Yeah I can't wait to install them


Sent from my iPhone using Tapatalk

Finished up the wrap.

^^^^^^^^ Looks great ^^^^^^^^

Woo hoo - great day - just got shipping confirmation on my full carbon fiber vented Aerojacket fenders.

Like the look a lot! One of the cleanest white Z's I've seen.

^^ I love everything about that white Z....

But never been a fan of smoking/blacking out heqdlights and tails unless its factory and doesn't affect light output.

Sent from my SM-G860P using Tapatalk

The RE-71's sit in the garage. I looked wistfully at them. Can't wait to try them out.

What do you currently have?

Sent from my Nexus 5 using Tapatalk

RE71's... feels like im back in the 1990's :D

I was running the OE Bridgstone RE-050's on the stock sport rims up until August this year. I bought a set of Volk rims from a MAZOC member that came with some RE-11s. The fronts are OK but the rears are mostly gone. The RE-71's will go on the stock sport rims for autox. I had thought I would go with PSS for the Volk rims but not sure. They might rub with the +12 offset of the rear wheels.

imo 2nd set of 71's for the off days :happydance:

If they made them in the size I needed, I would consider it. No 305/30-19's yet.

Did an oil change and installed the Z Speed under tray.Was going to install my Z Speed insulated clutch hose but found out it already had an insulated hose on it.:ugh2: Did it come this way from the factory???:confused:

Installed these...

Took my sport wing off (it didnt survive) and installed a cf aero jacket type 3
http://puu.sh/kxJUE.jpg
http://puu.sh/kxJYv.jpg
http://puu.sh/kxJXl.jpg
http://puu.sh/kxJWP.jpg

:tup:

Picked up Stillen exhaust and Stillen G3 intake last night.

Couldn't be happier, was a local pickup 5min from home and got it all for less than half of what it would cost new...only 2000 miles on the items, look real good...

I need some new gaskets for the exhaust, should I go to dealership or order them from Stillen? Anyone that can chime in is greatly appreciated!

Anyone have any tips for install? Let me know please :tiphat:


Sent from my SM-G860P using Tapatalk

34,000 miles. 9th oil change. Ester every time.

Absolutely nothing done with the Z for 3 days due to a Nor'Easter and flooding in this area. Just happy the rain has stopped and hoping that the wind calms soon.

Ran her through the paces on the back roads this morning. Winter is around the corner so enjoying her while I can

Stillen G3 installed, washed, driven hard. Stillen exhaust install for next weekend...even more excitement

Sent from my SM-G860P using Tapatalk

Car looks great! Makes me miss my Mines spoiler.

Thanks man, it's definitely one of my favorite mods I've done to the car so far

QD'd and changed oil/filter, used pennzoil ultra platinum and purolator pureone Filter (pl14610) :tup:

Something is wrong, really wrong with Z owners. Spending all this time and money on a car....LOVE IT! Quite inspiring.

Bought the v2 zspeed aluminum under tray and carbon fiber front fang lip. I really want to carbon fiber the door handles and side mirrors but....the bank disagrees with me sometimes lol.

hit some deer guts sprawled out on the highway this morning. guy in front of me slowed down only a little so it was a surprise for me and there was a big semi in the lane next to me so I couldn't change lanes. it was dark so i'll look tonight to see if any guts splattered anywhere. luckily I didn't get an antler stuck in my tire like I did a few years ago with my bmw. that time I actually slid a whole lane onto the shoulder because of the guts. i'll check the tire pressure too. my low tire pressure warning lite came on a few days ago but that was just normal from laziness. now if it happened in reverse order i'd be worried. lol.

Installed the G1W-CB dash cam in my Z this afternoon (purchased here).

Currently it is using the 12V power under the glove box, but it will be hardwired eventually whenever I get around to installing the homelink mirror that's been sitting in my garage for several months now.

I was in Las Vegas this weekend for a softball tournament. I dove my truck so I could pickup so I could get some more e85 for the beast. 23 more gallons to add to my on hand supply!!! :driving:

Fired up the car tonight, just installed my new CJ Motorsport oil pan and FI oil cooler kit. Needed to get some antifreeze from Nissan today to finish it up.

So I had an sti and on the way to cruise with my buddy who just got a new evo x i hit a deer and a car doing 40 on a back road. Finally got the cars together! His is getting full tba and I am getting tint, swift springs, h&r 15mm spacers all around, stillen lw pulley, unorthodox lw alternator pulley and an oil change because the dealer loosened my drain plug when they were fixing csc???????????? Got that for free along with making them pay for motul 300. Ive had the car for a month and its been in the shop for 3 weeks but these 3 days were for the right reasons.http://i62.tinypic.com/xbz8u1.jpg

I am glad to see that your issues with your Z have not diminished your enthusiasm for it :tup: :driving:

motored my z last weekend, had a great drive.

this weekend will be the last drive of the season for my Z. will still drive my G around for a few more weeks before her hibernation.

Mr UPS guy dropped off a pair of Aerojacket carbon fiber vented fenders.:happydance:

Then this happened.



Dynojet dyno (STD smoothing: 5). Pulls were done in 4th gear.

Max Power 291.56 at 7.32 RPM Max Torque 249.14 at 4.31 RPM
Max Power 294.18 at 7.41 RPM Max Torque 250.91 at 4.42 RPM
Max Power 295.97 at 7.42 RPM Max Torque 250.82 at 4.36 RPM

Will post the chart later. All I have it a print out for now.

Mr UPS guy dropped off a pair of Aerojacket carbon fiber vented fenders.:happydance:

diamond gloss paint production and interior detail
 

Z got a yearly diamond gloss/interior cleaning from Ziebart, looks brand new

http://images.tapatalk-cdn.com/15/10...5da37ce0fe.jpg

Came out of the local stop and shop and met another member and his GF. Turns out he lives right down the street from me and We are two of 4 370z's in my small town. The


Sent from my iPhone using Tapatalk

Nice man! I am glad you finally got the fenders. :tup:

K & N PreCharger Air Filter Wraps for Stillen G3 Intakes
 

Finally got around to installing my Stillen G3 CAI yesterday. Been sitting in my garage for 6 months. Due to the "hassle" of pulling the front fascia to clean the air filters, I ordered K & N PreCharger wraps for the air filters as well. ( K & N part number 22-8044PK ). Less than $20 each too. They keep the big stuff out of them for sure and makes cleaning/recharging easier too. I have these on my Xterra as well and they work great. No restriction to airflow either. Basically they install like a ... condom. See attached pix for part numbers, etc.

2nd flat in 2mos...looks like about time for 4th pair of rear tires.....& some camber arms.Attachment 108560
I got a spare to mount up/ not hardly any better tread. Lol


Sent from my iPhone using Tapatalk

Never seen this before. Thought some people would like it :tup: