What did you do with your Z today VI (ON TOPIC DISCUSSION ONLY)

Spooler · 07-01-2016, 12:58 PM

Went out and looked at my car. Dr's orders, can't lift anything over 15lbs, bend over, etc. NO Driving. This suxs.

Don-MT · 07-01-2016, 01:13 PM

Quote:

Originally Posted by Spooler

?...... Dr's orders, can't lift anything over 15lbs,.....

That happened to me once. I couldn't even go to the bathroom without help.

JesseG805 · 07-01-2016, 01:14 PM

Quote:

Originally Posted by ChaseZ

I'm not sold on this Injen long tube set up...

How the heck is it supposed to get air when it's practically sealed in once the bumper cover is back on???

Magic?

Sent from my SM-N920V using Tapatalk

njobe89 · 07-01-2016, 01:17 PM

because when it's sealed off, it's not 100% sealed off. there is still plenty of air around where it can get it from. The Acura RSX intake is almost exactly like that. only bad part is whenever it would rain my intake would get soaked and i would have to drive extra careful so that it doesn't suck water in. not sure if those would get wet as well on the 370z

madwi · 07-01-2016, 01:27 PM

Went for a fun little cruise today. It is about 74*, low humidity and a nice breeze, it doesnt get much better than this.

DeliriousClam · 07-01-2016, 01:35 PM

Quote:

Originally Posted by Spooler

Went out and looked at my car. Dr's orders, can't lift anything over 15lbs, bend over, etc. NO Driving. This suxs.

I know this feel. I had a ****** up knee, doctor told me no driving my car at least because it was a manual. I disregarded him and ended up having a really bad time

ChaseZ · 07-01-2016, 01:41 PM

Quote:

Originally Posted by njobe89

because when it's sealed off, it's not 100% sealed off. there is still plenty of air around where it can get it from. The Acura RSX intake is almost exactly like that. only bad part is whenever it would rain my intake would get soaked and i would have to drive extra careful so that it doesn't suck water in. not sure if those would get wet as well on the 370z

Rain wouldn't be an issue on this one. Not a chance. Literally the only open part is the gaps left around the tube going back into the engine bay.

I'll give it a try, but not terribly sold on the design. There might be a way to open it up into the grill inside the fangs, like how the Stillen brake duct works.

Will see what happens.

JARblue · 07-01-2016, 01:43 PM

Quote:

Originally Posted by ChaseZ

Rain wouldn't be an issue on this one. Not a chance. Literally the only open part is the gaps left around the tube going back into the engine bay.

I'll give it a try, but not terribly sold on the design. There might be a way to open it up into the grill inside the fangs, like how the Stillen brake duct works.

Will see what happens.

DIY: Fang Vents: Forced fresh air to your airbox

ChaseZ · 07-01-2016, 01:46 PM

Quote:

Originally Posted by JARblue

DIY: Fang Vents: Forced fresh air to your airbox

Yeah, just like that except instead of ducting up towards where the factory airbox would have been can cut a hole in the panel to the side and pump it into the new Injen filter location.

Would be pretty straight forward. Thanks for the link.

ChaseZ · 07-01-2016, 03:03 PM

The new Injen washer fluid bottle doesn't clear the LED lights in my bumper. Had to massage it in there.

But in any case it's in. Time for a shakedown run

Z_ealot · 07-01-2016, 06:19 PM

Quote:

Originally Posted by ChaseZ

I'm not sold on this Injen long tube set up...

How the heck is it supposed to get air when it's practically sealed in once the bumper cover is back on???

Same way the stock air intake setup does

Jayhovah · 07-01-2016, 09:49 PM

Took the day off work and spent the afternoon with the Z...Swapped my OEM plugs for GTR plugs... installed a CJM fuel tap with mini-pressure gauge... and installed the boost sensor for my boost gauge.

ChaseZ · 07-02-2016, 11:07 AM

Quote:

Originally Posted by Z_ealot

Same way the stock air intake setup does

Except that they go to different places and there is a block off plate in between - which I did remove when I buttoned it back up to be able to get some fresh air in there.

RumbleFish · 07-02-2016, 06:29 PM

got this installed. works beechin

Macman · 07-02-2016, 07:05 PM

Installed my Swift springs and 25/20mm wheel spacers. Makes a huge difference in the look of the vehicle for relatively cheap!

07-01-2016, 01:17 PM	#7669 (permalink)
njobe89 A True Z Fanatic Join Date: May 2014 Location: Atlanta, GA Posts: 5,227 Drives: 2013 370z BS 6MT Rep Power: 174283	because when it's sealed off, it's not 100% sealed off. there is still plenty of air around where it can get it from. The Acura RSX intake is almost exactly like that. only bad part is whenever it would rain my intake would get soaked and i would have to drive extra careful so that it doesn't suck water in. not sure if those would get wet as well on the 370z __________________ 2 plus 2 times 2 = ? ... hint, it's not 8 Stillen CBE, Stillen Gen 3, TP's, Uprev tuned - 324whp/264tq

07-01-2016, 01:27 PM	#7670 (permalink)
madwi A True Z Fanatic Join Date: Sep 2012 Location: West Michigan Posts: 31,400 Drives: Granma red Z Rep Power: 2684428	Went for a fun little cruise today. It is about 74*, low humidity and a nice breeze, it doesnt get much better than this. Hotrodz and ChaseZ like this.

07-01-2016, 03:03 PM	#7675 (permalink)
ChaseZ A True Z Fanatic Join Date: May 2016 Location: Calgary Posts: 3,799 Drives: 16 370z Rep Power: 94682	The new Injen washer fluid bottle doesn't clear the LED lights in my bumper. Had to massage it in there. But in any case it's in. Time for a shakedown run carlitos_370z and Silly Rabbit like this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[MAZOC] Official "Off-Topic" Discussion Thread	m4a1mustang	MAZOC	6670	09-06-2018 07:21 PM
The New "What did you do with your Z today" (with off topic replies) XIII	JARblue	The Lounge (Off Topic)	10011	08-04-2014 04:16 PM
What did you do with your Z today V (ON TOPIC DISCUSSION ONLY)	AK370Z	Nissan 370Z General Discussions	10148	06-19-2014 08:20 PM
The New "What did you do with your Z today" (with off topic replies) X	eastwest2300	The Lounge (Off Topic)	10036	02-18-2014 06:26 PM
The New "What did you do with your Z today" (with off topic replies) VIII	JARblue	The Lounge (Off Topic)	10016	11-10-2013 11:21 AM

07-01-2016, 12:58 PM	#7666 (permalink)
Spooler A True Z Fanatic Join Date: Jun 2014 Location: Ga Posts: 13,512 Drives: 2013 Nismo 370z Rep Power: 2684391	Went out and looked at my car. Dr's orders, can't lift anything over 15lbs, bend over, etc. NO Driving. This suxs.

07-02-2016, 07:05 PM	#7680 (permalink)
Macman Base Member Join Date: Apr 2016 Location: Nova Scotia Posts: 21 Drives: 16 370Z M6 Rep Power: 8	Installed my Swift springs and 25/20mm wheel spacers. Makes a huge difference in the look of the vehicle for relatively cheap!