Nissan 370Z Forum

Nissan 370Z Forum (http://www.the370z.com/)
-   Nissan 370Z General Discussions (http://www.the370z.com/nissan-370z-general-discussions/)
-   -   What did you do with your Z today VI (ON TOPIC DISCUSSION ONLY) (http://www.the370z.com/nissan-370z-general-discussions/91468-what-did-you-do-your-z-today-vi-topic-discussion-only.html)

mishuko 08-19-2016 07:54 AM

Quote:

Originally Posted by DeliriousClam (Post 3539152)
Why's that? It's not like someone is going to shove their face in the footwell and go "WHAT THE ****"

what about the girl? you know... road head and all...

nsfw sounds...then 'oooo shiny pedals'

:inoutroflpuke:

Quote:

Originally Posted by kenchan (Post 3539169)
if it dont bother u den okay. but my cars all have metal nice looking pedals to compliment the interior. u spent money on other bits, why halfarse the pedals?

agree... especially with the amount of work he's done.

imo his inside is tack cause ain't gold! jk. I like the work he has been doing.

Quote:

Originally Posted by ChopsZ (Post 3539292)
Being 6' 1" and 230 lbs, petite I am not, nor am I as flexible as I used to be. In short, I'm really not looking forward to installing this thing. But I'd rather take a couple hours (or more) and do it myself than pay someone to do it. At least, with me doing it, I know it's done right.

I'll definitely make note of your tips. Anything to make things go smoothly. Thanks!

If you don't have anything that height... try using gardening pads. I had about 3 laid out and some towels on the skirt part :tup:

Madwi has a good point too! lol I found it wasn't so much the side that hurt me it was the damn seat thigh supporting thingie jabbing my back that caused the most discomfort.

Kzonts 08-19-2016 08:33 AM

I would also suggest wearing long sleves. I got rug burn on my elbow pretty good. I also used a strap on light on my head.

kenchan 08-19-2016 09:56 AM

Quote:

Originally Posted by DeliriousClam (Post 3539185)
Because they are a part that are not going to be seen 90% of the time.

Da hell u talking about. With ur philosophy 99% of the time no one will see ur interior. Why bother doing anything! :D

ChaseZ 08-19-2016 10:01 AM

Quote:

Originally Posted by madwi (Post 3539348)
Don't be afraid to take the seat out to give you some room to turn wrenches. :tup:

I opted to leave the seat in. It wasn't too bad getting under there, and would have been fine if you could just do everything in one shot. It was the in/out in/out in/out from the awkward position that really sucked.

That and RJM must have a lot of sharp edges cause I sliced the heck out of my right hand lol

Reminds me I need to adjust it again today. Still trying to nail down exactly where I want it.

Kzonts 08-19-2016 10:37 AM

I left mine with the default setting but raised the pedal to the max. My wife and I both drive the car and I'm a good 10 inches taller. She drives with the seat all the way forward :-)

mishuko 08-19-2016 11:46 AM

I put my afp to 50. Initially set the pedal height to the lowest setting and let's say I was in awkward position. Put it to max and it's about aligned with the brake pedal and it's perfect!

My feminine fingers were sore from prying out th3 stoppers lol

ChaseZ 08-19-2016 11:54 AM

Quote:

Originally Posted by mishuko (Post 3539657)
I put my afp to 50. Initially set the pedal height to the lowest setting and let's say I was in awkward position. Put it to max and it's about aligned with the brake pedal and it's perfect!

My feminine fingers were sore from prying out th3 stoppers lol

That's strange. When I tried the pedal at max that way it was Wy above the brake pedal. I'm probably sitting around 3/4 of max right now, and going to adjust it closer to 1/2 to see how I like it, which should be about flush with the brake pedal.

My AFP currently at 90 but going to try that closer to 50/60 as well.

I used needle nose pliers for the stoppers ;)

killrain 08-19-2016 01:29 PM

So sitting in traffic last night for about 30 min, going from 0-15mph. Got on the highway and Z would not move any faster. Tried switching gears and still nothing. Then I remembered limp mode. Pulled over, turned her off for one minute and then back on. Everything was ok afterwards. I was scared. Temp only went up to 220.

DeliriousClam 08-19-2016 01:33 PM

Quote:

Originally Posted by kenchan (Post 3539546)
Da hell u talking about. With ur philosophy 99% of the time no one will see ur interior. Why bother doing anything! :D

I'm afraid to dumb it down to your level because I'm afraid of heights.

ChaseZ 08-19-2016 01:44 PM

Quote:

Originally Posted by killrain (Post 3539726)
So sitting in traffic last night for about 30 min, going from 0-15mph. Got on the highway and Z would not move any faster. Tried switching gears and still nothing. Then I remembered limp mode. Pulled over, turned her off for one minute and then back on. Everything was ok afterwards. I was scared. Temp only went up to 220.

Just sayin

https://www.stillen.com/performance/...ssan-370z.html

:tup:

killrain 08-19-2016 01:46 PM

Quote:

Originally Posted by ChaseZ (Post 3539733)

I KNOW!:yum:



IM JUST TO BROKE AT THE MOMENT........:shakes head:

Jayhovah 08-19-2016 01:48 PM

Quote:

Originally Posted by killrain (Post 3539726)
So sitting in traffic last night for about 30 min, going from 0-15mph. Got on the highway and Z would not move any faster. Tried switching gears and still nothing. Then I remembered limp mode. Pulled over, turned her off for one minute and then back on. Everything was ok afterwards. I was scared. Temp only went up to 220.

220? I hit 220 every time I drive in the summer.

killrain 08-19-2016 02:13 PM

Quote:

Originally Posted by jayhovah (Post 3539735)
220? I hit 220 every time i drive in the summer.

yeah so do i. Not sure what happened. Perhaps the continuous stopping and going?

mishuko 08-19-2016 02:34 PM

Quote:

Originally Posted by ChaseZ (Post 3539665)
That's strange. When I tried the pedal at max that way it was Wy above the brake pedal. I'm probably sitting around 3/4 of max right now, and going to adjust it closer to 1/2 to see how I like it, which should be about flush with the brake pedal.

My AFP currently at 90 but going to try that closer to 50/60 as well.

I used needle nose pliers for the stoppers ;)

well to be honest... I gotta double check. I'm pretty sure it was max height.

I did have needle nose pliers but the thing was a hard rubber and being a PITA. I literally had to put it down a few times. I found getting the pedal cover on without any warm soapy water easier than getting those fk'ers out!

Quote:

Originally Posted by killrain (Post 3539749)
yeah so do i. Not sure what happened. Perhaps the continuous stopping and going?

I hit 105*c and peaked a tad over 110 (220 to 230 F) and didn't hit limp... and this is in stop and go traffic too. oh and almost stalled, pumped the clutch down jammed the gas, then popped the clutch and did an awkward peel out. lol oops.

killrain 08-19-2016 02:50 PM

Quote:

Originally Posted by mishuko (Post 3539767)
i hit 105*c and peaked a tad over 110 (220 to 230 f) and didn't hit limp... And this is in stop and go traffic too. Oh and almost stalled, pumped the clutch down jammed the gas, then popped the clutch and did an awkward peel out. Lol oops.


im hoping it dosent happen again. If it does i may have an issue.


All times are GMT -5. The time now is 02:01 PM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 PL2