My motor is dropped, what parts would you change?

6spd · 08-16-2013, 03:30 PM

Quote:

Originally Posted by critical

where do i get one of these? sounds like a fun read/refrence book :P

lol, if i told you, i'd have to kill you.

DEpointfive0 · 08-17-2013, 12:21 AM

Quote:

Originally Posted by gbrettin

The Z1 Urethane mounts are really good. I have them in my car, motor and trans. My car has a slight vibration at times but nothing too bad.

If you end up going that route you shouldnt have to worry about them ever tearing again.

So... Getting the Momentums tomorrow-ish
TPs for it tomorrow-ish

Z1 urethane motor mounts (held off on trans)
Rear camber arms and tow bolts (sick and tired of tire changes)
Z1 brake booster hose to match my other Z1 blue hoses
eBay'd the 2 radiator hoses

And I just didn't like Z1's price on a PS cooler... For $200, I can hook up my spare 19 row, and it'd be just as cost effective, lol.

scope22 · 08-18-2013, 09:46 PM

Quote:

Originally Posted by ShutokuZ

Not sure how stiffer motor mounts would feel on a Z, but on my Evo, I had the front and rear mounts changed to 90A poly ones, and it caused strong cabin vibrations. I imagine the Z would absorb more of that however.

Yea, you do not want stiffer motor mounts or your car will vibrate...it sux, my brother did that to his audi and i didn't like and good luch trying to explain that to a potential buyer

DEpointfive0 · 08-20-2013, 12:02 AM

Update!
Ordered the headers!
FINALLY! Thank God

SS_Firehawk · 08-20-2013, 12:06 AM

What exhaust do you have? Thought u were gonna stick with HFC's? Regardless, it is gonna be sick!

DEpointfive0 · 08-20-2013, 12:07 AM

Quote:

Originally Posted by SS_Firehawk

What exhaust do you have? Thought u were gonna stick with HFC's? Regardless, it is gonna be sick!

I had HFCs for like 5000 miles, then TPs then stock cats, and now back to TPs

gbrettin · 08-20-2013, 11:27 AM

Quote:

Originally Posted by DEpointfive0

So... Getting the Momentums tomorrow-ish
TPs for it tomorrow-ish

Z1 urethane motor mounts (held off on trans)
Rear camber arms and tow bolts (sick and tired of tire changes)
Z1 brake booster hose to match my other Z1 blue hoses
eBay'd the 2 radiator hoses

And I just didn't like Z1's price on a PS cooler... For $200, I can hook up my spare 19 row, and it'd be just as cost effective, lol.

The dealer should quote you 30/45minutes @ hourly shop rate for changing the transmission mount when you do decide to go that route.

DEpointfive0 · 08-20-2013, 11:48 AM

Quote:

Originally Posted by gbrettin

The dealer should quote you 30/45minutes @ hourly shop rate for changing the transmission mount when you do decide to go that route.

I hopefully won't pay anything at my local shop

wstar · 08-20-2013, 11:58 AM

Honestly, the trans mount anyone could do at home with basic stuff. You need socket wrenches, a way to lift the car a little, and an extra bottle jack for the trans itself. You basically hold up the rear of the transmission with the bottle jack (not raise it, just hold it in place), and then the support bracket that usually holds it up (with the mount you're replacing) just unbolts from the bottom of the car, swap the mounts, put the support bracket back in, and you're done. There's like 4 bolts involved all total.

DEpointfive0 · 08-23-2013, 04:04 PM

Headers and Z1 parts are in hand!!!

AWSOME!!!

ShutokuZ · 08-23-2013, 05:28 PM

Congrats! Sounds like the car is going to be a beast when you are done!

andre12031948 · 08-23-2013, 06:42 PM

Quote:

Originally Posted by DEpointfive0

I had HFCs for like 5000 miles, then TPs then stock cats, and now back to TPs

I think you need a hubby

DEpointfive0 · 08-23-2013, 08:10 PM

Quote:

Originally Posted by andre12031948

I think you need a hubby

So confused

Trips · 08-23-2013, 08:33 PM

Andrew,

It sounds like she's going to be a blast once she's all done

08-20-2013, 12:02 AM	#49 (permalink)
DEpointfive0 Premium Member Bitches Join Date: Jan 2012 Location: SoCal Posts: 14,824 Drives: a lot Rep Power: 17151	Update! Ordered the headers! FINALLY! Thank God SS_Firehawk and ShutokuZ like this. __________________ Do YOU want to know what/where I got my username from? ( Click to show/hide ) NSFW due to language:

08-20-2013, 12:06 AM	#50 (permalink)
SS_Firehawk Premium Member Join Date: Oct 2011 Location: Tampa Posts: 4,142 Drives: 13' Magma Red Nismo Rep Power: 7334	What exhaust do you have? Thought u were gonna stick with HFC's? Regardless, it is gonna be sick! __________________ Old Car:GTM TSC'd 550whp / 410lbft tq @ 11.88PSI New Car: Under Construction

08-20-2013, 11:58 AM	#54 (permalink)
wstar A True Z Fanatic Join Date: Mar 2009 Location: Houston, TX Posts: 4,024 Drives: too slow Rep Power: 3594	Honestly, the trans mount anyone could do at home with basic stuff. You need socket wrenches, a way to lift the car a little, and an extra bottle jack for the trans itself. You basically hold up the rear of the transmission with the bottle jack (not raise it, just hold it in place), and then the support bracket that usually holds it up (with the mount you're replacing) just unbolts from the bottom of the car, swap the mounts, put the support bracket back in, and you're done. There's like 4 bolts involved all total. gbrettin and critical like this. __________________ 7AT Track Car! Journal thread / Car setup details

08-23-2013, 04:04 PM	#55 (permalink)
DEpointfive0 Premium Member Bitches Join Date: Jan 2012 Location: SoCal Posts: 14,824 Drives: a lot Rep Power: 17151	Headers and Z1 parts are in hand!!! AWSOME!!! ShutokuZ and critical like this. __________________ Do YOU want to know what/where I got my username from? ( Click to show/hide ) NSFW due to language:

08-23-2013, 05:28 PM	#56 (permalink)
ShutokuZ Track Member Join Date: Oct 2012 Location: Honolulu Posts: 512 Drives: 2013 PW 6MT Sport Rep Power: 13	Congrats! Sounds like the car is going to be a beast when you are done! DEpointfive0 likes this.

08-23-2013, 08:33 PM	#59 (permalink)
Trips Administrator Join Date: May 2009 Location: Disneyland, Ca Posts: 8,728 Drives: 🔰 Rep Power: 10	Andrew, It sounds like she's going to be a blast once she's all done __________________

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Dropped the dime	grant	Intake/Exhaust	7	11-25-2012 11:15 AM
Dropped on TEINs	PapoZalsa	Member's 370Z Gallery	15	09-20-2011 11:54 AM
Sticky for dropped Z's	Red__Zed	The370Z.com Feedback, Suggestions & Questions	0	08-03-2010 11:41 AM
Look what brown dropped off	MB370Z	Wheels & Tires	28	07-07-2010 01:56 AM
those with dropped cars...where do you get your oil change??	Soon	Engine & Drivetrain	9	06-29-2010 05:32 AM