What did you do with your Z today V (ON TOPIC DISCUSSION ONLY)

silentnightz · 05-10-2013, 12:46 AM

Edison had a small meet so I was there. My first meet with my z haha

chrischhorn · 05-10-2013, 05:00 AM

Swapped my Top Speed test pipes with Z1 pipes to see if it was part of my exhaust alignment issue. Sure enough it was. Swapped to the Z1 pipes with Momentum headers and everything lines up MUCH better then with Top Speed. Now there's less stress on my entire exhaust system so I don't have to worry about the flex pipes tearing from the engine torque. Before I had to use all my strength to force the bolt holes to line up. I was able to line up the bolt holes with literally 3 fingers with minimal force.

w0rM · 05-10-2013, 06:09 AM

Quote:

Originally Posted by blackcherry20

Now we need a pic of the oven mitt

swoopdeville · 05-10-2013, 07:27 AM

Had the steering lock recall taken care of and the latch spring bulletin.

Davey · 05-10-2013, 07:59 AM

Started driving to work... Stopped for gas... Getting back in the car I see what looks like a little dust/lint but actually turns out to be a couple of hairline scratches on the door just above the body line.

And yeah, they look like dust/lint because they're down to the primer. No idea how that happened.

Dr. Color Chip?

They're WAY too small for regular touch-up. I'm tempted to see how well black sharpie matches Black Cherry.

SPOHN · 05-10-2013, 09:11 AM

Just got my alumilite for my wind splitter.

Tigger · 05-10-2013, 09:37 AM

It's on!!! Woooo!!! Happydance? Yes, please.

tibal · 05-10-2013, 09:39 AM

Quote:

Originally Posted by Tigger

It's on!!! Woooo!!! Happydance? Yes, please.

Looks dope!!

CDepp · 05-10-2013, 10:48 AM

Quote:

Originally Posted by Tigger

It's on!!! Woooo!!! Happydance? Yes, please.

What bumper is that?!

SAmilitaryman · 05-10-2013, 02:48 PM

Ebc slotted rotors and ebc red stuff brake pads installed.

Sent from my DROID RAZR HD using Tapatalk 2

Tigger · 05-10-2013, 04:24 PM

Quote:

Originally Posted by CDepp

What bumper is that?!

It's the Stillen fascia! You can get one new, painted and installed for almost the cost of an OS Giken LSD! lol! Do I regret it? Not one freakin' bit. This fascia makes the car. Oh, and I thought it turned heads before. Nothing but broken necks on the way to work.

Tigger · 05-10-2013, 04:29 PM

Quote:

Originally Posted by SAmilitaryman

Ebc slotted rotors and ebc red stuff brake pads installed.

Sent from my DROID RAZR HD using Tapatalk 2

Waiz · 05-10-2013, 04:57 PM

Quote:

Originally Posted by SAmilitaryman

Ebc slotted rotors and ebc red stuff brake pads installed.

Sent from my DROID RAZR HD using Tapatalk 2

Lmk what you think of those, I need to swap out my StopTechs for something less dusty

I plan on giving the Z a little wash tonight, it actually rained earlier in the week

CSGLEON · 05-10-2013, 05:29 PM

installed the K&N typhoon intake on it today.

b15 · 05-10-2013, 05:31 PM

Added some sound deadening to the hatch and doors. I used Raammat BXT II and Ensolite foam over everything. I ordered too much of both so I was able to double up on most places and triple up on the really "hollow" areas. This car had NOTHING from the factory.
Before:

Installing BXT II

Ensolite on top of the BXT II

No pictures, but the doors are covered the same way. I actually went a little overboard on the doors and had to cut some back out so the panels would clip back on.

I know it's not the prettiest install, but it was my first time doing any type of sound deadening work. Overall the cabin/road noise is exactly where I want it. I took it for a drive on concrete roads and the "hollowness" in the back and much of the road noise was muffled vs before. Cruising at highway speeds is much better, the cabin just has muffled tire noise. It was pretty tedious cutting and sticking, but it was worth it. If I had to do it over again I would taken more time and laid it a little neater, but it's covered up anyhow so no one knows....but me

05-10-2013, 12:46 AM	#4246 (permalink)
silentnightz Base Member Join Date: Jan 2012 Location: North Jersey Posts: 90 Drives: 12 370z Silver Auto Rep Power: 13	Edison had a small meet so I was there. My first meet with my z haha __________________

05-10-2013, 05:00 AM	#4247 (permalink)
chrischhorn A True Z Fanatic Join Date: Jan 2012 Location: Mililani, HI Posts: 1,566 Drives: 2014 Juke Nismo RS Rep Power: 16	Swapped my Top Speed test pipes with Z1 pipes to see if it was part of my exhaust alignment issue. Sure enough it was. Swapped to the Z1 pipes with Momentum headers and everything lines up MUCH better then with Top Speed. Now there's less stress on my entire exhaust system so I don't have to worry about the flex pipes tearing from the engine torque. Before I had to use all my strength to force the bolt holes to line up. I was able to line up the bolt holes with literally 3 fingers with minimal force. __________________ R.I.P. 8/01/13 1SlowZ One day I'll have another....

05-10-2013, 07:27 AM	#4249 (permalink)
swoopdeville Base Member Join Date: Apr 2013 Location: Charlottesville, VA Posts: 19 Drives: '09 Black 6MT Base Rep Power: 12	Had the steering lock recall taken care of and the latch spring bulletin. blackcherry20 and CDepp like this.

05-10-2013, 09:11 AM	#4251 (permalink)
SPOHN A True Z Fanatic Join Date: Feb 2010 Location: Covington, GA Age: 45 Posts: 14,844 Drives: Waiting on next Z Rep Power: 221	Just got my alumilite for my wind splitter. __________________

05-10-2013, 05:31 PM	#4260 (permalink)
b15 A True Z Fanatic Join Date: Feb 2010 Location: Chicago Posts: 3,229 Drives: 4drz Rep Power: 36571	Added some sound deadening to the hatch and doors. I used Raammat BXT II and Ensolite foam over everything. I ordered too much of both so I was able to double up on most places and triple up on the really "hollow" areas. This car had NOTHING from the factory. Before: Installing BXT II Ensolite on top of the BXT II No pictures, but the doors are covered the same way. I actually went a little overboard on the doors and had to cut some back out so the panels would clip back on. I know it's not the prettiest install, but it was my first time doing any type of sound deadening work. Overall the cabin/road noise is exactly where I want it. I took it for a drive on concrete roads and the "hollowness" in the back and much of the road noise was muffled vs before. Cruising at highway speeds is much better, the cabin just has muffled tire noise. It was pretty tedious cutting and sticking, but it was worth it. If I had to do it over again I would taken more time and laid it a little neater, but it's covered up anyhow so no one knows....but me Footloose301, CDepp, Fountainhead and 1 others like this. Last edited by b15; 05-10-2013 at 05:34 PM.

05-10-2013, 07:59 AM	#4250 (permalink)
Davey A True Z Fanatic Join Date: Apr 2011 Location: Indiana Posts: 3,766 Drives: '15 NISMO 6MT Rep Power: 117171	Started driving to work... Stopped for gas... Getting back in the car I see what looks like a little dust/lint but actually turns out to be a couple of hairline scratches on the door just above the body line. And yeah, they look like dust/lint because they're down to the primer. No idea how that happened. Dr. Color Chip? They're WAY too small for regular touch-up. I'm tempted to see how well black sharpie matches Black Cherry.

05-10-2013, 05:29 PM	#4259 (permalink)
CSGLEON Base Member Join Date: May 2013 Location: austin Posts: 92 Drives: 12 370z silver Rep Power: 12	installed the K&N typhoon intake on it today.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
5D3 Discussion	FrancoPhoto	Photography	6	07-09-2012 12:08 AM
[Off Topic,GTA]Who dares to drive in the snow tonight with their Z?	Da.Menace	Canada	11	02-05-2011 05:43 PM
Double Din Dvd/Nav Feedback Topic	Carbon_z	Audio & Video	7	11-19-2010 11:10 AM
on the topic of oil ??	sonic370	Nissan 370Z General Discussions	5	07-17-2010 09:50 PM
Lounge (Off Topic) Rules	AK370Z	The Lounge (Off Topic)	0	09-23-2008 07:19 PM