Stock hood alignment

DOOMMONKEY777

Just let go of the hood at about 10-13in above the normal closed position, just make sure u hold it with one hand and at hood center position, in case if it still does not close properly u can also twist bend it SLIGHTLY until u reach proper alignment, although you hood may be defective pics plz next time

__________________
Kids don't do Drugs, Drugs are bad, so let the professional druggies do Drugs for you. 537whp/496lb/tq@8-9PSI 93 octane

TerribleONE

I was kind of thinking maybe it got tweeked by being held up by the hood strut for an extended period of time? (It does get propped up from the drivers side)

__________________

DOOMMONKEY777

Unless you might have pushed on it from one end some how while it was in open position then yeah, but even in that case u can still twist it back to normal position. Or maybe ur latch is in closed position when u close the hood or defective plz chek be4 comeback.

__________________
Kids don't do Drugs, Drugs are bad, so let the professional druggies do Drugs for you. 537whp/496lb/tq@8-9PSI 93 octane