off-Topic" Discussion Thread	m4a1mustang	MAZOC	6670	09-06-2018 07:21 PM
The New "What did you do with your Z today" (with off topic replies) XIII	JARblue	The Lounge (Off Topic)	10011	08-04-2014 04:16 PM
What did you do with your Z today V (ON TOPIC DISCUSSION ONLY)	AK370Z	Nissan 370Z General Discussions	10148	06-19-2014 08:20 PM
The New "What did you do with your Z today" (with off topic replies) X	eastwest2300	The Lounge (Off Topic)	10036	02-18-2014 06:26 PM
The New "What did you do with your Z today" (with off topic replies) VIII	JARblue	The Lounge (Off Topic)	10016	11-10-2013 11:21 AM